Instruction/ maintenance manual of the product K 750 Husqvarna
Go to page of 12
SpeedMill 1 K 7 5 0 Spe e dMill IPL, K750, 2007-0 1, 544 9 3 62-01 K750 Rese r v dela r Spar e parts Ersa tzte ile Piec es d e r e cha nge Piez as d e r e pue sto Rica mbi P eç as s obr esse lente HUSQ V ARNA CONS TRUCTION P R ODUCTS 544 93 62 -01 Operator’s manual & spar e parts list.
2 SpeedMill T ABLE OF CONTENTS Section Page No. T able of Contents.............................................. 2 Contact Information.......................................... 2 Symbols............................................................. 3 Introduction.
SpeedMill 3 SAFETY SYMBOLS & DECALS 2 – English KEY T O SYMBOLS Ke y to symbols W ARNING! The machine can be a dangerous tool if used incorrectly or carelessly , which can cause ser ious or f atal injur y to the operator or others.
4 SpeedMill W ARNING! Before starting up machine make sure you completely read these instructions and the power cutter operation manual. Be familiar with operation of the machine before operation! Y our SpeedMill comes with two Operator ’s Manual’s.
SpeedMill 5 2 – English KEY T O SYMBOLS Ke y to symbols W ARNING! The machine can be a dangerous tool if used incorrectly or carelessly , which can cause ser ious or fatal injur y to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine .
6 SpeedMill WHA T IS WHA T WHA T IS WHA T (P ARTS IDENTIFICA TION) A. SpeedMill BLADE GUARD: Designed specically for the SpeedMill. One side is open to allow mounting of the SpeedMill Bowls. Read this Operation Manual for more information. See SpeedMill Spare Parts List in this docu- ment for part number .
SpeedMill 7 W ARNING! ONL Y CUT or BEVEL PVC plastic pipe with a machine equipped with a Speed Mill Accessory! DO NOT cut other materials with this machine! DO NOT cut or bevel ductile iron pipe with a machine equipped with a Speed Mill Accessory! DO NOT use machine as a standard power cutter with- out proper power cutter blade guard.
8 SpeedMill ASSEMBL Y AND OPERA TION Mount the SpeedMill Bowl Assembly . Align the slot in the SpeedMill Hub with the face of the shaft. Make sure the ange face of the SpeedMill Hub con- tacts the face of the blade. Install the blade shaft bolt into the Hub Assembly .
SpeedMill 9 OPERA TION Rotate Pipe and repeat this cut- ting process until pipe circum- ference is cut. W ARNING! HOLD MACHINE ONL Y at front and rear handles! NEVER bevel or cut material while holdin.
10 SpeedMill MAINTENANCE: CAUTION! Allow SpeedMill Bowls to cool before performing any main- tenance. NOTICE! DO NOT hold SpeedMill Bowls using a screwdriver or other device through the slots in the bowl. Damage to the bowls or abrasive coating could occur .
SpeedMill 1 1 SP ARE P ARTS.
12 SpeedMill 2007-10 115 07 95-27.
An important point after buying a device Husqvarna K 750 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna K 750 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna K 750 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna K 750 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna K 750 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna K 750, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna K 750.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna K 750. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna K 750 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
