Instruction/ maintenance manual of the product T300 HP (Hewlett-Packard)
Go to page of 8
HP UP S R/T3000 Installati on Instr uc tio ns Ov er v ie w The HP UPS R/T3000 fea tures a 2U rack-mount with convertible tower design and offers power prot ection for loads up to a maximum of 3300 VA/3000 W (t hese numbers might vary by model).
• Warranty information • Rails, with mounting hardware • Tower conversion stand (2) • Front mounting ears (2) and associated hardware • UPS • Front bezel • Mounting ear covers (2) (for r.
NOTE: If preparing the rails for integrated shipping, follow the same instructions as in "Installing the UPS ("Installing the UPS in a rack" on page 3)." NOTE: Mounting hardware for square- and round-holed racks is included in the UPS kit.
CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the heaviest item first, and continue to populate the rack from the bottom to the top. 1. Install the mounting rails ("Inst alling the mounting rails" on page 2).
Connecting the USB communications port Connecting the REPO port WARNING: The pins on the REPO port are polarity sensitive. Be sure to verify polarity while connecting the REPO port. WARNING: To meet the requirements stated in NEC (NFPA 70) Articles 645-10 an d 645-11, a UPS installed in a computer equipment room must be connected to a REPO circuit.
The ground bonding cable is not included. Connecting the UPS to utility power WARNING: To prevent injury from electric shock or damage to the equipment: • Plug the input line cord into a grounded (earthed) electrical outlet that is installed near the equipment and is easily accessible.
Connecting the battery leads Rotating the logo badge Gently pull out the logo badge, rotate it 90 degrees, and then replace it in the bezel. Attaching the UPS front bezel Attaching the tower conversio.
Inst alling the e xtensi on bars (if inc luded) C onnec ting and sec ur ing the po w er cor ds.
An important point after buying a device HP (Hewlett-Packard) T300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) T300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) T300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) T300 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) T300 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) T300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) T300.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) T300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) T300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center