Instruction/ maintenance manual of the product 6614 ML-134050 Hobart
Go to page of 12
N S T R U C T I O N S I FORM 34527 Rev. A (Sept. 2001) MODEL 6614 MEA T SA W MODEL 6614 ML-134096 Previous models covered by this manual: 6614 ML-134050 701 S.
–2– Installation, Operation, and Care of MODEL 6614 MEA T SA W SA VE THESE INSTRUCTIONS GENERAL The 6614 Meat Saw is rugged, durable, and easy to clean. The saw is equipped with a water resistant 3 HP electric motor and direct gear drive transmission that provides a blade speed of 3500 feet per minute.
–3– INST ALLA TION UNPACKING AND ASSEMBLY Immediately after unpacking the meat saw, check for possible shipping damage. If the meat saw is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
– 4 – UPPER PULLEY COVER (Stainless Steel) The stainless steel upper pulley cover (Fig. 5) should be installed on the two hinge pins of the stainless steel upper pulley baffle and securely latched during saw use.
– 5 – LOWER PULLEY The lower pulley is assembled on the lower pulley shaft. The latch on the lower pulley should be seated in the groove of the pulley shaft (Fig. 7). The lower pulley can be removed after the blade has first been loosened and removed and the lower pulley latch is moved out of the groove of the lower pulley shaft.
– 6 – SCRAP TRAY During use, the scrap tray should be installed between the left-hand table and the carriage support (Fig. 9). The scrap tray slides into place, resting on the frame between the carriage support and table. The angled side of the scrap tray is located nearest the blade.
– 7 – PL-40838-1 LOWER GUIDE HOLDER LOWER BLADE GUIDE ASSEMBL Y LOWER BLADE GUIDE The lower blade guide assembly fits in the lower guide holder (Fig.
– 8 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THE CIRCUIT IS BEING WORKED ON.
– 9 – OPERA TION SAFETY DEVICES INCORPORATED IN THIS SAW MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SAW IS IN USE. SAFETY FEATURES Upper Guide and Guard Assembly Before turning the s.
– 10 – GAUGE PLATE When making several cuts of the same thickness (or when using the pusher plate), set the gauge plate as desired (Fig. 14) by pushing the lock lever and sliding the gauge plate to the thickness you want. A reference scale on the table indicates the thickness of cut.
– 11 – CLEANING AND SANITIZING WARNING : DISCONNECT ELECTRICAL POWER AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THE CIRCUIT IS BEING WORKED ON BEFORE CLEANING THIS MACHINE.
– 12 – MAINTENANCE WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THE CIRCUIT IS BEING WORKED ON. LUBRICATION The motor has permanently lubricated ball bearings and requires no additional lubrication.
An important point after buying a device Hobart 6614 ML-134050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 6614 ML-134050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 6614 ML-134050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 6614 ML-134050 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 6614 ML-134050 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 6614 ML-134050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 6614 ML-134050.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 6614 ML-134050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 6614 ML-134050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
