Instruction/ maintenance manual of the product ML-136145 Hobart
Go to page of 12
N S T R U C T I O N S I 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 35219 (Oct. 2007) MODEL 3813 & 3913 SLICERS MODELS 3813 Manual Slicer ML-136135 3913 Automati.
– 2 – © HOBART CORPORATION 2007 TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . .
– 3 – Installation, Operation and Care of MODEL 3813 & 3913 SLICERS SA VE THESE INSTRUCTIONS GENERAL The model 3813 and 3913 slicers are equipped with a 1 ⁄ 2 HP motor and are available for single-phase electrical service. The slicer features the Hobart CleanCut TM 13" diameter contoured stainless steel knife.
– 4 – INST ALLA TION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
– 5 – ELECTRICAL This machine is provided with a three-prong grounding plug. The outlet to which this plug is connected must be properly grounded. If the receptacle is not the proper grounding type, contact an electrician.
– 6 – TOP KNIFE COVER LA TCH KNOB PRODUCT TRA Y MEA T GRIP INDEX KNOB PRODUCT TRA Y HANDLE MEA T GRIP SLOT GAUGE PLA TE MEA T GRIP SLIDE ROD P ARK PIN CARRIAGE SLOT CONTROLS SIDE P ANEL OPERA TION Rotating knife. Use meat grip. Unplug machine power cord before cleaning, servicing or removing parts.
– 7 – SLICING — MODEL 3913 • Close the G AUGE P LATE by turning the I NDEX K NOB fully clockwise (Fig. 7). • Pull the P RODUCT T RAY (Fig. 7) all the way toward you until it reaches its stop (this is the home position). • Raise the M EAT G RIP to the top of the P RODUCT T RAY , and rest the P ARK P IN on the M EAT G RIP S LOT .
– 8 – CLEANING This machine must be thoroughly cleaned and sanitized at least as often as required by local regulation or after being idle for an extended period of time. The slicer knife is very sharp. Exercise extreme caution when working near the knife.
– 9 – Clean completely around the R ING G UARD by working a moistened, folded paper towel between the R ING G UARD and the K NIFE (Fig. 15). Wash, rinse and sanitize both sides of the K NIFE by wiping outward from the center. Never clean any part of the slicer with steel pads.
– 10 – Fig. 19 Fig. 21 RIDGE ON KNIFE HUB (PLASTIC COVER REMOVED) PIN @ 1 O ’ CLOCK HOLE @ 11 O ’ CLOCK KNIFE REMOV AL TOOL PIN IN HOLE @ 11 O ’ CLOCK SLOTS AROUND 3 PINS Using the Knife Removal Tool Accessory Unplug the machine power cord and turn the index knob fully clockwise to close the gauge plate before cleaning the slicer.
– 11 – To Reinstall the Knife . . . • Orient the R IDGE on the K NIFE H UB so it points to the P IN on the R ING G UARD at the 1 o'clock position (Fig. 24). • Place the K NIFE and T OOL so the P IN on the K NIFE R EMOVAL T OOL is at the 11 o'clock position (Fig.
– 12 – FORM 35219 (Oct. 2007) MAINTENANCE Unplug the machine power cord and turn the index knob fully clockwise to close the gauge plate before doing any maintenance on the slicer. KNIFE SHARPENING The CleanCut TM K NIFE will provide long service in normal food retail or commercial kitchen use.
An important point after buying a device Hobart ML-136145 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-136145 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-136145 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-136145 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-136145 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-136145, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-136145.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-136145. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-136145 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
