Instruction/ maintenance manual of the product HMLCD19 Honeywell
Go to page of 16
Video Systems www.honeywellvideo.com 1-800-796-CCTV © 2004 Honeywell Internation al Inc. All rights reserved. No part of this publicatio n may be reproduced by any means without written permission from Honeywell V ideo Systems. The information in this publication is believed to be accurate in all respects.
Rev. A ii HMMU000882 04/09/04 ISSUE DATE REVISIONS A April 2004 Initial Release (PCN 1632) Rev. A 21 HMMU000882 04/09/04 SECTION 5: SPECIFICATIONS Type TFT Color LCD Screen Size 19 ” (diagonal) Signal RGB Analog PC Input Type 15-Pin D-Sub H-Freq 31.
Rev. A 20 HMMU000882 04/09/04 4.4 LIMITED WARRANTY Honeywell International Inc. ("Seller"), 130 5 Waters Ridge Drive, Le wisville, TX 75057, warrants this monitor to be i n conformance with .
Rev. A iv HMMU000882 04/09/04 EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symb ol within an equilateral triangle is intended to alert the user to the presence of uninsulated &q.
Rev. A 18 HMMU000882 04/09/04 3.4 GETTING OPTIMAL PICTURE Step 1: Window’s background or “H” ch aracter should be di splayed on your screen. Step 2: Adjust the screen to the center of the Display (LCD) by using the top and bottom display contro ls and the V-Position Adjust menu.
Rev. A vi HMMU000882 04/09/04 SAFEGUARDS, CONTINUED ENVIRONMENT/INSTAL LATION WA RNINGS 2. Do not place candlelight, mosquito coils, or cigarettes on top of the monitor or install it close to heatin g appliances. Doing so may damage the product or create a fire danger.
Rev. A 16 HMMU000882 04/09/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED OSD Menu Description Horizontal position Select OSD MENU horizontal position. Vertical position Select OSD MENU vertical position. Timeout Time after which OSD MENU leaves screen.
Rev. A viii HMMU000882 04/09/04 PURCHASE INFORMATION Date Purchased: Serial Number: Location Installed: Rev. A 15 HMMU000882 04/09/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE, CONTINUED OSD Menu Description The following table describe s the OSD menu and a description of each option.
Rev. A 14 HMMU000882 04/09/04 3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE Image and sound can easily be adjusted through an OSD menu. 4 AUTO / EX IT Used to exi t OSD. 3 MENU / SEL Used to start the OSD and select options. 2 CH Z Menu move/adjus t buttons.
Rev. A x HMMU000882 04/09/04 TABLE OF CONTENTS, CONTINUED SECTION 4: TROUBLESHOOTING AND MAINTENANCE .... 19 4.1 TROUBLESH OOTING ................................................... 19 No Power .........................................................
Rev. A 12 HMMU000882 04/09/04 3.2 PRESET MODE CHART Timing Charts The monitor shall be capa ble of supporting the following video timings: VI DE O SYNC Sy nch Wi dth (T 2) (T3 ) Ba ck Po ac h (T1) Period (T4) Ac tive (T5) Front Poach Input Timing Limits H-Sync Pulse Width 1.
Rev. A 2 HMMU000882 04/09/04 Some computer systems are not comp atible with the DDC standard. If your monitor is displaying the wrong resolution, che ck your computer system for a DDC comp atible video card and contact the Service Center. Do not open the monitor.
Rev. A 10 HMMU000882 04/09/04 NOTES: Rev. A 3 HMMU000882 04/09/04 1.3 CONTENTS OF PACKAGE LCD Monitor User Manual VGA Cable U S E R M A N U A L Sound Cable AC/DC Adapter Installation Disk Power Cord V.
Rev. A 4 HMMU000882 04/09/04 NOTES: Rev. A 9 HMMU000882 04/09/04 2.6 DISPLAY MODES MEMORY The microcontroller has memory ca pacity to store 27 different display modes including timing formats and di splay settings. This memory capacity is divided into two parts : user setting area and factory presetting area.
Rev. A 8 HMMU000882 04/09/04 2.5 MICROCONTROLLER FEATURES The microcontroller automatica lly detects the video board installed in your system. When the monitor is turned on, the microcontroller first checks the display mode memory stored in the user setting area and the factory presetting area.
Rev. A 6 HMMU000882 04/09/04 2.2 CONTROLS – REAR PANEL PC A B CD E F G DVR or VCR A DC12V B Ear C PC Sound D VGA E Video Sound F S-VHS G Composite AV1 Rev. A 7 HMMU000882 04/09/04 2.3 INSTALLING THE MONITOR DRIVER You can achieve an optim al resolution and scanning rate by installing the monitor driver as follo ws: 1.
An important point after buying a device Honeywell HMLCD19 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HMLCD19 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HMLCD19 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HMLCD19 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HMLCD19 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HMLCD19, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HMLCD19.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HMLCD19. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HMLCD19 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
