Instruction/ maintenance manual of the product SFE-MKLB3530PP Hearth and Home Technologies
Go to page of 9
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 1 TUV Listed as Model SFE-35C TM TM Model: SFE-CDLB3530PP CORTLAND Plug & Play SFE-MKLB3530PP MACKINTOSH Plug & Play INST ALLER/CONSUMER SAFETY INFORMA TION PLEASE READ THIS MANUAL BEFORE INST ALLING AND USING APPLIANCE.
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 2 Congratulations! Congratulations on selecting a Simplifyre electric fi replace. The unit you have selected is designed to provide the utmost in safety , reliability and ef fi ciency .
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 3 When using electrical heaters, basic precautions should always be followed to reduce the risk of fi re, electric shock and injury to persons, including the following: • T o prevent a possible fi re, do not block air intakes or exhaust in any manner .
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 4 The Optional W all Switch 4050-309 contains two single pole switches. (LEVITON 5634 Series or equal) The Optional W all Thermostat is a low voltage mechanical type.
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 5 12" 39" 39" 5" Alcove finished dimensions 39" H x 39" W x 12" D 2 2 F ireplace Dimensions Figure 2.
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 6 Ensure the appliance is connected to a properly grounded electrical outlet on a minimum 15 AMP circuit. If a new outlet is required, it should be installed by a quali fi ed electrician according to applicable building codes.
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 7 4 4 Elect ric al Wiring Projector Lamp S7 X1 Motor Interlock on Media Cabinet only Power Supply Module Hot Line .
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 8 E. Optional W all Switch / Thermostat Wiring Connections instructions The optional wall switch and thermostat wiring is low voltage and must be separated from power wiring.
Hearth & Home T echnologies Inc. • Plug & Play • 4050-317 Rev A • 04/08 10 7 7 Wa r r a n t y W arranty Hearth & Home T echnologies Inc. (HHT) Electric Fireplaces are tested and inspected prior to shipment and are guaranteed from defect to the purchaser of each new product.
An important point after buying a device Hearth and Home Technologies SFE-MKLB3530PP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hearth and Home Technologies SFE-MKLB3530PP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hearth and Home Technologies SFE-MKLB3530PP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hearth and Home Technologies SFE-MKLB3530PP you will learn all the available features of the product, as well as information on its operation. The information that you get Hearth and Home Technologies SFE-MKLB3530PP will certainly help you make a decision on the purchase.
If you already are a holder of Hearth and Home Technologies SFE-MKLB3530PP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hearth and Home Technologies SFE-MKLB3530PP.
However, one of the most important roles played by the user manual is to help in solving problems with Hearth and Home Technologies SFE-MKLB3530PP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hearth and Home Technologies SFE-MKLB3530PP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center