Instruction/ maintenance manual of the product 1902 Heartland
Go to page of 10
#1719 1050 Fountain St N. Cambridge, Ontario, Canada N3H-4R7 Phone: 1-877-650-5775 Cabinet Installation Instructions For Gas, Electric, Combination and W ood Stoves Please Read These Instructions Thoroughly Before Inst alling Y our Cabinet.
1 1. Removing Cabinet from Box ........................................................... 2 2. Assembly of Cresting panel ............................................................ 3 3. Installing Cabinets for Electric and Combination Stoves ......
2 Fig. 1 TWO PEOPLE ARE REQUIRED TO DO THE INST ALLA TION Cardboard corners Lift here Cardboard Cross brace - Remove the 4 cardboard corners. - Remove small box and its contents. - Remove the cardboard cross brace. - Remove the plastic wrapped cresting panel.
3 Assembly of Cresting Panel. Main Cabinet Cresting Panel (NOTE: if your cupboards are too low the cresting panel may be left off). Wingnut Locate cresting panel packed in bubble wrap. Unwrap the cresting panel and remove the wingnuts. Place the cresting panel on the rear of the top of the cabinet.
4 ELECTRIC AND COMBINATION STOVES ONLY STOVE T O P Gasket - Peel off backing and stick on. Bracket Sheet metaI screw (black) Steel Washer Machine screw (Nickel Plated) -Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation.
5 GAS STOVES ONLY STOVE T O P Gasket - Peel off backing and stick on. Bracket (WOOD STOVES SEE NEXT PAGE) Sheet metaI screw (black) Steel Washer N u t Machine screw (Nickel Plated) -Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation.
6 STOVE T O P Bracket -Remove the nuts, washers and screws located at rear edge of stove top (2 on SWEETHEART,4 on OVAL) and the 4 machine screws from the stove top. -With a helper, lift cabinet assembly from box by area that is circled. (See Fig. 1 Page 2).
7 Sheet metal screw 3 1/2" x 10" Exhaust adaptor If you are not venting outside, attach the deflector to the rear of cabinet with 4, sheet metal screws. If you are venting outside, attach the 3 1/2" x 10" exhaust adaptor with 4, sheet metal screws.
8 CONNECTING POWER TO THE CABINET COMBINATION AND ELECTRIC SELF CLEAN OR STANDARD STOVES ONLY (SEE NEXT PAGE FOR GAS STOVES) After your exhaust hood has been installed the very last thing to do is to connect the multipin plug to the range. The receptacle is located at the rear of the stove by the main power cord.
9 Models 7200, 9200 only Exhaust Hood Receptacle Locations male end of the cabinet power cord Po w er I n ( male rec e pt acle ) Exhaus t Hood In ( f e m al e r ec e pt ac l e, fr om c a bin et ) Powe.
An important point after buying a device Heartland 1902 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heartland 1902 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heartland 1902 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heartland 1902 you will learn all the available features of the product, as well as information on its operation. The information that you get Heartland 1902 will certainly help you make a decision on the purchase.
If you already are a holder of Heartland 1902, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heartland 1902.
However, one of the most important roles played by the user manual is to help in solving problems with Heartland 1902. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heartland 1902 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
