Instruction/ maintenance manual of the product 1706 HP
Go to page of 60
User G uid e 15 06 , 17 06 and19 06 L CD Monitor s Doc ument P ar t Number : 3 8 9 5 21-00 2 October 2005 This guide provides information on setting up the monitor , installing dri vers, using the on-screen display menu, troubleshooting and technical specif ications.
© 2005 He wlett-Packard De velopment Company , L.P . HP , He wlett Packard, and the He wlett-Packard logo are trademarks of He wlett-Packard Company in the U.S. and other countries. Compaq and the Compaq logo are trademarks of He wlett-Packard De velopment Company , L.
Cont ent s 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor . . .
Con te nt s Optimizing Digital Conversion . . . . . . . . . . . . . . . . . 4–9 Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . 4–10 Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10 HP Display LiteSaver (Available with Select Models) .
Cont ent s Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . C–5 Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5 Japanese Power Cord Requirements .
Con te nt s User Gu ide vi.
1 Product Features The flat panel display has an acti ve matrix, thin-f ilm transistor (TFT), liquid crystal display (LCD). The monitor features include: 15 0 6 M o d e l ■ � 15-inch (38.1 cm) vie wable area display . ■ � 1024 x 768 resolution, plus fu ll-screen support for lo wer resolutions.
Pr oduct F eature s ■ Compliant with the follo wing regulated specif ications: ❏ � EP A ENERGY ST AR ❏ � European Union CE Directi ves ❏ � Swedish MPR II 1990 ❏ � Swedish TCO 1 7 06 Model ■ � 17-inch (43.18 cm) vie wable area display .
Pr oduct F eatur es ❏ � European Union CE Directi ves ❏ � Swedish MPR II 1990 ❏ � Swedish TCO 19 0 6 M o d e l ■ � 19-inch (48.3 cm) vie wable area display . ■ � 1280 x 1024 nati ve resolution, plus full-screen support for lo wer resolutions.
Pr oduct F eature s ■ Compliant with the follo wing regulated specif ications: ❏ EP A ENERGY ST AR ❏ European Union CE Directi ves ❏ Swedish MPR II 1990 ❏ Swedish TCO 1–4 User Guid e.
2 Safet y an d M ainten an ce Gu id el i ne s Impor tan t Sa fety Informa tion A po wer cord is included with your monitor . If another cord is used, use only a po wer source and connection appropriate for this monitor .
Safe t y and Maintenance Guidelines Ä CAUT I ON: F or the pro tection o f your mo nitor , as w ell as your compute r , connect all po wer cor ds f or your co mputer and its per ipheral de vi ces (suc.
Safe t y and Maintenance Guidelines ■ � Slots and openings in the cabinet are provided for v entilation. These openings must not be blocked or co vered. Ne ver push objects of any kind into cabinet slots or other openings. ■ � Do not drop your monitor or place it on an unstable surface.
Safe t y and Maintenance Guidelines 2–4 User Guid e.
3 Set tin g U p t h e Monitor T o set up the monitor , ensure that the po wer is turned off to the monitor , computer system, and other attached de vices, then follo w the steps below . Installin g t h e Monitor P edes tal T o install the monitor pedestal: 1.
Setting Up the Monito r 2. Using both hands, position the monitor ov er the pedestal base and press do wn firmly to lock the pedestal base in place. When the base locks, it will make a clicking sound. Mak e sure the pedestal base is securely locked before continuing with the setup.
Setting Up the Monitor Conn ec tin g t he Monitor 1. Place the monitor in a con venient, well-ventilated location near your computer . 2. Connect the monitor signal cable on the back of the monitor to the video connector on the rear panel of the computer .
Setting Up the Monito r 3. Connect one end of the power cable to the back of the monitor , and the other end to an electrical wall outlet. Connec ting the Signal and P ow er C ables 3–4 User Guid e.
Setting Up the Monitor 4. Adjust the monitor as needed for your comfort using the monitor’ s tilt adjustment capability . T ilting the Monitor 5. Press the power switch to turn on the monitor . Ä CAUT I ON: Burn-in image damage may occ ur on monitors that displa y the same static image on sc reen f or a pr olonged peri od of time .
Setting Up the Monito r Rem o vi n g t h e M o ni to r B a s e Y ou can remov e the monitor base to mount the monitor on a wall, a swing arm, or other mounting f ixture.
Setting Up the Monitor 3. Remo ve the three scre ws 2 as shown in the follo wing illustration. R emov ing the Monitor Base Ä CAUT I ON: Ensur e that the bottom of the monit or base is positi oned o ver a ta ble or desktop befo re r emo ving the bas e fro m the monitor .
Setting Up the Monito r Ä CAUT I ON: This monitor su pports the VES A indu str y standar d 100mm mounting hole s. T o attac h a third party mounting solution to the monitor , four 4mm , 0.7 pitc h, and 10mm long s cr ew s are r equired (no t pro vi ded with the monito r) .
4 O peratin g t he Monitor Soft w are an d Utiliti es The monitor includes a CD that contains two f iles you can install on your computer: ■ an .INF (Information) f ile ■ an .ICM (Image Color Matching) f ile Adobe Reader is supplied on this CD and can be installed from the menu.
Oper ating the Monitor The Ima ge C ol or Ma tc hin g File The .ICM f iles are data files that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer , or from scanner to monitor screen. The .
Oper ating the Monitor Do wnloading from the W orl dwide W e b T o download the latest v ersion of .INF and .ICM f iles from the HP monitors support W eb site: 1. Refer to ht tp://ww w .hp.com/su ppor t and select your country region. 2. Follo w the links for your mon itor to the support page and do wnload page.
Oper ating the Monitor F ro nt P anel Contr ols ‘ Control Func tion 1 Menu Opens , selects or e x its the OSD menu . 2 – ( Minu s button) • Nav igates bac kwar d thr ough the OSD me nu and decr ease s adjustmen t lev els. • If the OSD men u is inacti ve , acti vates the a uto adju stment featur e to optimi z e the sc reen image .
Oper ating the Monitor Adjus ting Monitor Set ting s Use the On-Screen Display (OSD) to adjust the screen image based on your vie wing preferences. T o access the OSD, do the follo wing: 1. If the monitor is not already on, press the Po wer switch to turn on the monitor .
Oper ating the Monitor 6. After adjusting the function, select Sav e and Return, or Cancel if you don’ t want to sav e the setting, then select Exit from the Main Menu.
Oper ating the Monitor The Adv anced OSD Menu has up to three sublev els and can be vie wed in one of six av ailable languages. The follo wing table provides the menus and their functions at each le v.
Oper ating the Monitor Adv anced OSD Men u Le v e ls (Contin u ed) Le v el 1 Le v el 2 Le v el 3 Fa c t o r y Preset Mode Displa y On / Off Selecti on N P ow er - On Status On / Off Selecti on N Displ.
Oper ating the Monitor For more precise adjustments, run the Adjustment P attern provided on the CD and use the Clock and Clock Phase controls (accessible from the OSD menu) as described in the follo wing section.
Oper ating the Monitor Id entif ying Monitor C onditions Special messages will appear on the monitor screen when identifying the follo wing monitor conditions: ■ � Input Signal Out of Range— Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports.
Oper ating the Monitor ■ Set On T ime ■ T imer: On/Of f ■ Sleep No w T o set the timer: 1. Press the Menu button on the monitor front panel to display the Adv anced Menu. 2. Scroll do wn and highlight Management. 3. Press the Menu button to select Management.
Oper ating the Monitor 13. Set the T imer mode to On to activ ate the Sleep T imer settings. 14. When you are finished, select Sa ve and Return to e xit the menu. The f ifth selection, Sleep Now , turns the monitor backlights off immediately and stays in sleep mode until the next On T ime acti vates or a monitor b utton is pressed.
Oper ating the Monitor 4. Select the follo wing options to configure the HP Display LiteSa ver features: Confi gure Options Func tion Enable Displa y Lit eSa ver Enables the HP Dis play L iteS ave r func tions; deselec t to disable the HP Displa y Lite Sav er .
Oper ating the Monitor Confi gure Options Func tion OK St ores the c urr ent settings and minimi z es HP Displa y Lite Sa ver to the S ys tem T r ay . Cancel R estor es the pr ev iou s settings and minimi z es HP Displa y Lite Sa ver to the S ys tem T r ay .
Oper ating the Monitor C han gin g t he C ol or T em pera ture 1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. 2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color T emperature menu.
Oper ating the Monitor 5. T o acti v ate a color profile for your monitor , you must set it as the Default Monitor Prof ile. Select “sRGB Color Space Prof ile, ” then click Set as Default button.
A Tr o u b l e s h o o t i n g Solving Comm on Problems The follo wing table lists possible problems, the possible cause of each problem, and the recommended solutions. Pr oblem P o ssible Caus e Solut ion Scr een is blank. P ow er cord is disconnec ted.
T r oublesho oting Pr oblem P o ssible Caus e Solut ion Image appears blurr ed, indis tinct , or too dark . Br ightness and contr ast ar e too low . Pr ess the Auto A djust bu t ton on the fr ont panel .
T r oubleshoot ing Pr oblem “Out of R ange . Set Monitor to 1280 x 10 2 4 @ 6 0Hz ” is disp layed on screen . P o ssible Caus e V ideo re solutio n and/or r efr esh rat e are set higher than w hat yo ur monitor su ppor ts. Solut ion R estart your com puter and ente r Safe Mode .
T r oublesho oting Pr oblem P o ssible Caus e Solut ion The HP Dis play L iteSa ver may no t be compatible w ith your co mputer sys te m . Some notebook computers ar e not compatible and the monitor po w er can not be contr olled. Co nfirm that the HP Displa y L iteS aver is co mpatible with you r syst e m.
T r oubleshoot ing Preparing to call T ec hni cal Sup por t If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
T r oublesho oting A–6 User Guid e.
B T ec hnical S pec ifica tions ✎ All performance specif ications are provided by the component manufacturers. Performance specif ications represent the highest specif ication of all HP’ s component manufacturers’ typical le v el specif ications for performance and actual performance may vary either higher or lo wer .
T ec hnical Spec if ications 1 506 F l at P an el Monitor (Contin ued) V er tical R efr esh R ate 5 0 to 7 6 Hz En vir onmental Re quirements T empe ratur e: Operating T emperatur e 41 to 9 5 o F 5 to.
T ec hnical Spec ifi cations 1 7 06 Fl at P an el Monitor Displa y 17 . 0 inches 4 3 .18 cm Ty p e TFT L CD V iew able Image Si z e 17 . 0 -inch di agonal 4 3 .18 cm Til t - -5 t o 30 o Max i mum W ei g ht 10.1 lbs . 4.60 k g (unpac ked) (Unpac ke d) Dimensi ons (include pedes tal) He ight 15 .
T ec hnical Spec if ications 1 7 06 Fl at P an el Monitor (Co ntinued) P ow er Co nsumption <3 7 watts typi cal Input T erminal 15-pin D-t ype co nnector w ith cable included .
T ec hnical Spec ifi cations 1 906 F l at P an el Monitor Displa y 19 . 0 inches 48.3 c m Ty p e TFT L CD V iew able Image Si z e 19 . 0 -inch diago nal 4 8.3 cm Til t - -5 t o 30 o Max i mum W ei g ht 11.7 lbs . 5 .3 0 kg (un pack ed) (Unpac ke d) Dimensi ons (includes pede stal) He ight 16 .
1 2 3 4 5 6 7 8 9 10 11 12 T ec hnical Spec if ications 1 9 06 Fl at P an el Monitor (Contin ued) P ow er Co nsumption <3 7 watts Input T erminals 15-pin D-t ype connec tor w ith cable included . Recognizing Preset Disp l a y Resolutions The display resolutions listed belo w are the most commonly used modes and are set as factory def aults.
T ec hnical Spec ifi cations Factor y Preset Dis pl ay Modes (C ontinued) Preset Pi xel F ormat Horz Freq (kHz) V ert Freq (Hz) 13 115 2 x 900 71.7 7 6.
T ec hnical Spec if ications blanked, the backlight is turned of f, and the Po wer light is turned amber . When the monitor is in the reduced power state, the monitor will utilize less than 2 watts of po wer . There is a brief warm up period before the monitor will return to its normal operating mode.
C Ag ency Regula tor y N otices F ed eral C ommuni ca tions Com miss ion No tice This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agenc y Regulatory Notices Modifica tions The FCC requires the user to be notif ied that any changes or modif ications made to this device that are not e xpressly approv ed by He wlett P ackard Company may v oid the user's authority to operate the equipment.
Agency R egulator y Notices T o identify this product, refer to the Part, Series, or Model number found on the product. Ma teri als dis posal This HP product contains the follo wing materials that might require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD.
Agenc y Regulatory Notices Compliance with these directi ves implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by He wlett-Packard for this product or product family .
Agency R egulator y Notices Japa nese No tic e Ko r e a n N o t i c e ENERG Y S T AR Com p li ance Monitors that are marked with the ENERGY ST AR Logo meet the requirements of the U.
Agenc y Regulatory Notices The po wer cord set (flexible cord or wall plug) recei v ed with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a po wer cord for a different country , you should purchase a po wer cord that is approv ed for use in that country .
D L CD Monitor Q ualit y and P ix el P oli cy The TFT monitor uses high-precision technology , manufactured according to HP standards, to guarantee trouble-free performance. Ne vertheless, the display may ha ve cosmetic imperfections that appear as small bright or dark spots.
L CD Monito r Qualit y and P ix el P olic y T o locate defecti ve pixels, the monitor should be vie wed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 in.
An important point after buying a device HP 1706 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP 1706 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP 1706 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP 1706 you will learn all the available features of the product, as well as information on its operation. The information that you get HP 1706 will certainly help you make a decision on the purchase.
If you already are a holder of HP 1706, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP 1706.
However, one of the most important roles played by the user manual is to help in solving problems with HP 1706. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP 1706 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
