Instruction/ maintenance manual of the product C9V75A8ABA HP (Hewlett-Packard)
Go to page of 31
HP EliteDisplay LED Backlit Monitors User Guide.
© 2012, Hewlett-Packard Deve lopment Company, L.P. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. The only warrantie s for HP products and services are set forth in the express warranty statements accompanying such products and services.
About This Guide This guide prov ides information on m onitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of li fe.
iv About Thi s Guide.
Table of contents 1 Produc t Feat ures ........ ......... ......... ............ ......... ............ .......... .......... ............ ......... ....... ..... ........... .......... ....... 1 HP LCD Monito rs ... ............. .......... .........
vi.
1 Product Features HP LCD Monitors The LCD (liquid crystal display) mo nitors have an active matrix, th in-film transistor (TFT) panel. The monitor models and fea tures include: ● E201 model, 50.
● Energy saver feat ure to meet requir ements for reduced power consumption ● Energy Star® qualified ● Intelligent M anagement AssetControl ● Compliant with the follo wing regu lated specific.
2 Setting Up the Monitor To set up the monitor, en sure that the power is turn ed off to the mon itor, compu ter system, and other attached devices, then follow the instructions below. Unfolding the Monitor 1. Lift the monitor fro m its box and place it face down o n a flat surface.
Rear Components Component Funct ion 1 USB 2.0 Downstream Connectors (2) Connects optional USB devices to the mon itor. 2 AC Power Conn ector Connects the AC power cord to the monitor. 3 DisplayPort Connects the Displa yPort cable to the monitor. 4 VGA Connects the VGA cable to the monitor.
Connecting the Cables 1. Place the monitor in a convenient, well- ventilated location near the computer. 2. Remove the cable ma nagement clip from the back of the stan d by pressing inwa rd on one si de of the clip (1) and pulling outward on the other side of the clip (2) 3.
● For DVI digital operation, connect the DVI-D si gnal cable to the DVI connector on the rear of the monito r and the other end to the DVI co nnector on the computer (cable pro vided with select models).
4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the computer, an d the other end to the upstream USB conne ctor on the m onitor. 5. Connect one end of th e power cord to the AC power connecto r on the back of the monitor, and the other end to an electrical wall outlet.
6. Secure the cables in p lace with the cable management clip. Press the clip stra ight down into the slots on the back of the stand ensuri ng that the ta bs on the sides of the clip snap in to the slots on the stand.
Front Panel Controls Control Functi on 1 Menu Opens, selects or exits the OSD menu. 2 Minus If the OSD menu is on, press to navigate backwar d through the OSD menu and decrease adjustment levels. 3 Plus/Input If the OSD menu is on, press to navigate forward thr ough the OSD menu and increase adjustment levels.
Adjusting the Monitor NOTE: Your monitor model may look different than the model in the following illustrations. 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. 2. Swivel the monitor to the le ft or right for the b est viewing angle.
3. Adjust the monitor’s height to a comfortable position for you r individua l workstation. The monitor’s top bezel edge should not exceed a height that is para llel to your eye h e ight. A monitor that is positioned low an d reclined may be more comfortable for users with corrective lenses.
NOTE: To view informati on on the scree n in portrait mode, you can install the HP Display Assistant software included on the software and documentation CD.
Turning on the Monitor 1. Press the power but ton on the compute r to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the sa me static image on screen for a prolon ged period of time .
Connecting USB Devices USB connectors are used to connect devices su ch as a digita l camera , USB keyboard, or USB mouse. Two USB conn ectors are located on the side panel of the monitor. NOTE: You must connect the USB hu b cable from the mon itor to the computer to enable the USB 2.
Removing the Monitor Stand You can remove the monitor pa nel from the stand to install the pa nel on a wall, a swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure th e monitor is turned off and the power and signal cable s are both disconne cted.
Mounting the Monitor The monitor pane l can be attached to a wall, swing arm, or other mounting fi xture. NOTE: This apparatus is intended to b e supporte d by UL or CSA Listed wall mo unt bracket. 1. Remove the monitor panel from the stand. Refer to Removing the Mon itor Stand on page 15 .
Locating the Rating Labels The rating labels on the monitor provide the spare pa rt number, product nu mber, and serial number. You may need th ese numbers when conta cting HP a bout the moni tor model. The ra ting labels are located on the re ar panel of the monitor di splay head.
3 Finding More Information Reference Guides Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additiona l information on: ● Optimizing monitor performance ● Saf.
A Technical Specifications NOTE: All specifications represent the typical sp ecifications provided by HP's component manufacturer s; actual performanc e may vary either higher or lower. E201 Model Display Type 50.8 cm wide screen TFT LCD 20 inches wide screen Viewable Image Size 50.
Measured Power Consumption: Full Power Typical Settings Sleep Switch Off 30 watts 25 watts 0.5 watts 0.5 watts Input Terminal One VGA connector; one DVI connector; one DisplayPort connector (cable inclusion varies by region) E221 Model Display Type 54.
Measured Power Consumption: Full Power Typical Settings Sleep Switch Off 33 watt s 29 watt s 0.5 wat ts 0.5 wat ts Input Terminal One VGA connector; one DVI connector; one DisplayPort connector (cable inclusion varies by region) E231 Model Display Type 58.
Measured Power Consumption: Full Power Typical Settings Sleep Switch Off 36 watt s 33 watt s 0.5 wat ts 0.5 wat ts Input Terminal One VGA connector; one DVI connector; one DisplayPort connector (cable.
Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatica lly recognizes these preset mode s and they will appear properly sized and centered on the screen.
Preset Timing Name Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 480p 720 × 480 31.469 60 2 576p 720 × 576 31.25 50 3 720p50 1280 × 720 37.5 50 4 720p60 1280 × 720 45 60 5 1080p50 1920 × 1080 56.25 50 6 1080p60 1920 × 1080 67.5 60 E231 Model Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 640 × 480 31.
It this occurs, you may need to re adjust the parameters of the mo nitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognize s the new mode just as it doe s a preset mode.
An important point after buying a device HP (Hewlett-Packard) C9V75A8ABA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) C9V75A8ABA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) C9V75A8ABA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) C9V75A8ABA you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) C9V75A8ABA will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) C9V75A8ABA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) C9V75A8ABA.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) C9V75A8ABA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) C9V75A8ABA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
