Instruction/ maintenance manual of the product 325HS75X Series, 325HS99X Series Husqvarna
Go to page of 23
101 90 46-26 325HS75/HS99 Operator's Manual Please read these instructions carefully and make sure you understand them before using the hedge trimmer.
2 – English SYMBOL EXPLANA TION W ARNING! The hedge trimmer can be dangerous! Careless or incorrect use can result in serious, even fatal injury . Read through the O perator‘s Manual carefully and understand the content before using the hedge trimmer .
English – 3 CONTENTS List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment .
4 – English The machine’ s pr otective equipment This section describes the hedge trimmer ’ s protective equip- ment, its function and how checks and maintenance ar e carried out to ensure that it operates corr ectly . (See the chapter ”What is what” to locate where this equipment is positioned on your machine.
English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibra- tion-free and comfortable use as possible. The hedge trimmer ’ s vibration damping system reduces the transfer of vibrations between the engine/unit blades and the hedge trimmer ’ s handles.
6 – English SAFETY INSTR UCTIONS W ARNING! Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop.
English – 7 SAFETY INSTR UCTIONS 5. Muffler • N ever use a machine that has a defective muffler . • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly . A blocked screen leads to the engine overheating with serious damage as a result.
8 – English IMPORT ANT INFORMA TION • The machine is only designed for cutting branches and twigs. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of y our body .
English – 9 SAFETY INSTR UCTIONS Safety instructions when using the hedge trimmer ! Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine in front of you.
10 – English Basic working techniques • When cutting the sides of a hedge, work from the bottom upwards. When cutting horizontally, work from right to left. • Adjust the throttle setting to suit the load. • When trimming a hedge the engine should always be turned away from the hedge.
English – 11 16. Air filter cover 17. Spar k plug spanner 18. Allen key 19. Blade co ver (T ransport) WHA T IS WHA T? What is what on the hedge trimmer? 1. Operator ’ s Manual 2. Grease nipple 3. Gearbox 4. Blades 5. Hand guard 6. Handle 7. Cylinder co ver 8.
12 – English FUEL HANDLING • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 5 10 15 20 2% (1:50) 0,10 0,20 0,30 0,40 3% (1:33) 0,15 0,30 0,45 0,60 Gasolin Benzin Essence Gasolina Lit.
English – 13 ST AR T AND ST OP Control before starting • Inspect the working ar ea. Remove objects that can be thrown. • Check the blades. Nev er use blades that are dull, cracked or damaged. • Check that the hedge trimmer is in full working order .
14 – English Carburettor Y our H usqvarna product has been designed and manufac- tur ed to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in.
English – 15 MAINTENANCE Adjust the idling speed with the screw T , if it is necessary to readjust. F irst turn the idle speed adjusting screw T clockwise until the blades start moving. Then turn the screw anti-clockwise until the blades stop. The idle speed is correctly adjusted when the engine runs smoothly in every position.
16 – English Cooling system T o maintain as low operat- ing temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4.
English – 17 Gearbox There is a grease nipple (A) on the gearbox. U se a grease gun to top up with grease. This should be carried out after approximately ev er y 20 working hours. U se H usqvarna special grease, N o. 503 98 96-01. N ote that the gearbox must not be filled completely with gr ease.
18 – English Weekly maintenance Maintenance schedule Below follo ws some general maintenance instructions. If you need further information please contact your service workshop. MAINTENANCE 1. Check the starter , the starter cord and the return spring.
English – 19 Monthly maintenance MAINTENANCE 1. Clean the fuel tank. 2. Clean the carburettor and the area surrounding it. 3. Clean the fan wheel and the area around it. 4. Check the fuel filter and the fuel pipe, replace if necessary . 5. Check all cables and connections.
20 – English 325HS75 1,55/25,4 1,34/34 1,10/28 2 700 11 000 0,9 kW/ 9 000 rpm Ye s Ye s W albro MB/CD Champion R CJ 7Y 0,02/0,5 W albro WT 0,85/0,4 12,1/5,5 96 104 2,0/2,9 1,7/4,2 750 4 490 325HS99 .
EU declaration of conformity (Only applies to Europe) (Directive 98/37/EC, Annex II, A) We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel: +46 36-146500, declare under sole responsibility that the hed.
2000W03 ´*3$^¶6/¨.
We hope you find the links below useful. For further ga rdening information visit www.GardenResources.c o.uk Blower Vacs Brush cutters Brushcutters Chainsaws Chain saws Cultivators Cylinder lawn mower.
An important point after buying a device Husqvarna 325HS75X Series, 325HS99X Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 325HS75X Series, 325HS99X Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 325HS75X Series, 325HS99X Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 325HS75X Series, 325HS99X Series you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 325HS75X Series, 325HS99X Series will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 325HS75X Series, 325HS99X Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 325HS75X Series, 325HS99X Series.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 325HS75X Series, 325HS99X Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 325HS75X Series, 325HS99X Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
