Instruction/ maintenance manual of the product SL-5412 Heath Zenith
Go to page of 8
OPERA TION © 2003 DESA Specialty Products™ 595-5767-02 * resets to Auto Mode at dawn. MANUAL MODE ON-TIME 10 5 1 TEST 10 5 1 TEST ON-TIME TEST ... back on.
2 595-5767-02 INST ALLA TION For easy installation, select an existing light with a wall switch for replacement. W IRE THE L IGHT C ONTR OL . ❒ Turn power off at the fuse or circuit breaker. ❒ Remove the existing light fixture. ❒ Install the mounting strap as shown using two screws that fit your junction box.
3 595-5767-02 Motion Motion TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. Least Sensitive Most Sensitive Sensor The detector is most sensitive to motion across its field of view. ❒ Loosen the clamp screw in the sensor ball joint and gen- tly rotate the sensor.
4 595-5767-02 POSSIBLE CAUSE 1. A flood lamp is positioned too close to the sensor or pointed at nearby ob- jects that cause heat to trigger the sensor. (Reposition the lamp away from the sensor or nearby objects.) 2. Light Control is pointed toward a heat source like an air vent, dryer vent, or brightly-painted heat-reflective sur- face.
5 595-5767-02 Caractéristiques • Allume l’éclairage lorsqu’un mouvement est détecté. • Éteint automatiquement l’éclairage. • Photocellule qui maintient l’éclairage éteint pendant la période de lumière du jour. • La DEL indique qu'un mouvement a été détecté (jour ou nuit).
6 595-5767-02 INST ALLA TION Pour faciliter l’installation, choisir un appareil d’éclairage devant être remplacé et qui est déjà commandé par un interrupteur. Montage sous avant-toit Montage mural Pour éviter le risque de choc électrique, les commandes du détecteur doivent être tournées vers le bas.
7 595-5767-02 ESSAIS ET RÉGLA GES ❒ Mettre en circuit le disjoncteur et l’interrupteur d’éclairage. Le moins sensible Le plus sensible Détecteur Mouvement Mouvement Le détecteur est moins sensible au mouvement dans sa direction.
8 595-5767-02 CAUSE POSSIBLE 1. Un projecteur se trouve trop près du détecteur de la commande d’éclairage ou est pointé vers des objets tout près dont la chaleur déclenche le détecteur. (Éloigner le projecteur du détecteur ou des objets avoisinants) .
An important point after buying a device Heath Zenith SL-5412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heath Zenith SL-5412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heath Zenith SL-5412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heath Zenith SL-5412 you will learn all the available features of the product, as well as information on its operation. The information that you get Heath Zenith SL-5412 will certainly help you make a decision on the purchase.
If you already are a holder of Heath Zenith SL-5412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heath Zenith SL-5412.
However, one of the most important roles played by the user manual is to help in solving problems with Heath Zenith SL-5412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heath Zenith SL-5412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
