Instruction/ maintenance manual of the product Pool System Huffy
Go to page of 17
1 04/03 P/N 211984A © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211984A 04/03 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 See instruction manual for proper installation and maintenance.
04/03 P/N 211984A 3 200439 1 1/00 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground restraint and check system for stability .
4 P/N 211984A 04/03 For more information on assembly, placement, proper use and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
04/03 P/N 211984A 5 Get to know the basic parts of your basketball system..... STRUTS BACKBOARD FRONT RIM WHEEL CARRIAGE ASSEMBL Y BASE POLE.
6 P/N 211984A 04/03 P ARTS LIST - (See Hardware Identifier) Item Qty . Part No. Description 1 1 206740 T ank (White) 2 1 200628 1 1.75 Long Axle Rod 3 2 226401 Wheel 4 1 900220 T op Pole Section (White) 5 1 201 190 Cap (White) 6 1 986102 Bottom Pole Section (White) 7 1 202822 Eyebolt, 3/8-16 x 3-3/4 Long 8 1 202820 Rod, 3/8 O.
04/03 P/N 211984A 7 HARDW ARE IDENTIFIER (BOL TS & STEEL RODS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC CLIPS & SP ACERS) Item #14 (1) Item #12 (6) Item #10 (1).
8 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE 9/16” and 1/2” 9/16” and 1/2” AND/OR This is what your system.
04/03 P/N 211984A 9 1. 1 Remove contents from t ank 4 6 TOP BOTTOM 5” (13 cm) 2. Correctly identify each pole section and mark indicated distance from ends with t ape as shown. TAPE (Not Supplied) 3. WOOD SCRAP IMPORT ANT! Center the alignment slot of bottom pole section (6) in the lower hole of top pole section (4) as shown.
10 P/N 211984A 04/03 2. Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 7 8 6 8 7 4 6 10 6 8 7 3. 2 29 29 3 3 9 Install wheel axle (2) through wheel carriage (9). Inst all wheels (3) onto wheel axle (2) with spacers (29) as shown.
04/03 P/N 211984A 11 11 13 1 14 13 12 12 4. Secure tank strut s (13) to pole. Rotate non-secured ends of t ank struts (13) outward to mounting holes in tank as shown. 5. 13 13 1 Secure non-secured ends of tank strut s (13) to t ank as shown. Repeat for opposite side.
12 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION SECTION B: ASSEMBLE THE BACKBOARD 1/2” 1/2” OR This is what your system will look like when you’ve finished th.
04/03 P/N 211984A 13 21 22 22 18 20 17 17 Mount brackets (20) and rim (18) to backboard and finger tighten as shown. NOTE: Final adjustments will be made in S tep 9. IMPORT ANT! For spring loaded rim assembly , refer to instructions included with rim hardware.
14 P/N 211984A 04/03 8. Install clip s. CLI P “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
04/03 P/N 211984A 15 Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snap s into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INST ALLA TION 9.
16 P/N 211984A 04/03 1. 28 26 27 26 Place assembled unit to desired location. Fill tank with water (30 gallons (1 14 liters)) or sand (360 lb. (163 kg)) and snap tank cap (28) in place.
04/03 P/N 211984A 17 1. SECTION E: APPL Y HEIGHT AND MOVING LABEL Apply Height and Moving label on pole as shown. 15 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location.
An important point after buying a device Huffy Pool System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy Pool System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy Pool System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy Pool System you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy Pool System will certainly help you make a decision on the purchase.
If you already are a holder of Huffy Pool System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy Pool System.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy Pool System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy Pool System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
