Instruction/ maintenance manual of the product 407 L Husqvarna
Go to page of 12
Husqvarna Outdoor Products Italia SpA Via Como, 72 23868 V almadrera LC IT ALIA Phone + 39 0341 203111 - Fax + 39 0341 581671 PN 249955 REV . 00 (10/06) HANDLEIDING BELANGRIJKE IMPORT ANTS: Lees deze handleiding aan- dachtig en zorg dat u ailes begrijpt alvorens de kettingzaag te gebrulken en be-waar ze voor toekomstige raadpleging.
A 13 14 17 D E E3 E4 1 ltr 20 cm 3 51 0 0 10 200 15 300 20 400 50:1 2% Partner oil 1 ltr 25 cm 3 41 0 0 51 2 5 10 250 20 500 40:1 2,5% 2 Strokes engine totally synthetic oil or McCulloch oil 12 11 11 .
E5 1 2 3 A B 1 2 3 E6 F1 F4 F5 F6 F2 F3 T H 15 cm 15 cm H2 G H I1 I2 L SUMMAR Y CHART TO IDENTIFY THE CORRECT GUARD NEEDED, WITH DIFFERENT CUTTING A TT ACHMENTS ÜBERSICHTST ABELLE ZUR AUSWAHL DES RIC.
W arning Safety apparel: Appr oved protective goggles or visor , approved hard hat and hearing protection. Read the instructions for the user carefully and make sur e you under- stand how all the controls work. Safety apparel: Appr oved gloves. Safety apparel: Appr oved boots.
Use of the manual • Anyone who uses the machine should have read the entire manual with extr eme care. • All users should be familiar with the operations for use of the machine under absolutely safe conditions as described in this manual, and should be instructed in the proper cutting techniques to use, possibly by practical demonstration.
ENGLISH - 3 machine on a flat, solid surface so that the motor can- not turn over , in a stable position with the motor off, the switch turned to O/STOP , the cutting tool stopped and wearing adequate protective gloves.
Safety lever Never use the machine with its Safety lever pressed with adhesive tape, string or other . This device serves to prevent accidentally pr ess- ing the throttle trigger (fig. A no. 3). In fact, the trigger (fig. A no. 3), can only be pressed if the safety lever is pressed at the same time (fig.
Harness CAUTION! It is very important to famil- iarize yourself with the release mecha- nism. In case of emergency you need to be able to release the machine quickly . The harness is equipped with a fasten-release mechanism. The harness enables the operator to support the machine during use (see “Safety pre- cautions”, B7).
ENGLISH - 6 E4. Assembly/disassembly of line cutter head Apply the nylon string head as shown in the illus- tration: 1) Upper plate 2) Protection (not supplied with all models) 3)Nylon string head.
Cutting techniques During the cutting operations, keep the engine running at high speed. After every cutting stage, decelerate the engine to minimum speed as running it at top speed without a load can damage the engine severely . W ait until the engine is running at minimum speed before moving the machine fr om one section to another .
Engine will Engine runs badly The machine not start or looses power runs but does when cutting not cut well • •• •• •• • • • The engine continues to have problems: contact your authorized supplier Check STOP switch is in the position I.
ENGLISH - 9 O. T echnical data Displacement (cm3) ....................................................................................................................... Bore (mm) .......................................................................
An important point after buying a device Husqvarna 407 L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 407 L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 407 L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 407 L you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 407 L will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 407 L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 407 L.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 407 L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 407 L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
