Instruction/ maintenance manual of the product ML - 104443 Hobart
Go to page of 4
EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 KNIFE SHARPENER MODEL BE1 ML - 104443 FORM 18843 Rev. A (4-94) MODEL BE1.
– 2 – © HOBART CORPORATION, 1994 Installation, Operation, and Care of MODEL BE1 KNIFE SHARPENER SA VE THESE INSTRUCTIONS GENERAL The BE1 Knife Sharpener allows you to put a B ETTER E DGE on flat-bladed knives by applying the blade edge against a grit-bearing belt moving at the optimum speed.
– 3 – Unloader Wheels PL-40084-1 Guide Plate PL-40083-1 Unloader Wheel Bottom Spring Tensioner Sharpening Belt Tension Spring Drive Wheels SHARPENING KNIVES Clean and dry knife before sharpening. Turn sharpener on. Insert the knife in the sharpening area with the handle next to the housing.
– 4 – FORM 18843 Rev. A (4-94) PRINTED IN U.S.A. KNIFE SHARPENER UNIT ILLUS. PART PL-51462 NO. NAME OF PART AMT. 1 438336 Fastener - Drive ............................................................................................................
An important point after buying a device Hobart ML - 104443 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML - 104443 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML - 104443 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML - 104443 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML - 104443 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML - 104443, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML - 104443.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML - 104443. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML - 104443 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
