Instruction/ maintenance manual of the product ML-136819 Hobart
Go to page of 24
INSTALLATION & OPERATIONAL MANUAL 1HFD & HFC SERIES ELECTRIC FRYERS With KleenScreen PLUS ® Filtration Systems MODELS: 1HF50D ML-136500 1HF85CF ML-136819 1HF85CF Shown - Computer Control ENERGY STAR® Qualified For additional information on Hobart or to locate an authorized parts and service provider in your area, visit our website at www.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -2- IMPORTANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL ELECTRIC EQUIPMENT, WHO SHOULD PER FORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -3- TABLE OF CONTENTS IMPORTANT FOR YOUR SAFETY……………………………… ……….
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -4- INTRODUCTION GENERAL Hobart Fryers are produced wit h quality workmanship and mate rial. Proper installation, usage and maintenance will result in year s of satisfactory performance.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -5- Do not use the door or its handle to lift the fryer. MODEL - GMO Kw per Fry Tank Width Inch (cm) Total System Shortening lbs. (kg) Each Fry Tank 1HF50D 17 15.5" (39) 50 (23) 1HF85CF 24 21.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -6- CODES AND STANDARDS The fryer must be instal led in accordance with: In the United States: State and local codes, or in the absence of local codes, with: National Electrical Code, ANSI/NFPA-70 (latest edition).
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -7- Australia, use only the caster suppl ied by the manufactu rer for the fryer device. The fryer must be installed usi ng a hose assembly restraining device to limit the movement of the appli ance in accordance with AS1869.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -8- LEVELING THE FRYER Check the level of the fryer by placing a level on top of the fr yer after electrical connections have been made. Ensure that the fryer is level front-to-back and side-to-side in the final installed position.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -9- Wipe tank completely dry with a soft, clean cloth. FILLING TANK WITH SHORTENING Close the drain valve. Fill the fryer tank with shortening. Hobart recommends using liquid shortening.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -10- Batter covered foods should be dropped carefully , one by one, into shortening or basket. If you use the basket, first dip the basket into the shortening to reduce batter-build up on basket surfaces.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -11- Programming the Solid State Control.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -12- Programming the Computer Control.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -13- TURNING OFF THE FRYER Open the door to the fryer. Press t he power switch to the OFF position. EXTENDED SHUTDOWN 1. Open the door to the fryer. Press the power switch to the OFF position.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -14- DRAINING THE TANK 1. Open the door to the fryer. The power must remain ON for the fryer to filter correctly. 2. Insert the drain extension into t he drain valve. Tighten only hand tight.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -15- 9. Drain the tank according to DRAINING TH E TANK. Rinse thoroughly with clear, hot water. All traces of cleaner must be removed. Dry the tank thoroughly. 10. Close the drain valve and add shorteni ng.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -16- KleenScreen Plus ® Filtration System Installation and Operational Manual for “HFF” Models 1HF85CF Shown Electric KleenScr.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -17- Filtering Instructions for KleenScreen PLUS ® Fryers General The KleenScreen PLUS ® filtration system filters the oil as it is pumped back into its’ respective tank(s). Only one tank can be drained and filter ed at a time.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -18- Fully assembled filter screen assembly: F i g . 2 Secure Tube with Suction Tube Clip Filter Screen Lays Flat On Bottom of Filter Pan Fig.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -19- INSTRUCTIONS TO REMOVE & REPLACE KLEENSCREE N PLUS ® FILTER ENVELOPE FOR ABSOLUTE FILTRATION & MAXIMUM FLOW RATE WE RECOMME ND YOU CHANGE YOUR FI LTER ENVELOPES AT EVERY OIL CHANGE (10-14 DAYS DEPENDING ON OIL USAGE).
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -20- Operation Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the fryer. Spilling hot frying compound can cause severe burns. Do not move fryer wi thout draining all frying compound from the tank.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -21- Filtering Instructions for KleenScreen PLUS ® Fryers with Computer Controls.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -22- FILTERING TIP: Open the filtering drawer approximately 1” to allow any oil in the re turn line to run back into the filter pan. This will take about 30 seconds to complete. Then open the drawer completely to clean filter components.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -23- BOIL OUT PROCEDURE: Use the Boil Out By-Pass™ drai n extension allowing the boil out solution to exit the fry t ank without using the filtering system. Do not allow water to run through the motor / pump.
HFD, HFCF SERIES ELECTRIC FRYER HOBARTCORP F-32964 Rev. C (May 2012) -24- MAINTENANCE Hot oil and hot parts can cause burns. Use care when operating, cleani ng, and servicing the fry er. Spilling hot fryer com pound can cause severe burns. Do not move fryer without draining all frying com pound from the tank.
An important point after buying a device Hobart ML-136819 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-136819 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-136819 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-136819 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-136819 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-136819, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-136819.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-136819. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-136819 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
