Instruction/ maintenance manual of the product 89226 Huffy
Go to page of 13
1 P/N 211554 02 09/04 IMPORT ANT! T o ensure prompt and correct handling of any problems, or to answer any questions, please cont act the Sample and Display T echnician at 1-800-558-5234. READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.
P/N 211554 02 09/04 2 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside. NOTICE T O ASSEMBLERS ALL Huffy Sport s Basketball Systems, including those used for DISPLA YS, MUST be assembled and ballasted with sand or water according to the instructions.
3 P/N 211554 02 09/04 P AR TS LIST (See Hardware Identifier) Item #17 (2) HARDW ARE IDENTIFIER (NUTS, W ASHERS & SPRINGS) Item #9 (12) Item #1 1 (12) Item Qty.
P/N 211554 02 09/04 4 Install display boards in the marked locations. Each mounting location consist s of a mounting pole stub with the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is facing).
5 P/N 211554 02 09/04 At corner location 3 slide the pole sleeve (34) inside the mounting stub. 1a. 1b. Slide the 3" diameter end of the display pole (24) inside the pole sleeve. Secure the display pole by sliding the display wedge (27) into position as shown.
P/N 211554 02 09/04 6 1 . 2 . Corner Location 1: STEEL FRAME ACR YLIC BACKBOARD ASSEMBL Y 32 7 23 Insert “T” bolt (18) through Slam Jam bracket (23) as shown. Secure Slam Jam bracket (23), extension arm (31) and mounting spacers (4) assemblies to backboard using bolt (7 ) and nut (1 1) as shown.
7 P/N 211554 02 09/04 1 17 15 16 25 23 18 • Fit rim (25) securely into bracket (23) as shown. • Install reinforcement bracket (1) onto “T” bolt (18) as shown. • Install spring (16) onto “T” bolt (18) as shown. • Install special nut (17) and washer (15) onto “T” bolt (18).
P/N 211554 02 09/04 8 Corner Location 2: 48” F AN MOLDED PLASTIC BOARD ASSEMBL Y 1. Insert “T” bolt (18) through Slam Jam bracket (23) as shown. Secure Slam Jam bracket (23) and extension arm (31) to backboard using bolt (7) and nut (1 1) as shown.
9 P/N 211554 02 09/04 3. • Fit rim (25) securely into bracket (23) as shown. • Install reinforcement bracket (1) onto “T” bolt (18) as shown. • Install spring (16) onto “T” bolt (18) as shown. • Install special nut (17) and washer (15) onto “T” bolt (18).
P/N 211554 02 09/04 10 Corner Location 3: 44" F AN MOLDED PLASTIC BOARD ASSEMBL Y Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to press completely into place. Attach rim (25) to backboard and pole bracket (26) with knob (6), reinforcement bracket (1), and carriage bolt (10) as shown.
11 P/N 211554 02 09/04 Corner Location 4: 44" F AN MOLDED PLASTIC BOARD ASSEMBL Y 1. Attach rim (25) to backboard (30) and extension arm (31) with bolts (7), washers (14) and nuts (1 1). T ighten completely . 30 11 7 31 25 30 9 13 2 . Attach board assembly to pole.
P/N 211554 02 09/04 12 Install net clip s. CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
13 P/N 211554 02 09/04 Install net. Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snaps into position. Net must be centered through clip.
An important point after buying a device Huffy 89226 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy 89226 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy 89226 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy 89226 you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy 89226 will certainly help you make a decision on the purchase.
If you already are a holder of Huffy 89226, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy 89226.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy 89226. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy 89226 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
