Instruction/ maintenance manual of the product 535RXT Husqvarna
Go to page of 44
E E E E n n n n g g g g l l l l i i i i s s s s h h h h 535RX, 535RXT Oper ator’ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions before using the machine.
KEY T O SYMBOLS 2 – English Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine.
CONTENTS English – 3 Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control devices and system ma y be performed by any nonroad engine repair establishment or individual.
4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of muskets .
English – 5 WHA T IS WHA T? What is what on the brush cutter? 4 21 22 20 12 21 25 1 19 6 13 4 15 28 24 26 23 27 32 17 10 33 14 29 16 5 31 18 11 2 3 9 30 8 7 1 4 17 33 533RX 535RXT 1 T rimmer head 2 .
GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal protective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PRO TECTION Wear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection.
GENERAL SAFETY PRECA UTIONS English – 7 GLO VES Glov es should be wor n when necessary , e.g., when fitting cutting attachments. BOO TS Wear boots with steel toe-caps and non-slip sole . CLO THING Wear clothes made of a strong f abric and avoid loose clothing that can catch on twigs and branches.
GENERAL SAFETY PRECA UTIONS 8 – English be chec ked. See instructions under the heading Maintenance. Stop s witch Use the stop s witch to switch off the engine . Star t the engine and mak e sure the engine stops when you mov e the stop switch to the stop setting.
GENERAL SAFETY PRECA UTIONS English – 9 Quick release There is an easily accessible, quic k release fitted at the front as a safety precaution in case the engine catches fire, or in any other situation that requires y ou to free yourself from the machine and harness.
GENERAL SAFETY PRECA UTIONS 10 – English Locking n ut A locking nut is used to secure some types of cutting attachment. When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. T o remo ve it, undo the nut in the same direction as the cutting attachment rotates.
GENERAL SAFETY PRECA UTIONS English – 11 General rules Only use cutting attachments with the guards we recommend! See the chapter on T echnical data. K eep the teeth of the blade correctly shar pened! F ollow our instructions and use the recommended file gauge.
GENERAL SAFETY PRECA UTIONS 12 – English round file. The top edges must be filed down by the same amount for all the teeth. • Adjust the blade setting. This should be 1 mm. T rimmer head • Only use the recommended trimmer heads and trimmer cords.
ASSEMBL Y English – 13 Assembling the handlebar and throttle • Remov e the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar , (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar .
ASSEMBL Y 14 – English The guard extension is remo ved easily using the spark plug spanner , see illustration. Fitting a blade guar d, grass b lade and grass cutter • Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt.
ASSEMBL Y English – 15 • Inser t the loc king pin (C) in the hole to lock the shaft. • Place the blade (D) and support flange (F) on the output shaft. • Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit.
ASSEMBL Y 16 – English Adjusting the harness and brush cutter Standard harness Quick release At the front is an easily accessible, quic k release. Use this if the engine catches fire or in any other emergency situation that requires you to free y ourself from the machine and harness.
ASSEMBL Y English – 17 2 Tighten the chest strap under your left arm so that it fits closely around your body . 3 Adjust the shoulder strap to distribute the load e venly across your shoulders. Press downwards on the suspension hook to load the harness.
FUEL HANDLING 18 – English Fuel safety Nev er star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha ve spilled fuel on yourself or y our clothes, change your clothes. W ash any par t of y our body that has come in contact with fuel.
FUEL HANDLING English – 19 Mixing • Alwa ys mix the gasoline and oil in a clean container intended for fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.
ST AR TING AND ST OPPING 20 – English Check bef ore star ting • Check the b lade to ensure that no cracks hav e formed at the bottom of the teeth or by the centre hole.
ST AR TING AND ST OPPING English – 21 Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb . The b ulb need not be completely filled. Hold the body of the machine on the ground using your left hand (CA UTION! Not with your foot!).
W ORKING TECHNIQ UES 22 – English General working instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot affect y our control of the machine.
W ORKING TECHNIQ UES English – 23 W orking methods • Before y ou star t clear ing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc. • Star t at whichev er end of the area is easiest, and clear an open space from which to work.
W ORKING TECHNIQ UES 24 – English Forestry clearing using a sa w blade • The risk of blade thrust increases with increasing stem size. Y ou should therefore a void cutting with the area of the blade between 12 o’cloc k and 3 o’clock. • T o fell to the left, the bottom of the tree should be pushed to the right.
W ORKING TECHNIQ UES English – 25 still difficult to gain access, cut the stems high up and let them fall. This will reduce the risk of jamming. Grass clearing using a grass b lade • Grass blades and g rass cutters must not be used on woody stems.
W ORKING TECHNIQ UES 26 – English Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower . Keep the cord parallel to the ground when cutting. A void pressing the trimmer head against the ground as this can ruin the lawn and damage the tool.
MAINTENANCE English – 27 Carburetor Y our Husqvarna product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in.
MAINTENANCE 28 – English 4 If the star t throttle speed is too high, turn the adjuster screw A anticloc kwise until the cutting attachment stops. Then tur n adjuster screw A cloc kwise a fur ther 1/2 turn. Muffler CA UTION! Some mufflers are fitted with a catalytic conv er ter.
MAINTENANCE English – 29 Air filter The air filter must be regularly cleaned to remove dust and dir t in order to av oid: • Carburettor malfunctions • Star ting problems • Loss of engine power • Unnecessary wear to engine par ts • Excessive fuel consumption.
30 – English MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this manual.
English – 31 TECHNICAL D A T A T ec hnical data NO TE! This spark ignition system complies with the Canadian standard ICES-002. Note 1 Repor ted data for equiv alent sound pressure lev el for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).
32 – English TECHNICAL D A T A Appro ved accessories T ype Cutting attachment guard, Art. no. Centre hole in blades/cutters, Ø 25,4 mm Output shaft thread M12 Grass blade/g rass cutter Multi 255-3 .
FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT English – 33 Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (U.S . Environmental Protection Agency), CARB (California Air Resources .
FEDERAL AND CALIFORNIA EMISSIONS CONTR OL W ARRANTY ST A TEMENT 34 – English EMISSION W ARRANTY P ARTS LIST 1 Carburetor and internal par ts 2 Intake pipe, airfilter holder and carb uretor bolts. 3 Airfilter and fuelfilter cov ered up to maintenance schedule.
.
"Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S 3 5.
1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S 3 5 5.
T 3 5, T 3 5x "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4, 3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm.
"Clic" 1 2 3 5 6 7 9 10 m 3 2' 4 8 4, 3 m 14' 2,7- 3 , 3 mm .106-.1 3 " 10 cm 4" 6" 15 cm T45, T45x.
2,7- 3 , 3 mm .106-.1 3 0" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3 ,0 mm - 7,5 m 3 , 3 mm - 6,0 m 4 8 Auto 55.
1 2 3 4 5 6 7 8 9 3 5-50 NM ~ 15 cm 6' "Clic" ~ 3 ,5 m 11 ' 7,0 m 2 3 ' 2,4- 3 , 3 mm .095"-.1 3 0" 12 cm 5" T rimmy SII.
.
.
Original instructions ´®z+V!o¶5:¨ ´®z+V!o¶5:¨ 2010-11-22 1154017-95.
An important point after buying a device Husqvarna 535RXT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 535RXT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 535RXT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 535RXT you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 535RXT will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 535RXT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 535RXT.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 535RXT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 535RXT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
