Instruction/ maintenance manual of the product W19 HP (Hewlett-Packard)
Go to page of 22
HP w19 LCD Monitor User's Guide • Preface • Safety and Maintenance Guidelines • Setup • Using the Monitor • Drivers and Auto-Adjustment • T echnical Suppor t F AQ • Specifications .
Back to Contents Page Preface: HP w19 LCD Monitor About This Guide • Notational Conventions About This Guide This guide is intended for anyone who us es the HP w19 LC D Monitor.
Back to Contents Page Safety and Maintenance Guidelines: HP w19 LCD Monitor Important Safety Information • Safety Precautions • Maintenance Guidelines • Cleaning the M onitor Important Safety Information The power cord is designed for use with your monitor.
Maintenance Guidelines To enhance the performance and exte nd the life of your monitor: • Do not open your monitor cabinet or attempt to ser vice this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer , reseller , or ser vice provider .
Back to Contents Page Setup: HP w19 LCD Monitor • Base • Attaching the Cables • Attaching W all Mounting Arm Back to Contents Page Base: HP w19 LCD Monitor Base • Attaching the Base • Removi.
Attaching the Base 1 T ur n off the monitor and unplug it from the electrical outlet. 2 Place the base on a flat work sur face. 3 Align the tabs on the base with the correspon ding slots on the bottom of the monitor . NOTE: • The base will align with the monitor slots in only one p osition.
Removing the Base 1 Place the monitor upside-down on a stable, flat work surf ace. 2 Push release latch on the bottom of the rear cabinet, and push the base toward the back of the monitor at the same time and lift up to remove the base. NOTE: • The color of the cabinet may var y .
Back to Contents Page Attaching the Cables: HP w19 LCD Monitor Cable Connections On Back of Monitor and Computer Turn off your computer before performin g the procedure below. 1 Connect the power adapter DC cable to the DC-In port on the back of the monitor .
Back to Contents Page Attaching W all Mounting Arm: HP w19 LCD Monitor Preparing to Install An Optional Wall Mounting Arm (Not supplied) • Installing an Optional Wall Mounting Arm (Not supplied) Preparing to Install An Optional W all Mounting Arm (Not supplied) This monitor can be attached to a wall mounting arm yo u purchase se parately.
Installing an Optional W all Mounting Arm (Not supplied) Follow these steps to finish installing a wall mounting arm (not included): 1 Set the monitor screen down on a flat, soft, protected sur face. 2 Place the wall mounting arm onto the back of the monitor .
Back to Contents Page Using the Monitor: HP w19 LCD Monitor • Setting the Optimal Resolution • Controls and Indicators Back to Contents Page Setting the Optimal Resolution: HP w19 LCD Monitor The recommended resolution for this monitor is 1 440 by 900.
Back to Contents Page Contr ols: HP w19 LCD Monitor Operating Instructions • External Controls • OSD Lock Function • How to Adjust a Setting • Adjusting the Picture • LED Indicators Operating Instructions Press the power button ( E ) to turn the monitor on or off.
Adjusting the Picture Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description Contrast Contrast from digital-register Luminance Brightness Backlight adjustment Focus Adjust picture phase to reduce horizontal-line noise Image Setup Clock Adjust picture clock to reduce vertical-line noise H.
LED Indicators Status LED Color Full Power Mode Green Active-off Mode Red See Technical Support FAQ for more information. Back to Contents Page Installing Drivers and Using th e Auto-Adjustment Featur.
Back to Contents Page T echnical Support F AQ: HP w19 LCD Monitor T echnical Suppor t F AQ (Frequently Asked Questions) Problem & Question Possible Solutions Power LED is not on • Make sure the power button is on and the power cord is properly connected to a grounded power outlet and to the monitor .
Back to Contents Page Specifications: HP w19 LCD Monitor General • LCD Panel (19") • Resolution • Preset Display Modes • Environmental • Physical Characteristics • Power Cord Set Requ.
Preset Display Modes Standard Resolution Horizontal Frequen cy (kHz) V er tical Frequency ( Hz) Dos-mode 720 x 400 31.47 70.0 VGA 640 x 480 31.47 60.0 VGA 640 x 480 37.50 75.0 SVGA 800 x 600 37.879 60.0 SVGA 800 x 600 46.875 75.0 XGA 1024 x 768 48.363 60.
Power Cord Set Requirements The monitor power supply is provided with automatic line sw itching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V .
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2– 9 TMDS Data 1– 17 TMDS Data 0– 2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+ 3 TMDS Data 2/4 Shield 11 TMDS Da ta 1/3 .
Back to Contents Page Agency Regulator y Notice s: HP w19 LCD Monitor Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Cau sing Equipment Regulations. A vis Canadien Cet appareil numérique de la classe B respecte toutes les exigen ces du Règlement sur le matériel brouilleur du Canada.
Japanese Power Cord Notice Korean Notice Materials Disposal This HP product contains the following materials that require sp ecial handling at end-of-life: • Mercur y in the fluorescent lamp in the display LCD. • Lead in the solder and some component leads.
An important point after buying a device HP (Hewlett-Packard) W19 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) W19 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) W19 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) W19 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) W19 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) W19, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) W19.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) W19. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) W19 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center