Instruction/ maintenance manual of the product CDR-8130 Hitachi
Go to page of 13
1 INSTRUCTION MANUAL CD-ROM DRIVE MODEL CDR-8130 IMPORTANT - Read all of these instructions carefully and understand them before using your CD-ROM drive. - Keep this instruction manual for future reference. - If this CD-ROM drive changes ownership, be sure this manual accompanies the CD-ROM drive.
2 For USA Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 CAUTION INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. VORSICHT UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
4 IMPORTANT SAFEGUARDS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR EQUIPMENT READ ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS FOR LATER USE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT. PRECAUTIONS FOR SAFETY Power source -This CD-ROM Drive should be operated from the type of power source indicated on the marked label.
5 - In a place where an operation temperature reaches beyond the specified temperature 40C - High humidity locations - In a location subject to extreme changes of temperature and humidity - In a room where dust density higher than 0.
6 CONTROLS AND FUNCTIONS Rear Panel Front Panel (3) (6) (5) (4) (2) (1) (9) 39 40 1 2 (8) (7) (10) (1) LOADING/UNLOADING/BUSY Indicator Indicator blinks green only when the Disc Tray is being opened or closed, or when the CD-ROM drive is accessing data.
7 1 2 4 6 3 5 Circuit Board OR (Default setting) Device is Master Device is Slave Cable Select (9) ATAPI Interface Connector ATAPI bus connection (40 pin) (10) Power Supply Connector (DC Input) For connecting the power supply cable.
8 Install the CD-ROM Drive following general installation procedure shown below. 1. Check the Device Configuration Jumper settings of the CD-ROM Drive such as Master, Slave, CSEL. (See page 6) 2. Turn off the host computer and unplug the power supply cable of the host computer.
9 Disc label side Push Disc Tray 120 mm Disc Disc label side Push Disc Tray 80 mm Disc IMPORTANT - Do not press the OPEN/CLOSE button while the host computer is accessing the disc. It may caused an error. - When not using the CD-ROM Drive, keep the Disc Tray closed.
10 A commercially available "Laser Lens Cleaning Disc" may be used to clean up the pick-up lens of the CD-ROM Drive. Use the Compact Disc Laser Lens Cleaner LLC-1. (by AUDIO SOURCE in U.S.A., by AKUSTIK SISTEME VERTRIEBS GHBH in GERMANY and by SAEC COMMERCE CO.
11 Symptoms Possible causes Remedy The CD-ROM Drive does not operate even when a disc is loaded. 1.You place the disc up-side down in the Disc Tray. 2. The disc is dirty. 3. The pick-up lens is dirty. 4.The disc is scratched or warped. 5.Cable connection is incorrect.
12 SPECIFICATIONS GENERAL Power Requirements DC Voltage +12V ±10% 1.0A +5V ±5% 0.7A Ripple +12V 300 mVpp (maximum) +5V 150 mVpp (maximum) Dimensions ( W x H x D ) 146 x 41.
13.
An important point after buying a device Hitachi CDR-8130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi CDR-8130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi CDR-8130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi CDR-8130 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi CDR-8130 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi CDR-8130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi CDR-8130.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi CDR-8130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi CDR-8130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
