Instruction/ maintenance manual of the product K950 Husqvarna
Go to page of 24
Oper ator’ s manual K950 Chain Read these instructions carefully and make sure you understand them before using the machine. English.
2 – English WARNING! The cut-off saw can be dangerous! Careless and incorrect use can result in serious or fatal injury to the operator or others. SYMBOL EXPLANA TION Symbols on the cut-off saw: Please read the instructions carefully and make sure you understand them before using the cut-off saw.
English – 3 CONTENTS List of Contents Symbol explanation ..................................................... 2 Safety instructions P ersonal protectiv e equipment ....................................... 4 The machine ’ s saf ety equipment ......
4 – English ! SAFETY INSTR UCTIONS ! ! WARNING! Incorrect or careless use of a cut-off saw can turn it into a dangerous tool that can cause serious or even fatal injury.
English – 5 1 Anti-vibration system Check the anti-vibration elements regularly for material cracks and deformation. Check that the anti-vibration elements are securely mounted between the engine unit and the handle system.
6 – English SAFETY INSTR UCTIONS GENERAL SAFETY INSTR UCTIONS IMPORTANT INFORMATION! Do not use the cut-off saw until you have read the entire contents of this Operator’s Manual.
English – 7 SAFETY INSTR UCTIONS GENERAL W ORKING INSTRUCTIONS This section takes up the basic safety precautions for working with the cut-off saw. Follow these general working instructions, but never use a machine without the possibility of calling for help in the event of an accident.
8 – English SAFETY INSTR UCTIONS WARNING! A safe distance from the cut-off saw is 15 metres. You are responsible that animals and onlookers are not in the working area. Do not start to work with the cut-off saw before the working area is clear and you have a firm foothold.
English – 9 SAFETY INSTR UCTIONS Safety Plan the work so that you do not get crushed by the bar when the pieces fall apart. Planning is also extremely important for your own safety! As it is usually.
10 – English SAFETY INSTR UCTIONS Sharpening diamond chains Chains can become dull when the wrong feeding pressure is used or when cutting some materials such as heavily reinforced concrete. To force a dull chain results in overheating and finally the loss of segments (part of the chain).
English – 11 SAFETY INSTR UCTIONS Diamond chains CUTTING EQUIPMENT CAUTION! Chain breakage can result in serious injury if the chain is thrown towards the operator. WARNING! Under no circumstances may the diamond chain saw be converted to cut other materials than those it is intended for.
12 – English WHA T IS WHA T? 1. Cylinder cover 2. Muffler 3. Fuel tank 4. Starter throttle catch 5. Choke 6. Throttle trigger lockout 7. Stop switch 8. Bar and chain 9. Water hose, quick connection 10. Chain tensioning handle 11. Counter screw 12. Throttle control 13.
English – 13 ASSEMBL Y How to tension the c hain Tighten the adjust screw. Close the adjust screw cover. Untensioned chain. Start with opening the adjust screw cover. Pull the handle backwards. Continue to move the handle down-wards until you start to tension the chain.
14 – English After adjustment, the chain tensioner handle should point nearly straight up (see figure) when it is moved as far as possible clockwise. NOTICE! During all reassembling, make sure that the outer cover fits in to the inner cover, the covers may be damaged otherwise.
English – 15 FUEL HANDLING ! Fuelling WARNING!The following precautions reduce the risk of fire: • Do not smoke or place any sources of heat in the vicinity of the fuel. • Never refuel when the engine is running. • Open the fuel cap slowly when fuelling so that any over pressure is released slowly.
16 – English Start and stop WARNING! Before starting observe the following: • Do not start the cut-off saw without the guide bar, chain and side cover fitted. Otherwise the clutch can come loose and cause personal injury. • Always move the cut-off saw from the filling area before starting.
English – 17 MAINTENANCE Carb uretor Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in.
18 – English Air filter The air filter should be cleaned regularly removing dust and dirt to avoid: • Carburettor malfunction • Starting problems • Reduced engine power • Unnecessary wear to.
English – 19 Replacing a broken or worn starter cord • Loosen the bolts that hold the starter against the crankcase and lift off the starter unit. • Pull out the cord approx. 30 cm and lift it out of the cut- out in the starter-pulley’s periphery.
20 – English MAINTENANCE Cooling system To maintain as low an operating temperature as possible the cut-off saw is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Air flow guide. 3. Cooling fins on the flywheel.
English – 21 MAINTENANCE Below follows some general maintenance instructions. If you need further information please contact your service workshop. W eekly maintenance 10. Check the back-up paper filter. 11. Check that the handles and the anti-vibration elements are not damaged.
22 – English TECHNICAL DA T A K950 Chain Engine Cylinder volume, cm 3/ cu.in 93,6/5,7 Cylinder bore, mm/inch ∅ 56/2,2" Stroke, mm/inch 38/1,5" Idle speed, rpm 2 500 rpm Recommended max.
English – 23 EU dec laration of conformity (Onl y applies to Europe) Husqvarna Construction Pr oducts, SE-433 81 P artille , Sweden , tel: +46-31949000, declare under sole responsibility that the cu.
´®z+R="¶6%¨ ´®z+R="¶6%¨ 2006-12-18 115 02 90-26.
An important point after buying a device Husqvarna K950 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna K950 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna K950 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna K950 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna K950 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna K950, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna K950.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna K950. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna K950 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
