Instruction/ maintenance manual of the product 325 LX Husqvarna
Go to page of 6
.
2 27033 325 LX Clean Sweep Assembly 1. Push one of the drum axles onto either of the two gearcase output shafts. If necessary, rotate the drum axle until the clevis pin hole in the axle aligns with the matching hole in the gearcase output shaft. 2. Use a clevis pin and hitch pin to secure the drum axle to the shaft.
3 The Clean Sweep works best when its rubber fins can quickly slide or “skim” over the surface being swept. New or replacement sweeper belts tend to grip or drag on hard surfaces, and should be thoroughly broken in or “scuffed” before the broom is actually put to work.
4 OPERATION Operating T echniques Operate the Clean Sweep at or near full throttle with its sweeper fins resting on the work surface. IMPORTANT! It is both tiring and unnecessary to lift or hold the fins from the work surface during sweeping.
5 OPERATION Operating and Safety T ips Maintain a shallow working angle. A steep working angle risks loss of control! Maintain a shallow angle to the work surface! A high angle of operation tends to propel the broom toward you, risking loss of control of the machine.
Husqvarna Pr i n t e d i n U . S . A ..
An important point after buying a device Husqvarna 325 LX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 325 LX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 325 LX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 325 LX you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 325 LX will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 325 LX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 325 LX.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 325 LX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 325 LX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
