Instruction/ maintenance manual of the product ZR2440W HP (Hewlett-Packard)
Go to page of 42
HP ZR2040w, ZR2240w, ZR2440w and ZR2740w LCD Monitors User Guide.
© 2011, 2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademar ks of Microsoft Corporation in the U nited States and/or other countries.
About This Guide This guide provides information on set ting up the monitor and technical specific ations. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of life .
iv About Thi s Guide.
Table of contents 1 Produc t Feature s ............ ............ .............. ........... ............... ............ ............... ........... ..... ............ ........... .......... 1 ZR2040 w Model .. ............. .......... .............. .
ZR2240 w Model .. ............. .......... .............. ........... .......... .............. ........... ............. ........... .... ................ 30 ZR2440 w Model .. ............. .......... .............. ........... .......... ...........
1 Product Features The LCD (liquid crystal display) mo nitors have an active matrix of thin-film transistors (TFT). All models have the follow ing features: ● Mercury-free LED backlight ● Wide vie.
ZR2240w Model Features of the ZR22 40w model include: ● 54.72 cm (21.5-inch) diagon al viewable area disp lay with 1920 × 1080 resolution, p lus full- screen support for lower resolutions ● Video.
● 8-way comfort adjust including Hei gh t, Tilt, Pivot and Swivel adjustments ● HP Quick Release 2 is now a flush mount solution that lets you q uickly in stall the panel with a simple click and r.
ZR2740w Model Features of the ZR27 40w model include: ● 68.74 cm (27-inch) diagona l viewable area display with 2560 x 1440 resolution ● Video signal input to suppo rt DVI digital with DVI-Dual Link signal ca ble provided ● Video signal input to suppo rt DisplayPort digital with DisplayPort signal cable provided ● USB 2.
2 Setting Up the Monitor To set up the monitor, en sure that the power is turned off to the monitor, computer system, and othe r attached devices, then follow the instructions below. NOTE: Be sure the master po wer switch, located on th e rear pa nel of the monitor, is in the off position.
Models ZR2240w, ZR2440w, and Z R2740w use the HP Quick Release 2 mechanism for easy moving of the monitor. To mount the panel onto the pedestal: 1. Slide the mounting plate on the pedestal under the upper lip o f the recess in th e back of the panel. 2.
ZR2240w Model Figure 2 -4 ZR2240w Rear Components 2 2 1 2 3 2 4 2 5 2 6 2 7 8 9 11 11 10 10 Component Funct ion 1 Cable Lock Provision Provides slot fo r use with cable security locks.
Component Funct ion 10 Information Card Provides information needed for a support call. 11 USB Downstream Connectors (side panel) Connects optional USB devices to the mon itor. ZR2440w Model Figure 2 -5 ZR2440w Rear Components Component Funct ion 1 Cable Lock Provision Provides slot fo r use with cable security locks.
Component Funct ion 5 Analog Audio Output Connects an audio ca ble with 3.5 mm L/R mini-plug to the monitor. 6 DisplayPort Connector Connects the DisplayPort cable to the monitor. 7 HDMI Connector Connects an HDMI cable to the monitor. 8 DVI-D Connector Connects the DVI-D cable to the monitor.
ZR2740w Model Figure 2 -6 ZR2740w Rear Components Component Funct ion 1 Cable Lock Provision Provides slot fo r use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. NOTE: Putting the switch in the Off position will yield the lowest power state for the monitor when not in use.
Routing and Connecting the Cables Place the monitor in a co nvenient, well-ventilated loca tion near the computer . ZR2040w Model The cable-re straining bar on the ped estal of t he ZR2040w is held in place by four tabs. Figure 2 -7 Cable-Restraining Bar 1.
4. Connect the AC po wer cord and plug it into the wa ll outlet. WARNING ! To reduce the ri sk of electric sh ock or damage to the equ ipment: Do not disable the power cord groundin g plug. The gro unding plug is an imp ortant safety feature. Plug the power cord into a g rounded (earthed) elec trical outlet th at is easily accessible at all times.
ZR2240w, ZR2440w, and ZR2740w Models 1. Remove the cable routing cove r by pulling it straight o ff the front of the column. Figure 2-9 Cable Routing Cover 2. Before connecting th e cables, route them through the cable routing h ole in the column (1) and replace the cable rout ing cover (2).
3. Connect the desired signal sources. Refer to the drawings in ( Rear Compone nts on page 6 ) to identify the conne ctors on your monitor. For eac h one, plug in one end of th e appropriate cable. Attach the other end to your co mputer or other video source.
CAUTION: The HP Quick Release 2 can be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 10.9 kg (24 l bs).
Mounting a Quick-Release Panel The ZR2240w, ZR244 0w and ZR2740w support mounting to VESA-compliant hardware in two ways: ● Remove the HP stand and use the 4 VESA mount th readed holes (100 x 10 0 pattern) that are in the Quick Release 2 recess. Screws of the appropri ate length are provided.
3. Slide the pedestal out of the recess. 4. Remove four screws holding the mo untin g plate to the head of the p edestal: Figure 2-15 Removing the Mounting Plate from th e Pedestal 5.
6. Attach the mounting p late to the wa ll or swing arm o f your choice. Figure 2-17 Installing the Mounting Plate CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mo unting solution to the mo nitor, four 4 mm, 0.
Identifying informat ion is located on the p ull-out card (instead of on labels on the back of the monito r). Warranty support information (model number, serial number, product n umber) is printed on the fro nt of the card an d regulatory informatio n is printed on the ba ck of the card.
Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 2-20 Adjusting the Tilt 2. If your monitor has th e ability to swivel, adj ust it to the left or right fo r the bes t viewing angle.
monitor is lifted. If the displ ay head is locked in the lowest position, release and adjust it as follows: Figure 2-22 Adjusti ng the Height (Select Models) a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the display head (1 ).
Portrait Orientation The ZR2040w m ust be mounted in th e orientation you wish to use. O ther models can be pivoted a fter mounting. To do this, raise the panel to its highes t position and pivot it clockwise from landscape to portrait.
3 Operating the Monitor Overview of Operation If you are not familiar with HP Performance monitors , read this section for an o verview of how they operate. This will help you locate specific info rmation elsewher e in this manual. Your monitor provides for m ore than one source of input.
through the OSD. Pressing th e + button on the front of the monitor will take you directly to the OSD source-control su bmenu. Figure 3 -1 ZR2040w and ZR2240w F ront Panel Controls Control Functi on 1 Menu Opens, selects or exits the OSD menu.
ZR2440w Model The default input o n the ZR2440w is DisplayPort an d the scan order is ini tia lly set to DisplayPort, DVI-D, HDMI. You can change the curren t input, the de fault and the scan order thro ugh the OSD. Pressing the + button on the front of the monitor will ta ke you directly to the OSD source-control submenu.
ZR2740w Model For the ZR2740w model, the d efault input is DisplayPort. You can cha nge the current input by pressing the SOUR CE button on the fro nt of the pan el.
Pressing the Power bu tton, , puts the monitor in low power mo de. (To t urn powe r off completely, use the switch on the rear of th e panel.) The mo ni tor also enters low-po wer mode when there is no video signal input. When the moni tor is first powered on, the LED turns blue and remains blue for a bout half a minute.
4 Locating Additional Information Refer to the HP LCD Monitors Reference Guide included on the CD with your mo nitor for additional information on: ● Optimizing monitor performance ● Safety and ma.
A Technical Specifications NOTE: All performan ce specificatio ns are provided by the component manufa cturers. Performan ce specifications represent the h ighes t specification of all HP's compo nent manufacturers' typical level specifications for performance and actual perform ance may vary either higher o r lower.
Power Consumptio n (maximum) Low-power mode 33 watt s 0.3 wat ts Input Terminal One DVI connector with cab le included; one DisplayPort connector with cable included; one VGA connector with cable ZR2240w Model Table A -1 ZR2240w Specificati ons Display Type 54.
Table A -1 ZR2240w Specificati ons (continued) Altitude: Operating Storage 0 to 5000 m 0 to 12,192 m 0 to 16,400 feet 0 to 40,000 feet Power Consumptio n (maximum) Low-power mode 46 watts 0.
Power Source 100 – 240 VAC, 50/60 Hz Altitude: Operating Storage 0 to 5000 m 0 to 12,192 m 0 to 16,400 feet 0 to 40,000 feet Power Consumptio n (maximum) Low-power mode 51 watt s 0.5 wat ts Input Terminal One DVI connector with cab le included; one DisplayPort connector with cable included; one HDMI connector ZR2740w Model Display Type 68.
Altitude: Operating Storage 0 to 5000 m 0 to 12,192 m 0 to 16,400 feet 0 to 40,000 feet Power Consumptio n (maximum) Low-power mode 120 watts 2 watts Input Terminal One DVI connector with cab le inclu.
1 640 x 480 31.469 59.940 2 720 x 400 31.469 70.087 3 800 x 600 37.879 60.317 4 1024 x 768 48.363 60.004 5 1280 x 720 45.00 59.94 6 1280 x 960 60.0 60.0 7 1280 x 1024 63.981 60.020 8 1440 x 900 55.935 59.887 9 1600 x 900 60.0 60.0 10 1680 x 1050 65.290 59.
7 1280 x 720 45.00 59.94 8 1280 x 768 47.396 59.995 9 1280 x 800 49.702 59.810 10 1280 x 960 60.00 60.00 11 1280 x 1024 63.981 60.020 12 1366 x 768 47.712 59.790 13 1440 x 900 55.935 59.887 14 1440 x 900 55.469 59.901 15 1600 x 900 60.000 60.00 16 1600 x 1000 61.
Table A -4 ZR2440w High Definition Video Formats (con tinued) 13 1080p25 1920 x 1080 28.125 25 74.250 3 3 1080p-25Hz 14 1080p29.97 1920 x 1080 33.750 30 74.250 34 1080p-30Hz ZR2740w Model Preset Modes Preset Pixel Format Horizontal Frequency (kHz) Vertical Frequency (Hz) 1 640 x 480 31.
An important point after buying a device HP (Hewlett-Packard) ZR2440W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) ZR2440W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) ZR2440W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) ZR2440W you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) ZR2440W will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) ZR2440W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) ZR2440W.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) ZR2440W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) ZR2440W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
