Instruction/ maintenance manual of the product C3Z94AAABA HP (Hewlett-Packard)
Go to page of 29
Pavilion IPS LED Backlit Monitors User Guide.
© 2012, Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in t he United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
About This Guide This guide provides information on monitor features , setting up the monitor, using the software and technical specifications. WARNING! Text set off in this manner indicates that fail ure to follow directions could result in bodily harm or loss of life.
iv About This Guide.
Table of contents 1 Product Features ................... ..................... ............................ ..................... .................. .... 1 HP Pavilion I PS Mo nitors ...... ............ .......... ............. .......... ............
vi.
1 Product Features HP Pavilion IPS Monitors The LCD (liquid cryst al display) mo nitors have an active matrix, In-Plane Switching (IPS) panel. The monitor models and features include: ● 20xi/20bw/20fi models, 50.
● Energy saver feature to meet requir ements for reduced power consumption ● Safety guidelines, certifications, and regulatory notices for the se products are avai lable in the HP LCD Monitors Reference Guide on the CD included with this monitor.
2 Setting Up the Monitor To set up the monitor, ensure th at the power is turned off to the monitor, co mputer system, and other attached devices, then fo llow the instructions below. Attaching the Monitor Base CAUTION: The screen is fragile. Avoid touchi ng or app lying pressur e to the screen; doing so can cause damage.
3. Attach the base to the stand. NOTE: For the 25” and 27” models, ti ghten the screw on the bottom of the base by hand. For all other models, attach the base to the stand a nd the plastic hook will automati cally lock .
Rear Components Figure 2-3 Rear Components Component Functio n 1 HDMI* Connects the HDMI cable from the com puter to the monitor. 2 DVI-D Connects the DVI-D cable from the computer to the monitor. 3 VGA Connects the VGA cable from the comp uter to the monitor.
Connecting the Cables 1. Place the monitor in a convenient, well-v entilated location near the computer. 2. Connect a signal cable. NOTE: The monitor is capable of supporting analog , digital, or HDMI input. The video mode is determined by the video cable used.
● For DVI digital operation, use a DVI-D signal ca ble. Connect the DVI-D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI connector on the computer.
3. Connect the round end of the power supply cord to the monitor, and then connect one end of the power cord to the po wer supply and the othe r end to a grou nded electrical ou tlet. Figure 2-7 Connecting the Power Cable WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord gr ounding plug.
Front Panel Controls Figure 2-8 Monitor Front Panel Controls NOTE: The front panel controls on the HP 25xi/25bw and HP 27xi/27bw models are inactive unless they are illuminated. To activate the controls, tap on the area where the icons are located. All icons will become illumi nated and activ e.
NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Med ia Library at http://www.hp.com/ go/sml . Adjusting the Monitor Tilt the monitor panel forward or backward to set it to a comfortable eye level. Figure 2-9 Tilting the Monitor Turning on the Monitor 1.
The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will di splay the default input source.
Installing a Cable Lock You can secure the monitor to a fixed object with an optional cab le lock available from HP. Figure 2-11 Installing a Cable Lock 12 Chapter 2 Setting Up the Monitor.
3 Using My Display Software The CD provided with the monitor includes My Di spla y software. Use My Di splay software to choose preferences for optimum viewing. Y ou can select settings for gaming, movies, photo editing or just working on do cuments an d spreadshee ts.
4 Finding More Information Reference Guides Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional information on: ● Optimizing monitor performance ● Safe.
A Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's compo nent manufacturers; actual performance may vary either higher or lower. 20xi/20bw/20fi Models Table A-1 20xi/20bw/20fi Models Specifications Display Type 50.
Table A-1 20xi/20bw/20fi Models Sp ecifications (continued) Altitude: Operating Storage 0 to 5000 m 0 to 12192 m 0 to 16,400 feet 0 to 40,000 feet Measured Powe r Consumption: Full Power Typical Settings Energy Star® Test Methods Sleep Switch Off 22 watts 20 watts 16.
Table A-2 22xi/22bw/22fi Models Sp ecifications (continued) Environmental Requirements Temperature Operating Temperature Storage Temperature 5 to 35° C -20 to 60° C 41 to 95° F -4 to 140° F Relati.
Table A-3 23xi/23bw/23fi Model Spec ifications (continued) Text Mode 720 x 400 Dot Pitch 0.265 (H) x 0.265 (V) m m Pixels Per Inch 96 PPI Horizontal Frequency 24 to 94 kHz Vertical Refresh Rate 50 to .
Table A-4 25xi/25bw Models Sp ecifications (continued) Dimensions (include b ase) Height Depth Width 42.94 cm 19.23 cm 57.77 cm 16.91 inches 7.57 inches 22.
27xi/27bw Models Table A-5 27xi/27bw Models Specifications Display Type 68.6 cm wide screen IPS 27 inches wide screen Viewable Image Size 68.6 cm diagonal 27–inch diagonal Tilt -5 to 25° Maximum Weight (Unpacked) 5.3 kg 11.68 lbs Dimensions (include b ase) Height Depth Width 45.
Table A-5 27xi/27bw Models Spec ifications (continued ) Measured Powe r Consumption: Full Power Typical Settings Energy Star® Test Methods Sleep Switch Off 35 watts 32 watts 24.
Table A-7 Factory Preset Modes (contin ued) 5 1280 × 720 45 60 6 1280 × 1024 63.981 60.02 7 1440 × 900 55.935 59.887 8 1600 × 900 60 60 9 1680 × 1050 65.29 59.954 10 1920 × 1080 67.5 60 Table A-8 High Definition V ideo Formats Preset Timing Name Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 480p 720 × 480 31.
Energy Saver Feature The monitors support a reduced po wer state. The red uced power state will be entere d into if the monitor detects the absence of either the horizontal sync signal and/ or the vertical sync signal.
An important point after buying a device HP (Hewlett-Packard) C3Z94AAABA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) C3Z94AAABA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) C3Z94AAABA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) C3Z94AAABA you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) C3Z94AAABA will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) C3Z94AAABA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) C3Z94AAABA.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) C3Z94AAABA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) C3Z94AAABA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
