Instruction/ maintenance manual of the product CQ1569X HP (Hewlett-Packard)
Go to page of 35
LV1561w, LV1561ws, LV1561x, CQ1569, and CQ1569x LCD Monitors User Guide.
© 2009, 2011 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademar ks of Microsoft Corporation in the U nited States and/or other countries.
About This Guide This guide provides information on set ting up the monitor, installing driv ers, using the on-scree n display menu, troublesho oting and technical specification s. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of li fe.
iv About Thi s Guide.
Table of contents 1 Produc t Feat ures .......... ............ ......... ........... ............ ............ ............. ............ ........... ..... ......... .......... ........... ... 1 LCD Moni tors . ............ .......... ............. ..
Enter ing User Modes ... ........... .......... ......... .......... ........... .......... ............ ......... ............ ........ 2 2 Energy Saver Feature ................ .............. ............... ............. ................ ..........
1 Product Features LCD Monitors The LCD (liquid crystal display) mo nitors have an active matrix, th in-film transistor (TFT) panel. The monitor models and fea tures include: ● 39.
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If an other cord is used, u se only a power source a nd connectio n appropr iate for th is monitor. For inform ation on th e correct po wer cord set to use with the monitor, r efer to the Power Cord Set Requirements on page 25 in Appendix C.
Maintenance Guidelines To enhance th e performance and extend the life of th e monitor: ● Do not ope n the monit or cabine t or attemp t to se rvice thi s product yourse lf. Adjust only those controls that are covered in th e operating instru ctions.
Cleaning the Monitor 1. Turn off the m onitor and un plug the power cord from th e back of the unit. 2. Dust the monito r by wiping the scre en and the cabine t with a soft, clean ant istatic cloth. 3. For more difficult cleaning situations, use a 50/50 mix of wate r and Isopropyl al cohol.
3 Setting Up the Monitor To set up the monitor, en sure that the power is turned off to the monito r, computer system, a nd other attached devices, then follow the instructions below. Installing the Monitor Base To install the monitor base: 1. Place the base on a smooth, flat surface.
Identifying Rear Components Figure 3 -2 Rear Compo nents Component Funct ion 1 AC Power Conn ector Connects the AC power cord to the monitor. 2 VGA Connector Connects the VGA (15-pi n D- Sub) cable to the monitor. 3 Audio Port (select models) Connects the audio ca ble (provi ded with select models) to the monitor.
Connecting the Cables 1. Place the monitor in a convenient, well- ventilated location near the computer. 2. Connect the p ower cable to the AC power connector on th e back of the monitor. WARNING ! To reduce the risk of electric sh ock or damage to the equipment: Do not disable th e power cord groun ding plug.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time. To avoid burn-in image damage on your moni tor screen, you should always activate a screen saver application or turn off the monitor when it i s not in use for a prolonged period of time.
7. Refer to the user manual that came with the o ptional mounting fixtu re additional mounting instructions. Figure 3-4 Removing the Monitor Base Mounting th e Monitor 9.
Locating the Rating Labels The rating labels on the monitor pro vide the spare part number, produ ct number, and serial number . You may need th ese numbers when contac ting HP about th e monitor mod el. The rati ng labels are loca ted on the b ack of the monitor.
4 Operating the Monitor Installing the Driver You can install the monito r-driver INF and IC M file s from the CD (included with select model s) or download from the Internet. Installing from the CD To install the .INF and .ICM files on the computer from th e CD: 1.
Table 4-1 Monito r Front Panel Control s Control Function 1 Auto/OK When the OSD is open, press to sele ct the menu. When the OSD is closed, press to activate the auto-adjustment function. 2 – (Minus) When the OSD is closed, pres s to activate the vo lume adjustment bar.
Adjusting the Monitor Settings The monitor setti ngs can be adjusted from th e On-Screen Display (OSD) menu. T o access the OSD and adjust screen settings base on yo ur viewing preference , do the following : 1. If the monitor is not already on, press the power button to turn on the mo nitor.
Table 4-2 OSD Menu (continued) Icon Main Menu Su bmenu Description Horizontal Position Adjusts the positio n of the screen image left and right. Vertical Position Adjusts the position of the screen image up and down. Custom Scaling Selects the method on how displayed information on the monitor will be formatted.
Table 4-2 OSD Menu (continued) Icon Main Menu Su bmenu Description OSD Control Adjusts the position of the OSD menu screen to: ● Horizontal OSD Position-Ch anges the viewing position of the OSD menu to the left or right area of the screen. T he factory default range is 50.
Table 4-2 OSD Menu (continued) Icon Main Menu Su bmenu Description Sleep Timer Provides the timer adjustment menu o ptions: ● Set Current Time—sets the current time in hours and minutes ● Set Sl.
Using the Auto-Adjustment Function You can optimize the screen pe rformance for the VGA (an alog) input by using the Auto /OK button on the monito r. This procedure can co rrect the following image q .
A Troubleshooting Solving Common Problems The following table list s possible problems, the possible cause of each problem, and t he recommended solutions.
Problem Possible Cause Solution Missing one of the primary colors (Red, Green, or Blue). The video cable or video card is not properly connected. Inspect the monitor's vi deo cable a nd make sure that none of the pins are bent. Make sure the monitor's video cable is properly connected to the computer.
B Technical Specifications NOTE: All performan ce specificatio ns are provided by the component manufa cturers. Performan ce specifications represent the h ighes t specification of all HP's compo nent manufacturers' typical level specifications for performance and actual perfo rmance may vary either high er or lower.
Table B -1 15.6” LCD Moni tors (continued) Environmental Requirements Temperature Operating Temperature Storage Temperature 0° to 40° C -20° to 60° C 32° to 104° F -4° to 140° F Relative Hum.
Table B -2 Factory Preset Modes (co ntinued) 4 1280 x 720 45.00 60.00 5 1280 x 1024 63.98 60.02 6 1366 x 768 47.712 59.79 Entering User Modes The video controller sig nal may occasionally ca ll for a mode that is not preset if: ● You are not using a standard graphics adapter.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment ha s been teste d and found to comply with the limits fo r a Class B digita l device, pursuant to Part 15 of the FCC Rules. These lim its are de signed to provide reason able protection against harmful interferen ce in a residential inst allation.
For questions regard ing this FCC declaration, contac t: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 7726 9-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product.
German Ergonomics Notice HP products which bear th e “GS” approval m ark, when formin g part of a system compri sing HP brand computers, keyboards and monitors that bear th e “GS” appro val mark, meet the applicable ergonomic requirements. The installation guide s included wi th the products provide configura tion information.
Product Environmental Notices ENERGY STAR® Qualification HP Displays marked with the ENERGY STAR® certif ication mark meet the requirements of the U.S. Environmental Protection Agency (EPA) ENER GY STAR program. The EPA ENERGY STAR® certification mark does not impl y endorsement by the EPA.
Disposal of Waste Equipment by U sers in Private Household in the European Union This symbol on the produ ct or on its packagin g indicates that this prod uct must not be dispo sed of with your household waste.
Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeli ğ ine Uygundur Україна обмеження на наявність небезпечних речовин (Ukraine rest.
D LCD Monitor Quality and Pixel Policy The TFT monitor u ses high-precision technology , m anufactured according to HP standard s, to guarantee trouble- free performanc e. Nevertheless, the display may have cosmetic imperfection s that appear as small bright or dark spots.
An important point after buying a device HP (Hewlett-Packard) CQ1569X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) CQ1569X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) CQ1569X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) CQ1569X you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) CQ1569X will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) CQ1569X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) CQ1569X.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) CQ1569X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) CQ1569X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
