Instruction/ maintenance manual of the product DL165 HP
Go to page of 38
Hot Plug SAS/SATA or Non-Hot Plug SATA Models Front View: Rear View: 1. Access panel 1. Power supply 2. System fans 2. Optional SD Card Reader 3. Front-panel USB 2.0 ports 3. Unit Identification LED (UID) 4. Power switch/system status LEDs 4. Two USB ports 5.
Internal storage capacity: SATA Capacity: Support for up to 8.0TB (4 x 2TB) with Hot Plug Model. 8.0TB (4 x 2TB) with Non Hot Plug Model SAS Capacity: Support for up to 8.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model AMD Opteron™ Processor Model 6128 (2.
Network Controller (2) HP NC362i Integrated Dual Port Gigabit Server Adapter Expansion Slots # Technology Bus Width ** Connector Width Bus Number * Device No. ** Form Factor Notes 1 PCI-Express 2.0 x16 x16 5 0 Full Height/Full Length 3.3 volts 2 *** PCI-Express 2.
Storage Diskette Drives Via USB only Optical Drives Optional SATA 9.5mm DVD-ROM Optical Drive Optional SATA 9.5mm DVD RW Optical Drive Hard Drives Up to 4 Non-hot plug SATA 3.5" drives Up to 4 Hot plug SAS/SATA 3.5" drives Up to 8 Hot plug SAS/SATA 2.
Embedded Manageability HP LO100 Advanced HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. Standard Features: Embedded IPMI standard reporting System event log access Remote Serial console (serial redirection) Browser, Telnet access SMASH-CLP compliant IPMI 2.
information about this service, please visit: http://www.hp.com/services/insight . Industry Standard Compliance ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support Microsoft® Logo certifications IPMI 2.
System Fans 4 non-hot plug system fans ship standard with 1P models, optional upgrade to N+1 redundant. 7 non-hot plug system fans ship standard with 2P models, N+1 Redundant Standard Operating System.
Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL165 G7 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters.
Cold Plug/Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models HP DL165G7 6172 Hot Plug SAS/SATA 590261-xx1 Processor(s) AMD Opteron™ Processor Model 6172 (2.
Country Code Key xx=00 U.S. xx=29 Japan xx=37 APD xx=42 Euro xx=AA PRC QuickSpecs HP ProLiant DL165 Generation 7 Models DA - 13602 Worldwide QuickSpecs — Version 2 — 4.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processors NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21. AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W) FIO Kit 601111-L21 AMD Opteron™ Processor Model 6128HE (2.
HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
HP Power Supplies CAUTION: Many HP ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration.
NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information. HP Processors AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W) Kit 601111-B21 AMD Opteron™ Processor Model 6128HE (2.
HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive 462595-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive 458941-B21 HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive 458939-B21 SATA Hot Plug LFF (3.
HP Networking Gigabit Ethernet Adapters HP NC112T PCIe Gigabit Server Adapter 503746-B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21 HP NC375T PCI Express Quad Port Gigabit Serve.
HP Entry-Level Server Management HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at: www.
Smart Array Advanced Pack license (P/N 516471-B21). Smart Array P212 Controller HP Smart Array P212/Zero Memory Controller 462828-B21 HP Smart Array P212/256MB Controller 462834-B21 Smart Array P410 C.
HP InfiniBand Options HP IB 4X DDR PCI-e DUAL PORT HCA 448397-B21 HP IB 4X QDR Conn-X PCI-e G2 Dual Port HCA 516937-B21 NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html HP Backup & Recovery Software Data Protector Express HP Data Protector Express 4.
HP Disk Backup NOTE: For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP StorageWorks disk backup products see: http://www.
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers. StorageWorks Converged Network Adapter HP CN1000E 2P Converged Network Adapter AW520A HP Uninterruptible Power Systems HP Rack-mountable UPS HP R1500 G2 UPS HP, R1.
HP Rack Options Keyboards and Monitors HP KVM Switch Options Server console switch 0x2x8 AF616A Server console switch 0x2x16 AF617A HP 1x4 Console Switch 0x2x16 KVM Server Console G2 Switch with Virtu.
HP ProLiant DL165 G7 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 4 GB (2 x 2 GB) PC2-6400 DIMM memory, with Advanced ECC Capabilities memory installed. Maximum Memory Up to 246GB memory is available with the optional installation of PC2-8500R-7 Registered DIMM memory kits.
DIMM Type Registered DIMMS (RDIMMs) Unbuffered with ECC DIMMs (UDIMMs) DIMM Rank Single Rank Dual Rank (2R) Quad Rank (4R) Dual Rank (2R) DIMM Capacity 4GB 2GB 8GB 16GB 2GB 4GB DIMM Native Speed (MHz).
Following are memory options available from HP: HP Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx4 PC3-10600R-9 Kit 593907-B21 HP 4GB 1Rx4 PC3-10600R-9 Kit 593911-B21 HP 4GB 1Rx4 PC3L-10600R-9 Kit 604500.
1-4 Hot plug 3.5" SATA or Hot-plug SAS/SATA hard drive bays A Optional DVD-ROM, or DVD/CD RW 1-8 Eight Hot-plug SAS hard drive bays A Optional DVD-ROM, or DVD RW Drive Support Removable Media Qua.
60GB 3.0G SATA SSD 120GB 3.0G SATA SSD Up to 8 1-8 HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller SATA Hot Plug 3.5" Midline (MDL) Solid State Drives Quantity Supported Position Supported Controller 60GB 3.
Tape and Disk Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape . For the complete range of StorageWorks D2D Backup Systems see: http://www.
Tape Autoloaders and Libraries, External 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 Please check the full compatibility information at: http://www.hp.com/go/connect HP StorageWorks Fibre Channel Tape Libraries, External MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.
HP 500W Power Supply Part Number - AC 500W PSU 515915-B21 FIO Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 47/63 Nominal Input Voltage (Vrms) 100 120 200 220 230 240 Maximum Rated Output Wattage 500 500 500 500 500 500 Nominal Input Current (A rms) 5.
Power ProLiant DL165 G7 Fully Configured 115V/60Hz 220V/50Hz Fully Loaded System Input Wattage (W) 568 556 Fully Loaded System Input Current (A rms) 4.
System Unit Dimensions (H x W x D) (with bezel) 1.70 x 17.64 x 27.59 in (4.32 x 44.80 x 69.95 cm) Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 32.08 lb (14.55 kg) Minimum (one hard drive, power supply, and processor installed) 27.
System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr).
HP B110i Smart Array Controller Drives Supported Up to 4 SATA devices Channels 4 1.5Gb SATA Storage Capacity 3.0TB internal storage Data Transfer Method 32-bit/33-MHz PCI bus-master Maximum SATA Channel Transfer Rate 1.
(2x) NC362i Integrated Dual Port Gigabit Server Adapter Network Interface Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
An important point after buying a device HP DL165 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP DL165 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP DL165 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP DL165 you will learn all the available features of the product, as well as information on its operation. The information that you get HP DL165 will certainly help you make a decision on the purchase.
If you already are a holder of HP DL165, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP DL165.
However, one of the most important roles played by the user manual is to help in solving problems with HP DL165. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP DL165 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
