Instruction/ maintenance manual of the product Mug Heat Press Kit Hi-Touch Imaging Technologies
Go to page of 24
HiT i Photo Printer Mug Heat Press Kit User Manual.
ACKNOWLEDGEMENTS Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsof t Corporations. Pentium is a U.S. registered tr ademark of Intel Corporation. T rueT ype is a U.S. trademark of Apple Computer , Inc. Adobe and Acrobat a registered trademar ks of Adobe Systems Incorporated.
SAFETY INSTRUCTIONS 1. Read thes e instructions carefully . Save these instructions for future reference. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall out let before cleaning. Do not use liquid cleaners or aerosol cleaners.
installation. If these equipment doses cause harmful interference to radio or television reception, which can be determi ned by interference by on or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver .
.
.
Chapter 1. W elcome 1-1 Our Invit ation to HiT i Photo Printer Family It is our pleasure to have you onboard as the member of HiT i Photo Printer family . W e thank you for your patronage and hope this is just the beginning of our long-term ssociation.
2-2 Other Features Professional Locating coil design ,accurate for locating.Dual temperature sensor and plastic cover design, secure and accurate for useAutomatic power-off design while abnormal a.
Chapter 2 MugDesiree Introduction 2-1. Mug Desiree Installation: T o I n s t a l l : 1. Insert MugDesiree CD into CD-ROM 2. If CD-ROM does not auto start, please click S tart/Run and type D:SETUP .EXE (where “D” is your CD-ROM drive.) 3. Click OK.
2-2. Operation Procedure 1. Select S tartProgram esHiT iHiT iHitiMug M ugDesiree or double-click to run MugDesiree 2. Press button and import the images from computer 3. Press button and import images from HiT i printer 4. Press button and import templates from computer .
（ a ） 99mm x 74mm （ b ） 120mm x 74mm （ c ） 51.5mm x 74mm Or you can edit your own layout format as in illustration (d) (d) 8. After picking desire print layout, press button to import the image/templates into designated picturing area.
—Text layer 10. Use , , and buttons to adjust the size of the image /template within picturing area. Fits the image /template vertically to the height. Fits the image /template horizont ally to the width. Prompts an image/template size window for user to custom defines width, length, and pixel.
---Portrait, this will enhance the imprinted people image on the mug. ---Landscape, this will increase the color saturation imprinted on the mug. ---Artistic, this will double the color saturation imprinted on the mug. "Artisitc' effect is good if image is text or logo.
Chapter 3 Mug Heat Press S t andard Operation Procedure 1. Y ou should have the following tool s in hand: Mug Heat Press, Bubble Eliminator , White Ceramic Mug, Mug Locating T ape, Dye Sublimation Photograph, Mug Locating Coil, Clean T o wel (recommend polyester fabric),a pair of gloves and a bottle of methane, 2.
Useful T ip s: (1). Carefully cutting off excessive margin on top of photography (2). Place mug inside lo cating coil.The bottom of the mug should be in p arallel with locating coil (3). Left and right side of photograph should be in p arallel with the edge of locating coil (4).
Useful T ip s: (1). Ensure no gap between photography and mug while using bubble eliminator to squeeze out air pocket (2). T ape the mug when bubble eliminator (3). Use finger to press the wrinkle while wrinkle appears during air pocket removing. 8. Use mug locating tape to secure anot her side of the photo onto the mug’ s surface.
11. Flip down the plastic cover 12. Select <RUN> and press OK, an the default setting would be applied for the heating process (the default pre-heat ing time/temperature is 1 min/ 130 o C and th.
14. Push the adjustor to tight on the mug against the plastic roller . With hand holding the mug holder , rotate the mug counter-clockwise and clockwise to squeeze any air between the mug and the photo. Useful T ip s: (1). S t art to bubble elimination process immediately after pre-heating process in order to have the best result (2).
18. W ait until the temperature of m ug cools down, then remove the mug locating tape. Useful T ip s: (1). Peel the photo off immediately while heating completed, can get ultimate output. (2). A void burning from touching, please wear glove. (3). A void double-image, don’t stick the photo on the mug again.
Chapter 4 Consumable Replacement 4-1 Heater Plate Replacement 1 T urn off the power and wait for 20 minutes for machine to cool down 2 T ake out the white teflon and black rubber 3. Pull the heater plate fr om machine, you will see a semi- sphere hole where a wire is connecting with heater plate.
5. Make sure the wire and the new heater plate is properly reconnected. 6. Put the connector through the semi -sphere hole and put the heater plate into the original location. Then put the black rubber and white T eflon onto the machine. Make sure the heater plate , bla ck rubber and white silicon are wrapped by white T eflon.
4-2. Teflon Replacement // The white T eflon on the surface of the heat er plate is used for improving the image transferring ef fect onto the mug. If you f i nd any cracks on t he surf ace of the T eflon, please contact your local distributor and replace the T eflon according to the following procedure.
Cover the w hite, orange and b lack com ponents. 5. Insert the T eflon into the embr acer as the following illustration. Push it 6. The new T eflon replacement is completed.
Chapter 5 Useful tip s for Mug Heat Machine Maintenance Erros Message displays on LCD Action T aken COVER OPEN Flip down the plastic cover and press OK OVER HEAT Press OK and turn off the power first and then turn it back on ADC FAILS 1. T urn off the power first and then turn it back on 2.
An important point after buying a device Hi-Touch Imaging Technologies Mug Heat Press Kit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hi-Touch Imaging Technologies Mug Heat Press Kit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hi-Touch Imaging Technologies Mug Heat Press Kit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hi-Touch Imaging Technologies Mug Heat Press Kit you will learn all the available features of the product, as well as information on its operation. The information that you get Hi-Touch Imaging Technologies Mug Heat Press Kit will certainly help you make a decision on the purchase.
If you already are a holder of Hi-Touch Imaging Technologies Mug Heat Press Kit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hi-Touch Imaging Technologies Mug Heat Press Kit.
However, one of the most important roles played by the user manual is to help in solving problems with Hi-Touch Imaging Technologies Mug Heat Press Kit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hi-Touch Imaging Technologies Mug Heat Press Kit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
