Instruction/ maintenance manual of the product HHFC8 Hobart
Go to page of 16
FORM 33798 Rev. A (Sept. 2001) HHFC SERIES DELI DISPLA Y CASES MODEL HHFC4 ML-114911 High Profile (57 3 ⁄ 8 " High) ML-114917 Low Profile (48 1 ⁄ 2 " High) ML-126809 Two Tier ML-126810 P.
– 2 – © HOBART CORPORATION, 1997, 2001 Euro Base High or Low Profile 4, 5, 6 or 8 Foot Full Service or Self-Service Pedestal Base 4, 6 or 8 Foot Full Service or Self-Service Countertop Model 4, 5.
– 3 – Two Tier 4, 6 or 8 Foot Self-Service Designer Base 4, 6 or 8 Foot Full Service or Self-Service Island Case 4 Foot Self-Service.
– 4 – Installation, Operation and Care of HHFC SERIES DELI DISPLA Y CASES SA VE THESE INSTRUCTIONS GENERAL The HHFC Series Deli Display Cases hold food products at regulated temperatures, maintaining both freshness and quality. The deli cases feature uniform heating.
– 5 – INSTALLATION CODES AND STANDARDS In the United States, Hobart HHFC Series Deli Display Cases must be installed in accordance with state and local codes and the National Electrical Code, ANSI/NFPA-70 (latest edition).
– 6 – Fig. 1 1. Lift the front glass into the upright position. 2. Remove the operator side service doors. 3. Place the stainless steel well adapter insert into the deli case well on the side (left or right) that is provided with the two-foot wide short piece of front glass.
– 7 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
– 8 – CONTROLS — All Models with Overhead Radiant Heat Lamp Bulbs, Euro, Counter, Designer, Two Tier or Pedestal Models, Full Service or Self-Service, Model HHFC4 (Case Length: 4 Foot), Model HH.
– 9 – HIGH MED LOW OFF OVERHEAD HEA TER WELL THERMOST A T WELL INDICA TOR LIGHT OFF 10 9 8 7 6 5 4 3 2 1 FUSE HOLDER MAIN (ON/OFF) OVERHEAD LIGHTS ON/OFF PL-53651 ZONE CONTROL CONTROLS — Counter.
– 10 – OFF OVERHEAD HEA TER WELL THERMOST A T OFF 10 9 8 7 6 5 4 3 2 1 WELL INDICA TOR LIGHT MAIN (ON/OFF) OVERHEAD LIGHTS ON/OFF FUSE HOLDER PL-53653 ZONE CONTROL Fuse Holder — Replace fuse with same size and type. Overhead Heater — Regulates the heating elements to Low, Medium or High settings.
– 11 – OFF HIGH LOW OVERHEAD HEA TER WELL THERMOST A T OFF 10 9 8 7 6 5 4 3 2 1 WELL INDICA TOR LIGHT MAIN (ON/OFF) OVERHEAD LIGHTS ON/OFF FUSE HOLDER WELL THERMOST A T OFF 10 9 8 7 6 5 4 3 2 1 WE.
– 12 – HIGH MED LOW OFF OVERHEAD HEA TER WELLS THERMOST A T WELLS INDICA TOR LIGHT OFF 10 9 8 7 6 5 4 3 2 1 FUSE HOLDER MAIN (ON/OFF) OVERHEAD LIGHTS ON/OFF PL-53650 CONTROLS — Designer or Two T.
– 13 – CENTER WELLS THERMOST A T WELLS INDICA TOR LIGHT OFF 10 9 8 7 6 5 4 3 2 1 END WELLS THERMOST A T WELLS INDICA TOR LIGHT OFF 10 9 8 7 6 5 4 3 2 1 FUSE HOLDER MAIN (ON/OFF) OVERHEAD LIGHTS ON.
– 14 – CONTROLS — Designer or Two Tier, Model HHFC8 (Case Length: 8 Foot), with Overhead Heater and Halogen Lighting One thermostat control (with heating indicator light) adjusts the heaters for.
– 15 – BEFORE FIRST USE Before using the deli case for the first time, thoroughly clean the deli case with warm soapy water. Rinse thoroughly and wipe dry with a soft clean cloth.
– 16 – MAINTENANCE WARNING : THE DELI CASE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE DELI CASE. WARNING : DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT BEFORE PERFORMING ANY MAINTENANCE.
An important point after buying a device Hobart HHFC8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HHFC8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HHFC8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HHFC8 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HHFC8 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HHFC8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HHFC8.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HHFC8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HHFC8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
