Instruction/ maintenance manual of the product 2912PS ML-104833 Hobart
Go to page of 12
N S T R U C T I O N S I 2912PS SLICER MODEL 2912PS AUT OMA TIC SLICER . . . with Portion Scale MODEL 2912PS ML-104966 Previous models covered by this manual: 2912PS ML-104833 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34456 (Feb.
– 2 – © HOBART CORPORATION, 1999 Model 2912PS Slicer.
– 3 – Installation, Operation, and Care of Model 2912PS Automatic Slicer with Portion Scale SA VE THESE INSTRUCTIONS GENERAL The model 2912PS Automatic Slicer with Portion Scale can display the weight or slice count as the sliced product falls to the platter.
– 4 – PL-41414-1 SHARPENER DEFLECT OR T OP KNIFE COVER CARRIAGE TRA Y CARRIAGE TRA Y / SUPPORT ARM FENCE INST ALLA TION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
– 5 – Fig. 2 OPERA TION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE. The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable.
– 6 – KEYPAD — Selects the Mode: W EIGH , W EIGH + P RESET , C OUNT , C OUNT + P RESET . + — Selects LB as the unit of measure for Weigh mode (kg for metric).
– 7 – PRESET VALUES — U.S. WEIGHT UNITS Six preset values for each weigh mode and slice count are available. The preset values provided at the factory for U.S. weight units are shown in the table below. Other values can be programmed in place of these values by following the Programming instructions in the next section.
– 8 – KEYBOARD AND DISPLAY ACTIVATION Manual Mode — With the Lever on Manual (pointing down) the keyboard display and the slicer knife motor are either both on or both off. The display and slicer knife motor will go off if the Switch Knob is pushed or if the AutoShutoff feature (when enabled) senses inactivity for a 10 second interval.
– 9 – SLICING — MODEL 2912PS With the Gauge Plate fully closed, pull the Carriage all the way toward you until it reaches its stop. With the Meat Grip out of the way, place the product to be sliced on the Carriage Tray.
– 10 – PL-41403-1 GA UGE PLA TE KNIFE RING GU ARD P APER TO WEL PL-41402-1 GA UGE PLA TE KNIFE SHARPENER LOCK LEVER PL-41416-1 LA TCH KNOB T OP KNIFE COVER CARRIAGE TRA Y / SUPPORT ARM CARRIAGE TR.
– 11 – Do not exceed chemical manufacturer’s recommended concentrations for detergent or sanitizer. Do not exceed 200 parts per million concentration of available chlorine. For example, mixing 1 tablespoon of 5.25% sodium hypochlorite bleach with 1 gallon of water yields a solution containing 200 ppm of available chlorine.
– 12 – FORM 34456 (Feb. 2000) PRINTED IN U.S.A. T OP KNIFE COVER IS REMO VED PL-41404-1 T O SHARPEN: PULL SHARPENER HANDLE FULL Y FORW ARD FOR 5 SECONDS MAINTENANCE KNIFE SHARPENING The Hobart cast stainless steel knife will provide long service in normal food retail or commercial kitchen use.
An important point after buying a device Hobart 2912PS ML-104833 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 2912PS ML-104833 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 2912PS ML-104833 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 2912PS ML-104833 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 2912PS ML-104833 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 2912PS ML-104833, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 2912PS ML-104833.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 2912PS ML-104833. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 2912PS ML-104833 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
