Instruction/ maintenance manual of the product ME003-01 Hunter Fan
Go to page of 8
ME003-01 r090414 Piccolo • Operation • Assembly • Installation Owner’ s Manual Ceiling Fan Revolutions 1 Piece 120V ~ 60Hz 10 lbs (4.5 kg) Product: T rademark: Quantity: Electrical Rating: W e.
ME003-01 09/04/2014 2 Y ou have chosen the best. Y our new Revolutions ceiling fan will provide you with many years of comfor t and satisfaction. Congratulations! Read and Sav e These Instructions This product conforms t o UL Standard 507. W ARNINGS w .
ME003-01 09/04/2014 3 1. Unpack your fan and check the contents. Do not discard the box. If warranty replacement or repair is ever necessar y , the fan should be returned in its original packaging. Remove all par ts and hard- ware. Do not lay the motor housing on its side; the decorative casing may shift.
ME003-01 09/04/2014 4 OFF T urn Pow er 1. T o avoid possible electrical shock, be sure electricity is turned off at the main power panel before wiring. AII wiring must be in accordance with national and local electrical codes, and the ceiling fan must be grounded as a precaution against possible electrical shock.
ME003-01 09/04/2014 5 Mounting the Fan Wiring the Fan W ARNING : The fan must be hung with a least 2,1 m of clearance from oor to blades. 1. Remove the three pre-installed screws from the motor hanging bracket.
ME003-01 09/04/2014 6 Installing the Blades Assembling the Motor Housing 1. Raise the fan so that the motor bracket meets the mounting bracket. Align the three screw holes. 2. Install the screws you kept from “Mounting the Fan.” (Fig. 4) 3. Lift the Motor Housing over the fan motor .
ME003-01 09/04/2014 7 Operating the Fan Reversing the Fan ON T urn Power 1. T urn power on at the the main fuse box. 2. T urn on the wall switch. Fan Pull Chain Speed Control: 1.
ME003-01 09/04/2014 8 T roubleshooting Maintenance F AN IS NOISY 1. Use of standard light rheostat or continuously variable fan speed wall control will always cause har- monic distortions or a huming noise. Many fan motors do not work quietly with solid state variable controls.
An important point after buying a device Hunter Fan ME003-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter Fan ME003-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter Fan ME003-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter Fan ME003-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter Fan ME003-01 will certainly help you make a decision on the purchase.
If you already are a holder of Hunter Fan ME003-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter Fan ME003-01.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter Fan ME003-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter Fan ME003-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
