Instruction/ maintenance manual of the product CQ1569 HP (Hewlett-Packard)
Go to page of 33
HP LV1561w, LV1561ws, and CQ1569 LCD Monitors User Guide.
© 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or register ed trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies.
About This Guide This guide provides information on setting up the monito r, installing dri vers, using the on-screen displa y menu, troubleshooting and technical specifi cations. WARNING! Text set off in this manner in dicates that failure to follow di rections could result in bodily harm or loss of life.
iv About Thi s Guide ENWW.
Table of contents 1 Product Features HP LCD Moni tors .......... ........... ............. .......... .............. .......... ............. ........... ............ ....... ......... ......... 1 2 Safety and Maintena nce Guidelines Important Safety Information .
Appendi x C Agenc y Regulat ory Not ices Feder al Communic ations Commissi on Notice .................. ........................ ................... ...................... 22 Modifications ....... ......... ............ ............ ............ .....
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an ac tive matrix, thin-film tran sistor (TFT) pan el. The monitor models and feature s include: ● 39.
2 Safety and Maintenance Guidelines Important Safety Information A power cord is include d with the monitor. If ano ther cord is used, use only a power source and connection app ropriate for this monitor. For informat ion on th e correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 24 in Appendix C.
Maintenance Guidelines To enhance th e performance and extend the life o f the monitor: ● Do not open the mo nitor cabinet or attempt to se rvice this product yourself.
3 Setting Up the Monitor To set up the monitor, ensure that the power is turn ed off to the monitor, co mputer system, and other attached de vices, then follow the instructi ons below. Installing the Monitor Base To install the monitor base : 1. Place the base on a smooth, flat surface.
Identifying Rear Components Figure 3 -2 Rear Components Component Functio n 1 AC Power Connec tor Connects the AC power cord to the monitor. 2 VGA Connector Connects the VGA (15-pin D-Sub) cable to the monitor . 3 Audio Port (select models) Connects the audio cable (provided with select models) to the monitor.
Connecting the Cables 1. Place the monito r in a convenie nt, well-v entilated locatio n near the computer. 2. Connect the p ower cable to the AC power connector on the back of th e monitor. WARNING! To reduce the risk of electric shock or dama ge to the equipme nt: Do not disable the po wer cord grounding plug.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged perio d of time. To avoid b u rn-in image damage on your monitor screen, you should always activa te a screen sa ver application or turn off the mo nitor when it is not in use for a prolonged period of time .
7. Refer to the user manual th at came wi th t he optional mounting fixtu re additio nal mounting instructions. Figure 3-4 Removi ng the Monito r Base 8 Chapter 3 Se tting Up the Monitor ENWW.
Locating the Rating Labels The rating labels on the moni tor provide the sp are part number, pro duct number, and serial number. You may need th ese numbers when conta cting HP about the monitor mode l. The rati ng labels are loca ted on the back of the monitor.
4 Operating the Monitor Installing the Driver You can install the mo nitor-driver INF and ICM file s from the CD (included with select models) or download from the Internet . Installing from the CD To install the .INF and .ICM file s on the co mputer from the CD: 1.
Setting the Optimal Resolution The recommende d resolution for this moni tor is 1366 x 76 8. To configure the monitor to this resolutio n, do the following. 1. Click the Windows Start butto n, and then select Control Panel . 2. Under Appearanc e and Personalization , select Adjust Screen Resolutio n .
Control Functi on 4 Menu Press to open the OSD window. 5 Power Turns the monitor on and off. LED status: ● Full Power Mode - Green or Blue ● Active-off Mode - Orange or Red Adjusting the Monitor Settings The monitor settings can be adjus ted from the On-Screen Display (OSD) menu.
OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their fun ctional descriptions. Table 4-2 OSD Men u Icon Main Menu Submenu Description Brightness Adjustable scale Adjusts the brightness level of the scr een.
Icon Main Menu Submenu Description Custom Settings saved when user adjusts the Brightness, Contrast, or Color in one of the QuickView options. Language Selects the language in which the OSD menu is displayed. Management Selects the power-management fea tures of the monitor.
Icon Main Menu Submenu Description Sleep Timer Provides the timer adjustment menu options: ● Set Current Time—sets the current time in hours and minutes ● Set Sleep Time—sets the time you want.
Using the Auto-Adjustment Patt ern Software (Select Models) If a CD is provided wi th your monitor, use th e Auto-Adjustment Pat tern softwar e provided on the CD to improve the screen image. 1. Insert the CD in your computer CD drive. The CD menu is displayed.
A Troubleshooting Solving Common Problems The following table lists possible prob lems, the po ssible cause of ea ch problem, and the recommended solutions.
Problem Possible Cause Solution while observing the Caps Lock LED. The LED should either turn on or off after pressing the Caps Lock key. Missing one of the primary colors (Red, Green, or Blue). The video cable or video card is not properly connected.
B Technical Specifications NOTE: All performance specifications a re provided by the component manu facturers. Perf ormance specifications repr esent the highest specification of all HP's component manufacturers' typical level specifications for pe rformance and actual performance may vary either higher or lower.
Environmental Requirements Tempe ratur e Operating Temperature Storage Temperature 0° to 40° C -20° to 60° C 32° to 104° F -4° to 140° F Relative Humidity Operating Non-operating 10% to 85% (non-condensing) 5% to 80% (non-condensing) Power Source 100 ~ 240 VAC, 50/60 Hz Altitude: Operating Non-operating 0 ~ 3000m 0 ~ 5000m 0 ~ 10000 ft.
The monitor also supports a powe r saver mode that is controlled by the co mputer. When th e monitor is in the reduced-power state, the monitor screen is blank, the backlight is off, and the Power light is am ber.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to p rovide reasonable protection against h a rmful interference in a residential installa tion.
Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaratio n, contact: Hewlett Packard Company P.
Hewlett-Packard GmbH, HQ-TRE , Herrenberger Strasse 140, 71034 Boeblingen , Germany German Ergonomics Notice HP products which bear t he “GS” approval mark, when forming part of a system comprising HP brand computers, keybo ards and monitors th at bear the “GS” approval mark, meet the applicable ergonomic requirements.
Product Environmental Notices Energy Star Compliance Monitors that are marked with the ENERGY STAR Logo meet the require ments of the U.S. Environmental Protection Agency (EPA) ENERGY STAR program. As an ENERGY STAR Partner, Hewlett Packard Company has de termined that th is product meets the ENERGY STAR guideline s for energy efficiency.
of the Europe an Parliament and Co uncil). A chemica l informatio n report for this product can be found at http/ / www,hp.com/go/re ach . Restriction of Hazard ous Substances (RoHS) A Japanese regu l.
D LCD Monitor Quality and Pixel Policy The TFT monitor u s es high-precision techno logy, manufactured according to HP standards, to guarantee trouble-free performanc e. Nevertheless, the display may ha ve cosmetic imperfections th at appear as small b right or dark spots.
An important point after buying a device HP (Hewlett-Packard) CQ1569 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) CQ1569 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) CQ1569 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) CQ1569 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) CQ1569 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) CQ1569, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) CQ1569.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) CQ1569. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) CQ1569 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
