Instruction/ maintenance manual of the product 450 Husqvarna
Go to page of 16
Operator’s Manual Read these instructions carefully and make sure you understand them befor e using the 450. Manuel d’utilisation V euillez lire attentiv ement ces instructions et assurez-vous de bien les comprendre a vant d’utiliser la machine modèle 450.
CONTENTS Content Page T able of contents ………………………….. 2 Unpacking .................................................. 2 T ransporting ............................................... 2 Sound Data .....................................
INTRODUCTION Common sense: The focus of this manual is HOW to operate and service the equipment safely . It is not possible to cover every conceivable situation you can face when using this equipment. Therefore use this product only in a manner described in this manual.
4 REGISTER THE PRODUCT Please register your new 450 with Husqvarna Construction Products by mailing in the registration card that came with the machine or you can register on the internet site www .husqvarnawarranty .com Registration will allow us to contact in case of any critical updates or recalls on this machine.
5 SAFETY W ARNINGS W ARNING Failure to comply with the following warnings could result in serious bodily injury or death! PERSONAL SAFETY • Read and understand instructions before operating saw . • Always wear safety approved hearing, eye, head and respiratory protection.
6 EXCEL SERIES BLADES The Excel Series of diamond blades have been designed specically for the Soff-Cut Ultra Early Entry dry cutting system of green concrete. These specialty blades are designed to increase speed and life while cutting a wide range of aggregates.
WHA T IS WHA T B F What is what? A. Oil ll & dipstick B. Air cleaner C. Fuel shut of f lever D. Fuel tank E. Oil drain hose F . Engine choke G. Hour meter/T achometer H. Hood I. Engine on/off switch J. Front guide K. Rear guide L. Recoil starter M.
8 OPERA TING INSTRUCTIONS Experience is very important when running the 450 saw . A skilled worker is highly recommended. Always do an inspec- tion of the saw before starting the engine. Open the hood (H) and check the fuel (D) and oil level (A) per the enclosed engine manual.
9 FUEL HANDLING PROPER FUEL T aking the following precautions will lessen the risk of injury and property damage: - Use extreme care in handling gasoline. It is extremely ammable and the vapors are explosive. - Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
10 Engine Oil Checking, Adding and Changing Oil Check the engine oil level (B) daily with saw fully lowered and the engine level. See the enclosed Robin manual for more details. Use SAE 10W-30 viscosity detergent automotive type with API service class SE or higher grade oil.
11 As concrete hydrates or cures and begins to set, it develops internal stresses which may cause random cracks. Random cracks cast doubt on the quality and workmanship of the concrete. Contraction joints are cut in concrete to relieve these stresses before they seek their own relief in the form of random crack.
12 “ The timing of concrete operations - especially nishing and jointing - is critical” , states a quote from the foreword of the American Concrete Institute (ACI) 302.1 R-96. It goes on to say that “Failure to address this issue can contribute to unde- sirable characteristics in the wearing surface as cracking.
13 TROUBLESHOOTING ENGINE RUNS ROUGH, BACK FIRES OR CAN NOT REACH FULL SPEED - Check if there is fuel in the tank and it is the correct fuel. Make sure there is no water in the fuel. - Check that the spark plugs are clean and properly gapped. - Check that choke is in the “off” position after engine is warm.
14 TECHNICAL SPECIFICA TIONS Weight and Dimensions 450 Weight – dry 132 lbs 60 kg Weight with gasoline and oil full 139 lbs 63 kg Length 34 inch 864 mm Width 19 inch 483 mm Height 21 inch 533 mm Blade Material cut Green concrete only Blade type 8.
15 W ARRANTY HUSQV ARNA EQUIPMENT W ARRANTY New 450 sold by Husqvarna Construction Products are warranted to be free from manufacturing defects in normal service for a period of six (6) months for labor and up to one (1) year on parts from date of purchase by the original consumer purchaser or date of introduction into rental company eet.
2009-13 505 41 78-08 Print ed In U.S.A..
An important point after buying a device Husqvarna 450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 450 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 450 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 450.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
