Instruction/ maintenance manual of the product R5500 HP (Hewlett-Packard)
Go to page of 6
HP UP S R5 5 00 ERM In stal la tion In struct ions June 2006 (Third Edition) Part Number 351641-003 Ov er v ie w The ERM consists of two battery packs in a 3U chassi s. The ERM connects directly to a UPS R5500 or to another ERM. Up to two ERM units can be connected.
T ools and mate r ials The following tools are required for install ation: • Phillips screwdriver • 10-mm hex-nut driver The following items are sup plied with the rack: • Screws • Hex nuts .
2. Insert screws through the rack into the mounting rail and the front of each mounting bracket. 3. Install cage nuts or clip nuts into the rear of the rack. 4. Insert screws through the mounti ng rail into the cage nuts or clip nuts. 5. Tighten the hex nuts.
P o w er ing do w n the UP S 1. Shut down all load devices. 2. Press the Standby button to take the UPS out of Operate mode. Power to the lo ad receptacles ceases. 3. Disconnect the UPS from utility power. 4. Wait at least 60 seconds for the UPS internal circuitry to discharge.
Connecting the ERM to the UPS NOTE: To install a second ERM, plug the cable from the second ERM into the socket at the rear of the first ERM. Up to two ERM units can be connected. Switching on the ERM circuit breaker Charging the ERM batteries Connect the UPS to a grounded utility power outlet.
3. Press the Standby button to select the nominal voltage configuration. The LED associated with the old input voltage parameter turns off, and the LED associated with the new input voltage parameter illuminates solid gr een. NOTE: Only one nominal utility voltage can be configured.
An important point after buying a device HP (Hewlett-Packard) R5500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) R5500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) R5500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) R5500 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) R5500 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) R5500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) R5500.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) R5500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) R5500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
