Instruction/ maintenance manual of the product 610 Hobart
Go to page of 4
MODEL 610 SLICER MODEL 610 ML-38388 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34569 (Jan. 2001).
– 2 – Installation, Operation, and Care of MODEL 610 SLICER SA VE THESE INSTRUCTIONS GENERAL The model 610 slicer is compact, convenient, and easy to use. The finish is polished anodized aluminum and the slicer is designed to be easy to clean. The 1 ⁄ 5 HP motor delivers acceptable performance in kitchens or food stores.
– 3 – SLICING Pull the carriage (Fig. 2) toward you until it stops and place the product to be sliced on the carriage tray. Set the meat grip against the product and turn on the slicer by pressing the on-off switch (Fig. 2). Adjust the slice thickness by turning the index knob.
– 4 – FORM 34569 (Jan. 2001) Printed in U.S.A. PL-41518-1 KNIFE SHARPENER MAINTENANCE KNIFE SHARPENING Your slicer knife will provide long service in normal deli, food store, or commercial kitchen use.
An important point after buying a device Hobart 610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 610 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 610 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 610.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
