Instruction/ maintenance manual of the product 2812PS Hobart
Go to page of 16
N S T R U C T I O N S I 2812PS SLICER MODEL 2812PS SLICER . . . with Portion Scale MODEL 2 8 1 2 P S ML-104960 Previous models covered by this manual: 2812PS ML-104624 ML-104825 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34455 (Feb.
– 2 – T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 UNPACKING . .
– 3 – Installation, Operation, and Care of Model 2812PS Slicer with Portion Scale SA VE THESE INSTRUCTIONS GENERAL The Hobart Model 2812PS Slicer with Portion Scale displays the weight or slice count as the sliced product falls to the platter.
– 4 – INST ALLA TION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
– 5 – OPERA TION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE. The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable.
– 6 – 12 3 4 R n PRESETS The four Preset keys (1 – 4) recall the last-entered portion mode and value and display the preset indicator ( P1 , P2 , P3 , or P4 ). In WEIGHT mode, the slicer beeps when the preset weight is on the platter. In SLICE mode, the slicer beeps when the preset number of slices has counted down to 0 .
– 7 – POWER UP When the slicer is plugged in, the control checks its own circuitry, goes through a series of illuminated displays, and ends with the scale at zero in weight mode. SCALE PLATFORM AND PLATTER ASSEMBLY Proper assembly of the nylon scale platform and stainless steel scale platter is necessary before weighing.
– 8 – WEIGHT MODE The scale is ready to weigh if the zero indicator is displayed when the platter is empty. Tare is permitted. Once invoked, the Tare value is set for all WEIGHT mode operations: Manual mode, Presets (P1 – P4), and Memory (M). The Tare value can be changed or turned off at any time.
– 9 – SLICING IN MANUAL MODE . . . without using the Presets (P1 – P4) or the Memory key In Weight Mode . . . Set the Tare, if needed. Set thickness. Slice product. The displayed weight will reflect the platter weight (less Tare, if NET was displayed).
– 10 – USING THE PRESETS: P1, P2, P3, P4 Press any Preset key — the last-saved values will be called up. For example, let's press the [ 1 ] Preset key and assume that the factory settings have not been changed. In Weight Mode . . . The preset weight, 0.
– 11 – USING THE MEMORY KEY: In Weight Mode . . . You can enter the preset weight by using the numeric keys (for example, 125). The lb indicator will blink and the preset weight, 1.25 lb, displays. [ If you make a mistake, press the Clear key, CE , and reenter the numeric value, or press the CE key twice to restore the previous values.
– 12 – CLEANING This machine must be thoroughly cleaned and sanitized after each day’s operation or after being idle for an extended period of time.
– 13 – Do not exceed chemical manufacturer's recommended concentrations for detergent or sanitizer. Do not exceed 200 parts per million concentration of available chlorine. For example, mixing 1 tablespoon of 5.25% sodium hypochlorite bleach with 1 gallon of water yields a solution containing 200 ppm of available chlorine.
– 14 – MAINTENANCE KNIFE SHARPENING The Hobart cast stainless steel knife will provide long service in normal food retail or commercial kitchen use. However, in high volume applications where it is a practice to sharpen the knife frequently or even daily, the knife will be expended in a shorter time.
– 15 – NOTES:.
– 16 – FORM 34455 (Feb. 2000) PRINTED IN U.S.A. NOTES:.
An important point after buying a device Hobart 2812PS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 2812PS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 2812PS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 2812PS you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 2812PS will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 2812PS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 2812PS.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 2812PS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 2812PS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
