Instruction/ maintenance manual of the product BM-110 Henny Penny
Go to page of 2
Model BM- 110 OPERA TING INSTRUCTIONS 1. Turn power switch to the ON position. 2. Place breading into drum. Drum will hold up to 10 pounds of breading. 3. Feed raw moist product into hopper assembl y. 4. Product will emerge from the other end of drum.
Model BM- 110 To avoid electrical shock or property damage, move the power switch to OFF and disconnect main circuit breake r , or unplug cord at wall receptacle. POWER SWITCH 1. Remove screws holding base cover to unit and remove. 2. Remove the switch mounting nut, locknut, and the ON/OFF plate, and remove the switch.
An important point after buying a device Henny Penny BM-110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny BM-110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny BM-110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny BM-110 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny BM-110 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny BM-110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny BM-110.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny BM-110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny BM-110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
