Instruction/ maintenance manual of the product 23 COMPACT Husqvarna
Go to page of 15
Operator’s Manual Model: 23 Compact l Safety Rules l Assembly 0 Operation l Care and Maintenance WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. Failure to do so can result in serious injury. Husqvarna Forest & Garden Co.
Lookforthis symbol A to point out impor- tant safety precautions. It means: Attention! Become alert! Your safety is invofved. A WARNING: Always disconnect spark 1 lug wire when making repairs except car- uretor adjustments. Because a chain saw is a high-speed wood- cuttingtool, specialsafetyprecautionsmust be observed to reduce risk of accidents.
WARNING: m IS c h ain saw can be dangerous! Careless or improper use can cause serious or even fatal injury. Read and understand the Operator’s Manual before using the chain saw.
speed, there is greater chance of kick- back occurring. l Use extreme caution when reentering a cut. l Do not attempt cuts starting with the tip of the bar (plunge cuts). l Watch for shifting logs or other forces that could close a cut and pinch or fall into chain.
CHAIN BRAKE & CKA ANGLE A WARNING: me effectiveness of a chain brake in reducing operator injuries has not yet been fully determined. We can- not represent that a chain brake is an effec- tive safe device to prevent or reduce the hazard o injuries resulting from kickback.
Turn the adjusting screw to move adjust- ing pin to the back. Further adjustment may be necessary as you mount the bar. Mount the bar as illustrated. Slide the bar toward the back. Use the illustration of the chain to deter- mine the proper direction.
from heat and friction, and resists high temperature thinning. l Never use waste oil. l Stop the engine before removing caps. Fill the oil tank each time the fuel tank is filled l Pull the starter rope quickly with your right hand unbil the en f then push the cho ine attempts to start, e to the Off position.
chain moves have chain brake repaired by Authorized Service Dealer before use. Disengaged % m IMPORTANT POINTS . . . . . l . l . . . Cut wood only. Do not cut metal, plastics, masonry, non-wood building materials, etc. Stop the saw if the chain strikes a foreign object.
Hinge holds tree on stump and helps control fall Closing 0 notch control the direction of fall. Use wood or plastic wedges, but never steel or iron, to avoid kickback and chain damage. l Be alert to signs that the tree is ready to fall: cracking sounds, widening ofthefell- ing cut, or movement in the upper branches.
2nd cut collar from the trunk of the tree. Using a support stand, LIMBING AND PRUNING A WARNING: Never climb into atree to limb or prune. Do not stand on ladders, platforms, a log, or in any position whrch can cause you to lose your balance or con- trol of the saw.
ia~s~u te your chain and make cutting 9 Replace your bar if bent or the inside rails of the bar are worn. l Clean the oil holes and bar groove after each 5 hours of operation l Remove sawdust from bar groove period- ically with a wife or putty knife.
HUSQVARNA FOREST & GARDEN CO. WARRANTY STATEMENT Effective 02iS5 SECTION 1: LIMITED WARRAW Husqvama Forest 8 Garden Company (‘HusqvamaT warrants Husqvama product to the original purchaser to be .
IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTYOF MERCHANTABlLi-fYOR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT.
FOR CALIFORNIA RESIDENTS ONLY WHEN SEEKING SERVICE IN CALIFORNIA CALIF’ORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR Wm RIGHTS AND OBLIGATIONS The California Air Resources Board and@ Husqvarna Forest & Garden AB are pleased to ex- plain the emissions control system warranty on your 1995 lawn and garden equipment engine.
WHAT IS COVERED-- REPAIR OR REPLACEMENT OF PARTS- - Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna servicing center.
An important point after buying a device Husqvarna 23 COMPACT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 23 COMPACT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 23 COMPACT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 23 COMPACT you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 23 COMPACT will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 23 COMPACT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 23 COMPACT.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 23 COMPACT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 23 COMPACT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
