Instruction/ maintenance manual of the product 335LS Husqvarna
Go to page of 32
E E E E n n n n g g g g l l l l i i i i s s s s h h h h 335LS 335L X-series Oper ator’ s manual (EP A) Please r ead the operator’ s manual carefully and mak e sure y ou understand the instructions before using the machine.
2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or f atal injur y to the operator or others. Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine .
English – 3 CONTENTS Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control de vices and system may be perf ormed by any nonroad engine repair establishment or individual.
4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Husqv ar na product! Husqv ar na is based on a tradition that dates bac k to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , f or production of muskets .
English – 5 WHA T IS WHA T? What is what on the c learing saw? 20 23 24 1 T rimmer head 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handle adjustment 7 Loop.
6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A protectiv e helmet where there is a risk of falling objects HEARING PRO TECTION W ear hear ing protection that pro vides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed ey e protection.
English – 7 GENERAL SAFETY PRECA UTIONS CLO THING W ear clothes made of a strong fabric and av oid loose clothing that can catch on twigs and branches. Alwa ys wear heavy , long pants. Do not wear jewellery , shor ts sandals or go baref oot. Secure hair so it is abov e shoulder lev el.
8 – English GENERAL SAFETY PRECA UTIONS Cutting attac hment guard This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cr acked.
English – 9 GENERAL SAFETY PRECA UTIONS If the muffler on y our machine is fitted with a spar k arrestor screen this must be cleaned regularly . A bloc ked screen will cause the engine to ov erheat and may lead to serious damage.
10 – English ASSEMBL Y Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arro ws on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and scre w .
English – 11 FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate . 2 If you ha ve spilled fuel on y ourself or your clothes , change your clothes . W ash any part of your body that has come in contact with fuel.
12 – English FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.
English – 13 ST AR TING AND ST OPPING Chec k before starting • Check that the support flange is not crack ed due to fatigue or due to being tightened too much. Discard the suppor t flange if it is crac ked. • Ensure the locking n ut has not lost its captive f orce.
14 – English ST AR TING AND ST OPPING CA UTION! Do not pull the star ter cord all the way out and do not let go of the star ter handle when the cord is fully e xtended. This can damage the machine. CA UTION! Do not put any par t of y our body in marked area.
English – 15 W ORKING TECHNIQUES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine.
16 – English W ORKING TECHNIQUES Grass trimming with a trimmer head T rimming • Hold the trimmer head just above the g round at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Nev er press the cord into the area to be cut.
English – 17 MAINTENANCE Carb uretor Y our Husqv arna product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in.
18 – English MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First tur n the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops.
English – 19 MAINTENANCE Cooling system T o keep the w or king temperature as lo w as possible the machine is equipped with a cooling system. The cooling system consists of: 1 Air intake on the starter . 2 Cooling fins on the cylinder . 3 Cylinder cov er (directs cold air ov er the cylinder).
20 – English MAINTENANCE Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dir ty air filter . These f actors cause deposits on the spar k plug electrodes , which ma y result in operating problems and starting difficulties.
English – 21 MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine . Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this manual.
22 – English TECHNICAL D A T A T echnical data Note 1: Equiv alent noise pressure lev el is calculated as the time-weighted energy total f or noise pressure lev els under v ar ious working conditions with the follo wing time distribution: 1/2 idle and 1/2 max.
English – 23 FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), CARB (Calif or nia Air Resources Board) and Husqv ar na F orest & Garden are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine.
.
"Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35.
1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5.
T35 "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm.
"Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T45.
.
´®z+RC[¶5¨ ´®z+RC[¶5¨.
.
´®z+RC[¶5¨ 2006-12-05 ´®z+RC[¶5¨ 1150355-95.
An important point after buying a device Husqvarna 335LS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 335LS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 335LS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 335LS you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 335LS will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 335LS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 335LS.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 335LS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 335LS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
