Instruction/ maintenance manual of the product 10 Hobart Welding Products
Go to page of 4
PROCESSES Stick (SMAW) Welding Champion 10,000 All-in-One 10,000-W att AC Generator and DC Welder 211801 June 2008 C ombining a 10,000-watt generator with a 230-amp constant-current DC welder, the Champion 10,000 is ideal for farm, general construction, and emergency power applica tions.
2 CONTROL PANEL MOUNTING SPECIFICATIONS 1. Engine Control Switch allows for engine speed selection. In Run/Idle position, engine runs at idle speed at no load, and weld/power speed under load. 2. Engine Choke Control. Use control to change engine air/fuel mix.
3 ACCESSORIES CC-1 Series Weather Cover #195 198 Attractive, water-resistant nylon cover resists stains and mildew and protects the finish of your welder. No. 2 Stick Cable Set, 50 ft #195 195 Consists of 50 ft (15.2 m) No. 2 elec trode cable and holder, and 50 ft (15.
Litho in USA DISTRIBUTED BY: Equipment and Options Stock No. Description Qty. Price Champion 10,000 #500 433 With Subaru/Robin engine #500 434 With Kohler engine With Subaru/Robin engine UPC: #7159592.
An important point after buying a device Hobart Welding Products 10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart Welding Products 10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart Welding Products 10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart Welding Products 10 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart Welding Products 10 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart Welding Products 10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart Welding Products 10.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart Welding Products 10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart Welding Products 10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
