Instruction/ maintenance manual of the product HY-280 QuietSet Honeywell
Go to page of 8
1 THERMAWAVE CERAMIC HEATER Model HZ-850 Series Model HZ-860 Series The Honeywell trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.
2 10. CAUTION – THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE THE RISK OF SHOCK, THIS PLUG IS INTENDED TO FIT ONLY ONE WAY IN A POLARIZED OUTLET. IF THE PLUG DOES NOT FIT SECURELY IN THE OUTLET, REVERSE THE PLUG.
3 This heater requires simple, no tool assembly. Unpack Main Body and Mounting Base (Fig. 1). Place Mounting Base on a firm surface (upright in any direction). Place ThermaWave Main Body on Mounting Base so Mounting Tabs are aligned with Base Slots. Press Main Body onto the Base until Tabs snaps secure into the Slots (Fig.
4 Model HZ-850 Series - ThermaWave Ceramic Heater Operation The Power Knob is equipped with two (2) settings: 1) Low ( ) – this setting uses 750 watts of power 2) High ( ) – this setting uses 1500.
5 Model HZ-860 Series - EnergySmart ™ ThermaWave Ceramic Heater Operation Turn heater on by pressing ON ( ) button. The heater will default to the Constant HI mode and the Current Temp Indicator will display the current room temperature. The Energy Usage Indicator will display the power consumption used by the heater.
6 SAFETY FEATURES This heater is equipped with several devices and features for added protection: • A tip-over switch that disables the heater if it is accidentally tipped, • Model HZ-850 Series -.
7 CONSUMER RELATIONS Mail questions or comments to: Kaz USA, Inc. Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772 Call us toll-free at: 1-800-477-0457 E-mail: consumerrelations@kaz.com Or visit our website at: www.kaz.com Please be sure to specify a model number.
8 You should first read all instructions before attempting to use this product. A . This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage.
An important point after buying a device Honeywell HY-280 QuietSet (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HY-280 QuietSet yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HY-280 QuietSet - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HY-280 QuietSet you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HY-280 QuietSet will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HY-280 QuietSet, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HY-280 QuietSet.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HY-280 QuietSet. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HY-280 QuietSet along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
