Instruction/ maintenance manual of the product HDPVR-1000C Humax
Go to page of 97
HD Digital Recor der HD-PVR The default passwor d is 0000. Standardlösenordet är 0000. U ser ’ s Manual /An vändarmanual HDPVR-1000C.
GB1 User’ s Manual Notice Thank you f or purchasing a HUMA X product. Please read this user’ s manual carefully t o be able to safely install, use and maintain the product at maximum performance. Keep this user’ s manual next to your product for future r eference .
Notice GB2 User’ s Manual W arnings, C autions and Notes Throughout the whole manual, pa y special attention to the follo wing marks that indicate hazardous situations. • W arning Indicates a hazardous situation which could result in serious injury .
GB3 User’ s Manual This product has been manufactured to comply with international saf ety standards. Please read the following saf ety precautions carefully . Safety Instructions and Precautions 1. MAINS SUPPL Y 90-250V a.c., 50/60Hz • Operate this product only from the type of power supply indicated on the marking label.
Safety W arning GB4 User’ s Manual 10. LIGHTNING, ST ORM or NOT IN USE • Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges .
GB5 User’ s Manual C ont ents 1. Before U sing the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7 1.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C ont ents GB6 User’ s Manual 7. Pref erences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB38 7.1 Par ental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB7 User’ s Manual This chapter pro vides detail instructions on the product and its accessories. 1.1 Package C ontents Please check all package contents before using your pr oduc t. Note: • F aults may occur if the remote contr ol is left without batter y for a long time .
1. Before Using the P roduc t GB8 User’ s Manual 1.2 F ront P anel 1. ST ANDBY BUTTON Switches between operation and standby modes . 2. REC ORD BUTTON Records programme. 3. MENU BUTTON Displays the menu. 4. OK/LIST BUTTON Con rms the selected operation or displays the channel list in normal viewing mode.
1. Before Using the P roduc t GB9 User’ s Manual 1.3 Conditional A ccess Although some T V and radio ser vices ar e free to air , others are available on a subscription basis and can only be enjoyed via a Conditional A ccess component. The Conditional A ccess component is a remo vable Smartcard.
1. Before Using the P roduc t GB10 User’ s Manual 1.4 Rear Panel 1. CABLE IN Connects an antenna cable. 2. CABLE OUT ( TV/VCR or L OOP OUT ) Connects to the RF IN of the T V or VCR using an RF cable. 3. ETHERNET Ethernet port (for future use). 4. T V SCART Connects to the T V using a T V SCART cable.
1. Before Using the P roduc t GB11 User’ s Manual 1.5 Remote Con trol Note: • The remote c ontrol of the product is subject to change without notice. • This remote c ontrol can also control y our T V , DVD and audio. T o set the remote control f or your T V , DVD and audio, please r efer to 14.
1. Before Using the P roduc t GB12 User’ s Manual 7. C OL OUR BUT T ONS g. RED Displays the channel list in normal viewing mode . h. GREEN Displays the fa vourite channel list in normal viewing mode. i. YELL OW Displays the HD channel list in normal viewing mode .
1. Before Using the P roduc t GB13 User’ s Manual 18. NEXT Goes to the next chapter . 19. PREVIOUS Goes to the previous chapter . 20. SL OW Plays the prog ramme in slow motion. 21. SUBTITLE Displays the subtitle language list. 22. A UDIO Displays the audio list.
1. Before Using the P roduc t GB14 User’ s Manual 1.6 Remote Con trol Batteries 1. Press do wn the top of the battery cover and slide the cov er o . 2. Inser t the new batteries . Make sure the plus (+) ends meet the plus markings on the batter y case.
GB15 User’ s Manual This chapter describes how to c onnect your product to the T V with the par ticular equipments for gaining optimum signal quality . The pr oduct provides various interfaces to connect to the T V , VCR or other devices. Select the most appropriate proc edure depending on the equipment you hav e.
2. Setup GB16 User’ s Manual 2.2 Using D VI Con verter The DVI connection using an HDMI to DVI conv er ter is recommended f or Digital TV . I n case the T V has a DVI input connector , connect the product to the T V with an HDMI cable using an HDMI to DVI con verter as follows .
2. Setup GB17 User’ s Manual 2. When there is no A/V receiv er available In case you are not equipped with an A/V receiv er , connect the product and the TV using an audio cable as follows . 1. Connect your CA T V line to the CABLE IN. 2. Connect the product and the T V using an RCA cable.
2. Setup GB18 User’ s Manual 2.3 Using C omponent Cable The component connection is recommended f or Digital TV . Connect the produc t and the T V using a component cable as follow s. 1. Connect your CA T V line to the CABLE IN. 2. Connect the product and the T V using a component cable.
2. Setup GB19 User’ s Manual 2.4 Using SCART Cable A SCART cable connection is recommended for analogue T V or VCR. Connect the produc t and the T V using a SCART cable as follows . 1. Connect your CA T V line to the CABLE IN. 2. Connect the product and the T V using a SCART cable.
2. Setup GB20 User’ s Manual 2.5 P owering On 1. Connect the power cor d of the product to a wall outlet. 2. T urn on the power switch located at the back left side of the product. 3. Po wer on by pressing the ST ANDBY button of the remot e control or the ST ANDB Y button at the front of the product.
GB21 User’ s Manual 3. Installation W izard When powering on your pr oduc t for the rst time after purchase, the installation wizard will operate automatically . Tip: The default password is 0000 . If you ha ve forgotten your passw ord, please contact your local product distributor .
3. Installation W izard GB22 User’ s Manual 3.3 Display Display enables you to set the screen ratio , display format and resolution of the scr een. Select the value for Screen Ratio , Display Format and Resolution . Select Nex t and press the OK button.
3. Installation W izard GB23 User’ s Manual 3.5 Result After all setting is complete, y ou can view the result screen. Select Finish and press the OK button to complet e the installation wizard. 3.6 Installation Checklist Before using the pr oduct, please make sure that you have c ompleted the following st eps.
GB24 User’ s Manual This chapter describes the basic functions the product provides such as switching channel , volume control and other common featur es. 4.1 Switching Channel Y ou can switch the current channel by pressing the CH+/CH- button or ent ering the channel number directly using the NUMERIC(0-9) buttons.
4. Basic Opera tion GB25 User’ s Manual 4.4 Sleep Y ou can set the automatic turn o time. Press the SLEEP butt on while watching a programme to set the sleep time. Each time y ou press the SLEEP button, the sleep time changes in the following sequence: 10, 20, 30, 60, 90, 120 minutes.
4. Basic Opera tion GB26 User’ s Manual 4.6 Audio Y ou can select the language you prefer in Audio if the current pr ogramme is available in multiple audio languages. 1. Press the AUDIO button. 2. Select the audio language you prefer . 3. Select audio direction (lef t, right, ster eo) using the / button.
4. Basic Opera tion GB27 User’ s Manual 4.8 T eletext All teletext supporting channels have the teletext icon on the i-plate. 1. Press the TELETEX T button. 2. T o display the teletext menu, press the MENU button in teletext mode. 3. Select the teletext func tion you want and pr ess the OK button.
4. Basic Opera tion GB28 User’ s Manual 1. Channel number and name 2. Prog ramme name 3. Icons Displayed only when the channel is a locked channel . Displayed only if the prog ramme is reser ved f or recording . Represents parental lev el. Indicates the minimum level of age for viewing the programme.
GB 2 9 User’ s Manual This chapter will help you manipulat e the channel list. Y ou can display the channel list by pressing the O K button while watching a programme . Six types of channel lists are provided f or quick and easy channel search. M y TV ( RED ) TV : T he list of all TV channels.
5 . Channel List GB 30 User’ s Manual 1 . Option 1. Select a channel and press the OPT + button. 2. T o add the channel to the favourite gr oup, select F a v ourite . Select the group using the / button and press the O K button. 3. T o lock the channel, select Lo ck and press the O K button.
5 . Channel List GB 31 User’ s Manual 5 . 2 Fa v ourite List F avourite List is the list of the favourite channels you can select yourself from the entir e channel list. Ther e are ve fav ourite groups in total. 1. Press the O K button while watching a programme.
5 . Channel List GB 32 User’ s Manual 5 . 4 Histor y List History List is the list of the most or recently watched channels. 1. Press the O K button while watching a programme. 2. Press the B LU E button to displa y the history list. 3. Press the B LU E button again and select Most Vie wed and Recently V iewed using the / button.
GB 33 User’ s Manual The T V Guide displa ys the programme inf ormation of each channel, in time and date order . Y ou can customize your o wn programme guide to list the channels or prog rammes of interest to y ou and schedule your viewing using the programme inf ormation.
6. TV G uide GB 34 User’ s Manual 2 . Instant Reser v ation 1. Select a programme in the EPG table and press the REC ORD button. T he selected programme will become reserved and the recording ic on will appear immediately . 2. T o cancel the reser vation, select the programme and pr ess the ST OP button.
6. TV G uide GB 35 User’ s Manual 1 . Editing Reser v ations 1. Select a reser vation you want t o edit and press the O K button. The reservation popup will appear . 2. Select Channel and press the O K button to displa y the channel list. Select the channel.
6. TV G uide GB 3 6 User’ s Manual 6. 4 F ind Find enables you t o nd the programme you want by ent ering the genre, name , time and day of the programme. 1. Press the G UIDE button. 2. Press the B LU E button to nd programme. 3. Enter the keyword, genr e, time & day of the pr ogramme and select Search and then press the O K button.
6. TV G uide GB 37 User’ s Manual 3 . Search b y Time and Da y 1. Press the O K button while the cursor is on Time & Day . 2. The time & day popup will appear . Selec t the time and day using the O K and / button. 3. Select OK and press the O K button.
GB 38 User’ s Manual 7 . Pr eferenc es In this chapter you can set parental contr ol, language setting, time setting , media setting, A/V setting and other con guration items to keep limitations where y ou want them for the viewers . Note : P ress the E X IT button to save the changes and return t o the previous menu.
7 . Pr eferenc es GB 3 9 User’ s Manual 2 . Change Pass w ord Change Password allo ws you to change the curr ent password . 1. Select Change Passw ord and press the O K button. 2. Enter the password in Ne w Password using the NUMERIC ( 0 -9) buttons.
7 . Pr eferenc es GB 40 User’ s Manual 7 . 2 Language Setting Language Setting enables you to set the basic language and subtitle options such as menu language , audio language, subtitle language, subtitle displa y and subtitle font. 1. Press the MENU button.
7 . Pr eferenc es GB 41 User’ s Manual 3 . Subtitle Language Subtitle Language is the subtitle language that is selected automatically when the channel is changed. 1. Select Subtitle Language and press the O K butt on. 2. Select the subtitle language you want and press the O K button.
7 . Pr eferenc es GB 42 User’ s Manual 7 . 3 T ime Setting Time Setting allows y ou to set the current time and set the time you want t o turn the product on or o . 1. Press the MENU button. 2. Select Preferences using the / button and press the O K button.
7 . Pr eferenc es GB 43 User’ s Manual 3 . Po w er OFF Y ou can select the time the produc t turns o automatically . 1. Select Pow er OFF . 2. Enter the powering o time using the NUMERIC ( 0 -9) buttons or select Disable using the O K or / button.
7 . Pr eferenc es GB 44 User’ s Manual 7 . 4 Media Setting Tip : The default password is 0000 . 1. Press the MENU button. 2. Select Preferences using the / button and press the O K button. 3. Select Media Setting using the / button and press the O K button.
7 . Pr eferenc es GB 45 User’ s Manual 3 . Recording Options Y ou can set the recording padding time in case the rec ording starts earlier or ends later than scheduled. 1. Select Start/End Padding and press the O K button. 2. Select the padding time using the O K or / button.
7 . Pr eferenc es GB 4 6 User’ s Manual 7 . 5 A / V Setting Y ou can con gure the audio and video output settings. 1. Press the MENU button. 2. Select Preferences using the / button and press the O K button. 3. Select A/V Setting using the / button and press the O K button.
7 . Pr eferenc es GB 47 User’ s Manual 3 . Audio Output Y ou can select the audio output option. 1. Select Audio Output . 2. Select Stereo or Mono using the O K or / button. 4 . Dolb y Digital Output Y ou can set Dolby Digital automatically .
7 . Pr eferenc es GB 48 User’ s Manual 7 .6 Other S ettings Y ou can con gure other settings such as info display time and OSD transpar ency. 1. Press the MENU button. 2. Select Preferences using the / button and press the O K button. 3. Select Other Settings using the / button and press the O K button.
GB 4 9 User’ s Manual 8 . Edit Channels In this chapter you can edit all channels in the channel list or make changes to the fav ourite lists of the channels you hav e chosen. Note : • Press the E X IT button t o save the changes and return t o the previous menu.
8 . Edit Channels GB 50 User’ s Manual 2 . Selec ting a Channel G roup 1. Press the G REEN button to display the list of groups. 2. Select the group you want and press the O K button. 3 . Selec t / Release All 1. T o selec t all channels , press the Y ELL O W button.
8 . Edit Channels GB 51 User’ s Manual 8 . 2 Edit Fa v ourite List Y ou can add or remove channels from the fa vourite gr oups, move fa vourite channels, rename fav ourite groups and mov e the favourite groups. 1. Press the MENU button. 2. Select Edit Channels using the / button and press the O K button.
8 . Edit Channels GB 52 User’ s Manual 4 . Renaming Fa v ourite G roups 1. Select the favourite group y ou want to rename and press the O K button. 2. Press the B LU E button. 3. Select Rename Group and press the O K butt on. 4. A keyboard will appear .
GB 53 User’ s Manual In this chapter you can con gure the installation setting and per form channel search. Menus such as channel search, software update and default setting are included in this section. Note : P ress the E X IT button to save the changes and return t o the previous menu.
9. Installation GB 54 User’ s Manual 9. 2 Soft w are Upda te Software Update allows you to update the syst em software. 1. Press the MENU button. 2. Select Installation using the / button and press the O K button. 3. Select Software Update using the / button and press the O K button.
GB 55 User’ s Manual 10 . S y stem 10 . 1 Status Y ou can view the model name, software version, loader version, system ID , STB ID , Chip ID , update date, Micom version and MA C address of the product. 1. Press the MENU button. 2. Select System using the / butt on and press the O K button.
10 . S y stem GB 5 6 User’ s Manual 10 . 3 Conditional A ccess 1. Press the MENU button. 2. Select System using the / butt on and press the O K button. 3. Select Conditional Ac cess and press the O K button. 1 . Subscription Status Y ou can view the subscription status of the channels subscribed.
10 . S y stem GB 57 User’ s Manual 5 . Maturit y Rating Y ou can change the maturity rating setting. 1. Select Maturity Rating and press the O K button. 2. Select Change Maturity Rating and select the rating value using the O K or button. 6. Messages Y ou can view the conditional access messages.
GB 58 User’ s Manual There are f our t ypes of lists f or di erent kinds of media les. Y ou can display each list by pressing the colour buttons on the remote c ontrol.
11 . Media List GB 5 9 User’ s Manual 1 . Pla y Option 1. Select a recorded le you want to playback and press the O K button. A popup will appear to display the play option. 2. Select Play from the start and press the O K button to play the r ecorded le from the beginning.
11 . Media List GB6 0 User’ s Manual 3 . Option 1. Select a le in the video list and press the OPT + button. 2. T o lock the le, selec t Lo ck and press the O K button. When unlock ing a locked le, you will be prompted to enter y our password.
11 . Media List GB6 1 User’ s Manual 4 . Edit Mode Y ou can edit more than one le at the same time using edit mode. 1. Press the EDIT button while displaying the video list. 2. Select the les to edit and press the O K button. 3. T o delete a le, press the RED button.
11 . Media List GB6 2 User’ s Manual Note : When deleting or moving a locked le, you will be prompted t o enter your passwor d. Enter the password using the NUMERIC ( 0 -9) buttons . Tip : The default password is 0000 . 11 . 2 Radio Press the G REEN butt on while displaying the media list to display the radio list.
11 . Media List GB6 3 User’ s Manual 4 . Edit Mode Y ou can edit more than one le at the same time using edit mode. 1. Press the EDIT button while displaying the radio list. 2. Select the les to edit and then press the O K button. 3. T o delete les, press the RED button.
11 . Media List GB6 4 User’ s Manual 11 . 3 Music Press the Y ELLO W button while displaying the media list to display the music le list. T he music le list is displayed as the f ollowing. 1. First g roup name 2. Pa th of present folder 3. Icon of parent f older 4.
11 . Media List GB6 5 User’ s Manual 3 . Option 1. Press the OPT + button while displaying the music list. 2. T o delete the le, selec t D elete and press the O K butt on. A popup will appear . Select Ye s and press the O K button. 3. T o rename the le, select R ename and enter the name directly using the keyboard displayed on the screen.
11 . Media List GB66 User’ s Manual 11 . 4 Photo Press the B LUE button while displaying the media list t o display the photo le list. The phot o le list is similar to the music le list. 1 . Pla y Option 1. Select a photo le you want to view and press the O K button.
11 . Media List GB6 7 User’ s Manual 4 . Photo Vi e w er 1. Select the image le you want and press the O K button to enlarge the image . 2. Press the E X IT button to close the viewer . Press the PLA Y button to go back. 3. Go to previous le or nex t le using the / buttons.
GB6 8 User’ s Manual 12 . P ersonal V ideo Recorder ( PVR ) The product automatically saves the pr ogramme to the built-in hard disk drive temporarily; this enables you to pause, pla y, fast rewind or fast f or ward the current br oadcast. 12 . 1 Pla y bar Press the PLA Y button while watching a recording t o display the play bar .
12 . P ersonal V ideo Recorder ( PVR ) GB69 User’ s Manual 2 . TSR Y ou can per form fast r ewind, fast forward, slow motion and pause while pla ying back a recorded le from the media list. F ast Fo r w ard 1. Press the F AST FOR W ARD button to fast forward the programme.
12 . P ersonal V ideo Recorder ( PVR ) GB 70 User’ s Manual Pause 1. Press the P AUSE button to pause the curr ent programme. 2. If you press the P AUSE button onc e again, the programme is resumed fr om that point. Note : P ause makes the time gap or delay between the broadcasting (live) point and watching point.
12 . P ersonal V ideo Recorder ( PVR ) GB 71 User’ s Manual 2 . Multi - Channel Recording 1. T o record another channel, change channels while recording and pr ess the RECORD button again.
12 . P ersonal V ideo Recorder ( PVR ) GB 72 User’ s Manual 12 . 4 B ookmark 1 . Adding B ookmark Y ou can jump to a position directly using the bookmark feature in recorded le playback. Use book marks to search a speci c scene quick ly and con veniently .
GB 73 User’ s Manual 13 . Soft w ar e Update In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest new s and newly released software versions. ( http:// ww w .
GB 74 User’ s Manual 14 . 1 Menu Map 1. Par e ntal Control 2. Language S etting 3. Time Setting 4. Media Setting 5. A/V S etting 6. Other Settings Prefer ences 1. Edit Channel List 2. Edit F avourite List Edit Channels 1. Channel S earch 2. Soft war e Update 3.
14 . Appendi x GB 75 User’ s Manual 14 . 2 T rouble Shooting Before c ontacting your local ser vice c entre, please read the tips belo w carefully. If the problem persists after completing the following pr ocedure, please c ontact your local product distributor or service centre for further instructions.
14 . Appendi x GB 7 6 User’ s Manual 10 . Cannot w atch pa y channels . • Check in the menu that you have a valid and w ork ing subscription to the channels you wish to view . • Contact your network operator for mor e information. 11 . Cannot record progammes .
14 . Appendi x GB 77 User’ s Manual 14 . 3 Error Message Error message P ossible causes W hat to do No or bad signal The cable is not connected. Make sure the cable is connected correctly . The cable may be damaged or defective. Ex change the cable.
14 . Appendi x GB 78 User’ s Manual 14 . 4 . Speci cation T uner & Channel No of T uners 2 Input Connector F- T ype, IEC 169-24, F emale Fre q uenc y Range 51MHz to 858MHz Signal Le v el -15.
14 . Appendi x GB 7 9 User’ s Manual Data Por t US B USB 2.0 Host (5V 500mA Max.) Po w er Suppl y Input Voltage 100-240 a.c ., 50/60Hz T y pe SMPS Po w er Consumption Max. 38W Protection Separate internal fuse & lightning protection Ph y sical Speci cation Si z e 380mm × 70mm × 281mm W eight ( Net ) 3.
14 . Appendi x GB 80 User’ s Manual 14 . 5 G lossar y 1 . Dolb y Digital An encoding system that digitally c ompresses up to 5.1 discrete channels of audio (left front, c entre, right front, left surround, right surr ound) into a single Bitstream.
14 . Appendi x GB 81 User’ s Manual 13 . SCART A 21-pin connector standard to connect two pieces of Audio-V isual equipment such as a TV and a VCR. Each device will have a 21-pin f emale connec tion; a cable with male connection at both ends is used for connecting the devices.
14 . Appendi x GB 82 User’ s Manual 14 .6 Ser v ice and Support Information concerning troubleshooting , sof tware upgrade and pr oduc t support is provided in the following w ebsites and call centers. Should y our produc t r equire warranty ser vice , please contac t HUMA X to obtain the appropriate authorization.
14 . Appendi x GB 83 User’ s Manual Suomi Puh : Aukioloajat : K ieli : +358 9 56186 130 ma-pe 8:00-16:00 Suomi/Englanti Austria Te l : Opening Hours : E - mail : W ebsite : Language : 0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 support@humax- digital .
14 . Appendi x GB 84 User’ s Manual 14 . 7 Remote Co ntr ol Co de List 1 . Using the uni v ersal remote co ntrol 1. Press the MODE button. T he remote control LED will blink onc e. 2. Press the MODE button for 3 seconds until the T V LED turns on. The LED will stay on even after the button is released.
14 . Appendi x GB 85 User’ s Manual B utton T V DVD A UDIO - PLA Y - - F AST FORW ARD - RECORD STOP P AUSE RED RED GREEN GREEN YELL OW YELL OW BL UE BLUE EXIT EXIT CLEAR OK OK OK OK UP UP UP UP LEFT.
14 . Appendi x GB 8 6 User’ s Manual B ASIC LINE 004, 064 B AUR 018, 087, 097, 099, 102, 108, 175, 176, 177, 178, 181, 185 B A Y SONIC 052 B EAUMAR K 050 B EC 099, 110, 124 B ECRESE 040, 099, 108, 1.
14 . Appendi x GB 87 User’ s Manual CARVER 023, 046 CASCADE 004 CA THA Y 018 CCE 063, 018, 078 CCI 115 CENTURION 018 CENTUR Y 159, 160 C G E 101, 123 CIE 133, 161 CIMLINE 004, 117 CINERAL 029, 084, .
14 . Appendi x GB 88 User’ s Manual FRA B A 161 FRONTECH 042, 071, 099 FU J ITSU 028, 051, 124, 172, 177 FUNAI 047, 051, 052, 071, 118, 172, 177 FUTURETECH 052 G ALA X IS 123, 142, 158, 161 G ALA XY.
14 . Appendi x GB 8 9 User’ s Manual K MC 033 K OLSTER 158 K ONI G 004, 005, 017, 018, 042, 061, 068 K ORPEL 018 K ORTIN G 098, 160 K O Y ODA 004 K TV 015, 019, 052, 056, 063, 074, 172, 177 K U B A .
14 . Appendi x GB9 0 User’ s Manual ON W A 052 OPTIMUS 038, 044, 070 OPTONICA 030, 043 ORA VA 161 ORION 018, 049, 051, 067, 085, 097, 098, 118, 117, 161, 172, 177 OSA K I 016, 028, 063, 064, 071, 12.
14 . Appendi x GB9 1 User’ s Manual SAMSU X 019 SANDRA 062 SANSEI 084 SANSUI 085 SAN Y O 005, 017, 028, 038, 041, 106, 107, 108, 124, 129, 172 S B R 018 SCHAU B L OREN Z 099 SCHNEIDER 018, 064, 071 .
14 . Appendi x GB9 2 User’ s Manual TE K NI K A 006, 009, 019, 023, 025, 026, 029, 036, 051, 052, 057 TELEA VIA 171 TELECO 135 TELEFUN K EN 025, 163 TELEMEISTER 098 TELETECH 004 TELETON 017, 057, 06.
14 . Appendi x GB9 3 User’ s Manual 3 . DVD Co de List B rand Code DVD Pla y ers AI W A 146 ALPINE 098 APE X DI G IT AL 087, 111, 115 B RO K SONIC 130 CINEVISION 091 DENON 007, 080, 173 DURA B RAND .
14 . Appendi x GB9 4 User’ s Manual TOSHI B A 164 DVD / VCR Combos G O VIDEO 137 P ANASONIC 150 PHILIPS 105 ( VCR F unc tions for VCR 067) SAMSUN G 137, 159 SANSUI 154 SON Y 145 TOSHI B A 141 Z ENITH 091 ( VCR F unc tions for VCR 101) 4 .
14 . Appendi x GB9 5 User’ s Manual SHER W OOD 024, 102, 106, 246 SON Y 018, 025, 101, 166, 179, 180, 184, 218, 220, 247, 248 SOUNDESI G N 036 SUNFIRE 142, 143, 146 TEAC 005, 019, 049, 111, 212, 217.
20000-00060PT *20000-00060PT* ROHS/MANU AL/HDPVR1000C/200GBSV.
An important point after buying a device Humax HDPVR-1000C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Humax HDPVR-1000C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Humax HDPVR-1000C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Humax HDPVR-1000C you will learn all the available features of the product, as well as information on its operation. The information that you get Humax HDPVR-1000C will certainly help you make a decision on the purchase.
If you already are a holder of Humax HDPVR-1000C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Humax HDPVR-1000C.
However, one of the most important roles played by the user manual is to help in solving problems with Humax HDPVR-1000C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Humax HDPVR-1000C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
