Instruction/ maintenance manual of the product 1151322-95 Husqvarna
Go to page of 44
E E E E n n n n g g g g l l l l i i i i s s s s h h h h 365 372XP Oper ator’ s manual (EP A I) Please r ead the operator’ s manual carefully and mak e sure you understand the instructions before using the machine.
KEY T O SYMBOLS 2 – English Symbols on the mac hine: W ARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine.
CONTENTS English – 3 Contents KEY T O SYMBOLS Symbols on the machine: ..................................... 2 Symbols in the operator’ s manual: ....................... 2 CONTENTS Contents ..........................................................
4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of muskets .
English – 5 WHA T IS WHA T? What is what on the c hain saw? 2 3 13 14 15 17 18 19 20 21 22 1 16 23 26 24 Husqvarna 372XP Husqvarna AB Huskvarna, SWEDEN XXXX XXXXXXX 25 24 362XP 365, 372XP 5 7 9 10 1.
GENERAL SAFETY PRECA UTIONS 6 – English Bef ore using a new c hain saw • Please read this manual carefully . • Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly . • Refuel and star t the chain saw .
GENERAL SAFETY PRECA UTIONS English – 7 Al ways use common sense It is not possib le to cov er every conceivab le situation you can face when using a chain sa w . Always e xercise care and use your common sense . A void all situations which y ou consider to be bey ond your capability .
GENERAL SAFETY PRECA UTIONS 8 – English • The chain brake (A) can either be activ ated manually (by y our left hand) or automatically by the iner tia release mechanism.
GENERAL SAFETY PRECA UTIONS English – 9 of the front hand guard, the chain brak e can only be activated b y the iner tia action. Will m y hand always activ ate the chain brake during a kickbac k? No . It tak es a cer tain force to mov e the hand guard forw ard.
GENERAL SAFETY PRECA UTIONS 10 – English chain saw , including the cutting equipment, is insulated from the handles by vibration damping units . Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conif ers).
GENERAL SAFETY PRECA UTIONS English – 11 gauge clearance. T oo large a clearance increases the risk of kickback. • Keep the chain pr operly tensioned! If the chain is slack it is more lik ely to jump off and lead to increased wear on the bar , chain and drive sprock et.
GENERAL SAFETY PRECA UTIONS 12 – English Sharpening y our chain and adjusting depth gauge setting General information on sharpening cutting teeth • Nev er use a blunt chain. When the chain is blunt you hav e to ex er t more pressure to force the bar through the wood and the chips will be very small.
GENERAL SAFETY PRECA UTIONS English – 13 General advice on adjusting depth gauge setting • When you sharpen the cutting tooth (A) the depth gauge setting (C) will decrease. T o maintain optimal cutting performance the depth gauge (B) has to be filed down to achie ve the recommended depth gauge setting.
GENERAL SAFETY PRECA UTIONS 14 – English Lubricating cutting equipment Chain oil Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather . As a chain saw manuf acturer we hav e developed an optimal chain oil which has a vegetab le oil base.
GENERAL SAFETY PRECA UTIONS English – 15 Chain drive sproc ket The clutch drum is fitted with one of the follo wing dr ive sprock ets: A Spur sprock et (the chain sprocket is welded on the drum) B Rim sprock et (replaceable) Regularly check the degree of wear on the drive sproc ket.
ASSEMBL Y 16 – English Fitting the bar and chain Check that the chain brak e is in disengaged position by moving the front hand guard tow ards the front handle. Remov e the bar nuts and remove the clutch co ver (chain brake). T ake off the transportation ring (A).
FUEL HANDLING English – 17 Fuel Note! The machine is equipped with a two-stroke engine and must alwa ys be run using a mixture of gasoline and two-stroke oil. It is impor tant to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained.
FUEL HANDLING 18 – English Fueling Clean the area around the fuel cap . Clean the fuel and chain oil tanks regularly . The fuel filter must be replaced at least once a year . Contamination in the tanks causes malfunction. Make sure the fuel is well mix ed by shaking the container before refuelling.
ST AR TING AND ST OPPING English – 19 Starting and stopping Cold engine Starting: The chain brake should be activated when star ting the chain saw . Activ ate the chain brake b y pushing the front hand guard forw ards. Ignition: Slide the ignition s witch to the left.
ST AR TING AND ST OPPING 20 – English throttle latch in order to a void unnecesser y wear on the clutch assembly . • Nev er star t a chain saw unless the bar , chain and all cov ers are fitted correctly . See instructions under the heading Assembly .
W ORKING TECHNIQUES English – 21 Bef ore use: 1 Check that the chain brak e works correctly and is not damaged. 2 Check that the rear right hand guard is not damaged. 3 Check that the throttle loc kout works correctly and is not damaged. 4 Check that the stop s witch works correctly and is not damaged.
W ORKING TECHNIQUES 22 – English 6 Before mo ving your chain saw s witch off the engine and lock the chain using the chain brak e. Carr y the chain saw with the bar and chain pointing bac kwards. Fit a guard to the bar before tr anspor ting the chain saw or carrying it for any distance .
W ORKING TECHNIQUES English – 23 user . If the saw chain is jamming, the saw ma y be pushed back at y ou. 8 Unless the user resists this pushing force there is a risk that the chain saw will mov e so far backw ards that only the kickbac k zone of the bar is in contact with the tree, which can lead to a kickbac k.
W ORKING TECHNIQUES 24 – English Limbing When limbing thick br anches you should use the same approach as for cutting. Cut difficult branches piece by piece . Cutting If you ha ve a pile of logs, each log you attempt to cut should be remov ed from the pile, placed on a saw horse or runners and cut individually .
W ORKING TECHNIQUES English – 25 Felling direction The aim is to f ell the tree in a position where you can limb and cross-cut the log as easily as possible.
W ORKING TECHNIQUES 26 – English Ne xt mak e the bottom cut so that it finishes exactly at the end of the top cut. The directional cuts should run 1/4 of the diameter through the trunk and the angle between the top cut and bottom cut should be 45 ° .
W ORKING TECHNIQUES English – 27 Freeing a tree that has fallen badl y Freeing a ”trapped tree” It is very dangerous to remov e a trapped tree and there is high accident risk. Nev er tr y to fell the tree that is tr apped. Nev er work in the risk zone of the hanging trapped tree.
W ORKING TECHNIQUES 28 – English was being used when the kic kback zone of the bar touched the object. Kickbac k only occurs if the kickback zone of the bar touches an object. Limbing Make sure that y ou can stand and move about saf ely . Work on the left side of the trunk.
MAINTENANCE English – 29 General The user must only carry out the maintenance and service work descr ibed in this manual. Carburetor adjustment Due to existing en vironmental and emissions legislation your chain sa w is equipped with movement limiters on the carburetor adjuster scre ws.
MAINTENANCE 30 – English High speed jet H At the factory the engine is adjusted at sea level. When working at a high altitude or in different weather conditions, temperatures and atmospheric humidity , it may be necessary to make minor adjustments to the high speed jet.
MAINTENANCE English – 31 Checking the inertia brake release With the engine turned off, hold the chain sa w over a stump or other firm object. Let go of the front handle so that the bar drops towards the stump as the chain sa w rotates around the rear handle.
MAINTENANCE 32 – English Chain catcher Chec k that the chain catcher is not damaged and is firmly attached to the body of the chain saw . Right hand guar d Chec k that the right hand guard is not damaged and that there are no visible def ects, such as cracks .
MAINTENANCE English – 33 use a muffler if the spark arrestor screen is missing or defective. The muffler is designed to reduce the noise le vel and to direct the exhaust gases a way from the oper ator. The exhaust gases are hot and can contain sparks, which ma y cause fire if directed against dry and combustible material.
MAINTENANCE 34 – English Changing a br oken recoil spring • Lift up the star ter pulley . See instr uctions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the star ter housing. • Remov e the cassette with the recoil spr ing from the star ter .
MAINTENANCE English – 35 Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dir ty air filter . These factors cause deposits on the spark plug electrodes, which ma y result in operating problems and star ting difficulties.
MAINTENANCE 36 – English Cooling system T o keep the working temperature as low as possible the machine is equipped with a cooling system. The cooling system consists of: 1 Air intake on the starter. 2 Air guide plate. 3 Fins on the flywheel. 4 Cooling fins on the cylinder .
MAINTENANCE English – 37 Electrical carb uretor heating (372XPG) On models with the designation CARBURET OR HEA TING there is an electrically heated carburetor. Electrically powered heating pre vents ice formation in the carburetor . A thermostat regulates the heating so that the carburetor alwa ys has the right working temperature.
38 – English MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. Daily maintenance Weekl y maintenance Monthly maintenance Clean the outside of the machine.
English – 39 TECHNICAL D A T A T echnical data 365 372XP Engine Cylinder displacement, cu.in/cm 3 3,97/65,1 4,31/70,7 Cylinder bore, inch/mm 1,89/48 1,97/50 Stroke, inch/mm 1,42/36 1,42/36 Idle spee.
40 – English TECHNICAL D A T A Recommended original and replacement bar and c hain combinations These Husqvarna chain saw models are in the ANSI category of saws abov e 3,8 cu. in. and are not required to comply with low kickbac k performance requirements.
FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT English – 41 Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Husqv ar na Forest & Garden are pleased to e xplain the emissions control system warr anty on your 2001 and later small nonroad engine .
´®z+S@=¶5k¨ ´®z+S@=¶5k¨ 42 – English AMERICAN ST AND ARD SAFETY PRECA UTIONS Saf ety precautions f or chain saw users (ANSI B 175.1-2000 Anne x C) Kickbac k safety precautions With a basic understanding of kic kback, you can reduce or eliminate the element of surpr ise.
.
1151322-95 ´®z+S@=¶5k¨ ´®z+S@=¶5k¨ 2008-09-18.
An important point after buying a device Husqvarna 1151322-95 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna 1151322-95 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna 1151322-95 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna 1151322-95 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna 1151322-95 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna 1151322-95, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna 1151322-95.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna 1151322-95. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna 1151322-95 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
