Instruction/ maintenance manual of the product 30292B HP (Hewlett-Packard)
Go to page of 24
technology HP 3000 Business Servers Networking HP 3000 Bus ness Ser vers SNA NRJE Network Remote Job Entry This paragraph describes System Network Architecture Network Remote Job Entry (SNA NRJE) for both the MPE V (SNA NRJE/V) and MPE/iX (SNA NRJE/iX) operating systems.
HP 3000 Bus ness Ser vers SNA NRJE/iX requires the installation and use of SNA/SDLC Link/iX (30291A), SNA/T oken Ring Link/iX (J2249A, requires MPE/iX Release 5.0 or later) or SNA/X.25 Link/iX (30298A), SNA NRJE/V requires SNA Link/V (30246A). SNA/SDLC Link/iX, SNA/T oken Ring Link/iX, SNA X.
HP 3000 Bus ness Ser vers 3 The Output Management feature of SNA NRJE allows users to have job output routed based on the form selected by the user’ s host JCL and a Lookup T able which provides a mapping between host form names and HP 3000 file equations.
HP 3000 Bus ness Ser vers 4 HP will support certain versions, releases, modifications, and Product T emporary Fix (PTF) levels of the above software. The Network Implementations Support Plan (NISP) will help the customer engineer determine support requirements in advance of SNA NRJE in a particular network.
HP 3000 Bus ness Ser vers • Updating the HP 3000 system to the proper release level and installing the SNA NRJE software using AUTOINST . Refer to the HP 3000 MPE/iX Installation and Update Manual (36123-90001) for MPE/iX systems or the HP 3000 Software Update Manual (32033-90036) for MPE V systems.
HP 3000 Bus ness Ser vers 6 SNA IMF/iX Interactive Mainframe Facility The SNA Interactive Mainframe Facility/iX (SNA IMF/iX) product provides IBM 3270 device emulation for Hewlett-Packard terminals, printers, and HP 3000 Series 900 systems. (SNA IMF/V , P/N 30247A, provides similar functionality for MPE V systems.
HP 3000 Bus ness Ser vers 7 applications via intrinsics. The customer’ s application program decides which intrinsics to call. In Pass Thru mode, an HP-written application program on the HP 3000 also emulates IBM 3270 terminals and printers, exchanging data with host applications via intrinsics.
HP 3000 Bus ness Ser vers Program access is accomplished through use of a set of intrinsics that are powerful procedures, which perform the low-level task of decoding the data streams.
HP 3000 Bus ness Ser vers T able 2. Using the Pass Thru mode does not require the use of dedicated terminals. The Pass Thru mode of SNA IMF/iX is mot intended as a replacement for real IBM 3270 devices.
HP 3000 Bus ness Ser vers • SNA IMF/iX does not support the numeric lock feature. • Pass Thru mode does not support slave printers (printers attached to terminals).
HP 3000 Bus ness Ser vers • Link Level Message encoding: – SNA IMF/iX supports both NRZ and NRZI encoding. • Access to the SNA IMF/iX intrinsics in pro- grammatic mode is provided in capability- mode as well as native-mode with the use of HP-provided switch stubs.
HP 3000 Bus ness Ser vers • V erifying that all of the necessary software modules have been successfully installed by AUTOINST and are at the NMMAINT .
HP 3000 Bus ness Ser vers 13 LU 6.2 Application Programming Interface This data sheet describes HP LU 6.2 API (Application Programming Interface) for both MPE V and MPE/iX operating systems. The term HP LU 6.2 API is used to refer to both HP LU 6.2 API/V and HP LU 6.
HP 3000 Bus ness Ser vers HP LU 6.2 API provides • High-level Intrinsics: HP 3000 program- mers can use a set of high-level intrinsics to implement program-to-program communica- tion in an SNA network. • Support for Major Languages: Application programs on the HP 3000 can be written in COBOL II, T ransact, or Pascal.
HP 3000 Bus ness Ser vers Functional Description HP LU 6.2 API provides a set of high-level intrinsics for application programmers to use for program-to-program communication between an HP 3000 application program and an application program running on an IBM host mainframe.
HP 3000 Bus ness Ser vers Product Requirements Requirements for IBM mainframe hardware and software are the same for both HP LU 6.2 API/V and HP LU 6.2 API/iX. IBM Mainframe Hardware Requirements: • An IBM System/370 mainframe. This may be any IBM plug-compatible mainframe that supports 370 architecture.
HP 3000 Bus ness Ser vers – Physical network map identifying relevant network hardware components. • V erifying that the necessary host mainframe or AS/400 software is installed and config- ured to support HP LU 6.
HP 3000 Bus ness Ser vers 18 SNA Distributed Host Command Facility The HP SNA Distributed Host Command Facility/iX (HP SNA DHCF/iX) software product provides IBM mainframe users who use IBM 3270 display stations with interactive access to an HP 3000 Series 900 system.
HP 3000 Bus ness Ser vers Functional Description HP SNA DHCF/iX is a software product that provides an IBM 3270 display station with access to applications on an HP 3000. SNA DHCF/iX emulates many features of a remotely attached HP terminal; thus, it appears as if the IBM 3270 display station has a direct connection to the HP 3000 computer .
HP 3000 Bus ness Ser vers HP 3000 applications that use special screen- mode or block-mode features that are specific to HP terminals are not supported. Some of these restrictions include: • HP terminal escape sequences used for cur- sor positioning, terminal strap settings, pro- grammable softkeys, etc.
HP 3000 Bus ness Ser vers • Using an HP 3000 Series 900 and SNA DHCF/iX as a gateway system, IBM 3270 display stations can access only TTY -mode applications on other HP 3000 MPE/iX sys- tems. Access to other systems requires the NS Network Service and Link products.
HP 3000 Bus ness Ser vers • V erifying that SNA Link is properly installed and configured prior to this installation of SNA DHCF/iX unless SNA Link will be installed at the same time. • Updating the HP 3000 system to the proper release level and installing the SNA DHCF/iX software using AUTOINST .
HP 3000 Bus ness Ser vers Support Products HP offers a spectrum of support service products to help plan, implement, operate, and manage your multivendor network throughout the network lifecycle. For more information, contact your HP Sales Representative, or refer to the HP data sheets for specific support services.
HP 3000 Bus ness Ser vers For additional information please contact any of our worldwide sales offices or HP Channel Partners. For the location of the nearest sales office call: United States of Ameri.
An important point after buying a device HP (Hewlett-Packard) 30292B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 30292B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 30292B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 30292B you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 30292B will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 30292B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 30292B.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 30292B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 30292B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
