Instruction/ maintenance manual of the product DV3732SBI Hearth and Home Technologies
Go to page of 77
1 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Models: DV3732SBI DV3732SBIL • DO NOT store or use gasoline or other am- mab le vapo rs and li quids in th e vic inity of th is or any other appliance. • Whattodoifyousmellgas - DO NOT try to light any appliance.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 2 ListingLabelInformation/Location Model Name: ___________________________________________ Date purchased/.
3 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 4 = Contains updated information. 13Finishing A . S p l a t t e r G u a r d ................................. 5 3 B. Mantel and Wall Projections . . .
5 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 B. LimitedLifetimeW arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 6 B. LimitedLifetimeW arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor .
7 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 B. T emperedGlassSpecications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as dened by the Con- sumer Product Safety Commission (CPSC).
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 8 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented .
9 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 10 C. FanKit(optional) If desired, a fan kit may be added. Contact your dealer to order the correct fan kit. F . FixedGlass Assembly See Section 14.
1 1 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 I. LightingInstructions(IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 12 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool.
13 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 14 B. MaintenanceT asks-QualiedService T echnician The following tasks must be performed by a qualied ser- vice technician.
15 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 16 B. DesignandInstallationConsiderations Hearth & Home T echnologies direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases ex- pelled to the outside.
17 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 5 F ramingandC learances A. Selecting ApplianceLocation Whe n selec ti ng a l oca tio n for the appl ian ce it is impor tan t to con sid er the r equ ire d c le ara nce s t o wal ls (se e Fig ure 5.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 18 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase.
19 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 D. MantelandW allProjections W A RNI NG! Ri sk of Fir e! Co mp ly wi th al l mi nim um c le ar - an ces to co mb ust ibl es as sp eci ed .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 20 A. V entT erminationMinimumClearances RoofPitch H(Min.)Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .
21 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Figure6.3 MinimumClearancesforT ermination O N P R Q X = AIRSUPPL YINLET A = 12 inches.................clea ranc es a bove gra de, veranda, por ch, dec k o r b alc ony B = 12 inches.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 22 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies DVP and/or SLP venting systems. Refer to Section 16B for vent component information.
23 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 E. UseofFlexV ent The ex vent must be supported with the spacing between support intervals not ex- ceeding 4 feet, with no more than ½ inch sag between supports.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 24 V 1 Minimum** H 1 Maximum 90 Elbow Only** 2 ft. 610 mm 1/2 ft.** 152 mm 2 ft. 610 mm 1-1/2 ft.** 457 mm 3 ft. 914 mm 2-1/2 ft.** 762 mm 5 ft. 1.5 m 3-1/2 ft.
25 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 INST ALLED HORIZONT ALL Y H 1 H 2 V 1 1. T opV ent-HorizontalT ermination - (continued) Note : There MUST be a 25% re- duction in total H when using ex vent except when using the sim- ple up and out installation (see Figure 7.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 26 H 2 H 1 V 2 V 1 ThreeElbows V 1 Minimum** H 1 Maximum H 1 +H 2 Maximum 90 Elbow Only** 1-1/2 ft. 457 mm 2 ft. 610 mm 1/2 ft.** 152 mm 1-1/2 ft. 457 mm 4 ft.
27 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 2. T opV ent-V erticalT ermination Figure7.7 CAP V 1 V 1 =60ft.Max.(18.3m) T opV ent-V erticalT ermination NoElbows Figure7.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 28 Figure7.10 2.T opV ent-V erticalT ermination - (continued) ThreeElbows Figure7.9 T woElbows Note: Use SLP Series components only .
29 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 2.T opV ent-V erticalT ermination-( continued ) Four90ºElbows Figure7.1 1 V 1 MIN. H 1 MAX. V 2 MIN. H 2 MAX. V 3 MIN. 1 -1 / 2 f t .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 30 3. RearV ent-HorizontalT ermination Figure7.13 Figure7.12 NoElbows H 1 =9in.(229mm)Maximum RearV ent-HorizontalT ermination One45ºElbow Note : Use DVP Series components only.
31 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 INSTALLED HORIZONTALLY H 3 H 1 H 2 V 1 H 1 MAX. V 1 MIN. H 2 MAX. H 1 +H 2 MAX. 1-1/2 ft. 457 mm Back to back elbows 1 ft. 305 mm 2-1/2 ft. 762 mm 3 ft.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 32 4. RearV ent-V erticalT ermination IN STALLE D HO RI ZO NTALL Y H 1 H 2 V 1 Figure7.16 Figure7.17 V 1 MIN. H 1 MAX. 1 ft. 305 mm 3-1/2 ft.
33 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 V 1 MIN. H 1 MAX. H 2 MAX. H 1 +H 2 MAX. Back to back elbows 1-1/2 ft. 457 mm 1 ft. 305 mm 2-1/2 ft. 762 mm 1 ft. 305 mm 3-1/2 ft. 1.1 m 3 ft. 914 mm 6-1/2 ft.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 34 ClearancestoCombustibles: Refer to Section 5 for clearances to the appliance, man- tel, mantel legs and wall projection. Refer to Section 8 for pipe clearances to combustibles.
35 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 EXISTING CHIMNEY HEARTH FLOOR EXISTING CHIMNEY EXHAUST AIR VENT PIPE INLET AIR VENT PIPE T o minimize cold air drafts, seal with non-combustible insulation.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 36 A. PipeClearancestoCombustibles W ARNING! Risk of Fire! Maintain air space clearance to vent.
37 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Figure6.3 Figure6.4Installingthe AtticShield 3 F ASTENERS PER SIDE INSTALL ATTIC INSULAT.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 38 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc.
39 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 9 AppliancePreparation CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 40 B. RearV ent NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. N OT ICE : Once the seal c ap has been remo ve d it CANNO T be reattached.
41 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 C. SecuringandLevelingthe Appliance W ARNING! Risk of Fire! Prevent contact with: • Sagging .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 42 1 0 InstallingV entP ipe(D VPandSLPP ipe ) A.
43 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 B. AssembleV entSections(SLP PipeOnly) T o attach the rst vent component to the starting collars of the appliance: • Lock the vent components into place by sliding the pipe section onto the collar .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 44 Figure10.1 1AlignandDisassembleV entSections Figure10.10RotateSeamsforDisassembly Figure10.8SecuringV erticalPipeSections Figure10.
45 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 F. Install Decorative Ceiling Components (SLPonly) A decorative ceiling thimble can be installed on a at ceil- ing through which the vent passes.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 46 G. InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof.
47 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 SCREWS CAULK STORM COLLAR (1of3) Figure10.18 TERMINA TIONCAP I.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 48 T erminationCapSpecicationChart (depthwithoutusingadditionalpipesections) SL.
49 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 A. FuelConversion • Mak e sure the a ppli ance is co mpat ible with availab le gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies specied and approved parts.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 50 A. WiringRequirements NOTICE: This appliance must be electrically wired and grounded in accordance with.
51 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Figure12.1IntellirePilotIgnition(IPI)WiringDiagram TRANSFORMER W ALL SWITCH OR THE.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 52 WHT WHT BLK BLK GRN wire inside box Copper ground attached to GRN screw with GRN wire 14/2WG Cover Plate outside firebox Romex Connector F .
53 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 A. SplatterGuard The splatter guard is a piece of corrugated material used to protect the appliance during the installation process before nishing work on the whole hearth is complete.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 54 Step 5. Fold bottom ap along score line as indicated in Figure 13.6 and tuck into valve access area of appliance. Splatter guard should t securely on front of unit.
55 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 B. MantelandW allProjections W A RNI NG! Ri sk of Fi re ! Co mp ly wi th a ll mi n im um cl ear - an ces to co mbu sti ble s as s pec ie d.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 56 C. FacingMaterial • Metal front faces may be covered with non-combustible materials only . • Facing and/or nishing materials must not interfere with air ow through louvers, operation of louvers or doors, or access for service.
57 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 D. Doors Only doors certied for use with this appliance model may be used.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 58 MODEL DESCRIPTION P ART# ELEV A TED APPLIANCE DIMENSION SeeNote1 MARBLELEGCUT LENGTH SeeNote2 DV3732SBI DV3732SBIL KENWOOD CABINET KDC44SBP 0 29-3/8 in.
59 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 A. RemoveFixedGlass Assembly See Section 14.G. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 60 F . InstalltheLog Assembly Figure3LocatingReferencesforLog#1 CAUTION: Logs are fragile.
61 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Figure7 Figure8Log#3(SRV2158-702) Figure9 Figure10 MateslotCwithtabC M.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 62 L A TCHE S (BOTHBOT TOM AND T OP) GLASS ASSEMB L Y J. AirShutterSetting Air shutter settings should be adjusted by a qualied in- staller at the time of installation.
63 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 1 5 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 64 IntellireIgnitionSystem-(continued) Symptom PossibleCause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite.
65 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 1 6 ReferenceMaterials A. ApplianceDimensionDiagram D i m e ns io ns a re a ct ua l app lia nc e di me ns io ns . Us e fo r r e f e re nc e on ly .
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 66 B. V entComponentsDiagrams Figure16.2DVPventcomponents 10-1/2 in. (267 mm) 10-7/8 in. (276 mm) 45 ° 7-3/8 in.
67 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 DVP-HPC1 DVP-HPC2 DVP-TRAP1 DVP-TRAP2 DVP-HPCK1-B DVP-HPCK2-B DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 68 13-1/4 in. (337 mm) 24-5/8 in. (625 mm) 27-1/2 in. (699 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (337 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in.
69 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 DVP-TB1 BasementVent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 10-1/2 in. (267 mm) 3-7/8 in. (98 mm) DVP-TV VerticalTermination Cap 7-1/4 in.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 70 B. V entComponentsDiagrams (continued) 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) 10-7/8 in. 276 mm 10-1/2 in. 267 mm 3° 87° Effective Length 5-3/4 to 8-3/8 in.
71 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 8-3/4 in. 222 mm 6-1/2 in. 165 mm 6-5/8 in. 168 mm 6 in. 152 mm 6-1/2 in.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 72 B. V entComponentsDiagrams (continued) Figure16.9SLPSeriesV entComponents SLP-WT -BK W all Thimble-Black SL-2DVP Adapter 26 in.
73 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 1 in. (25 mm) 14 in. (356 mm) 3/8 in. (10 mm) 1 in. (25 mm) 7-1/4 in. (184 mm) 7-3/4 to 10-3/8 in. (197 to 264 mm) 13 in. 330 mm 13 in. 330 mm 1-5/16 in. 34 mm 10-9/16 in.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 74 Figure16.1 1CoaxialtoColinearV entComponents LINK-DV30B FlexLinerKit DV -46DV A-GCL Coaxial/Colinear ApplianceConnector DVP-2SL Adapter COAXIALtoCOLINEARVENTING B.
75 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 ServiceParts DV3732SBi BeginningManufacturingDate:Oct2009 EndingManufacturingDate: Active IMPORT ANT : THIS IS DA TED INFORMA TION.
Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 76 ServiceParts DV3732SBi BeginningManufacturingDate:Oct2009 EndingManufacturingDate: Active IMPORT ANT : THIS IS DA TED INFORMA TION.
77 Hearth & Home T echnologies • DV3732SBI, DV3732SBIL • 2215-900 Rev . F • 9/12 Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .reside.com D. ContactInformation Please contact your Hearth & Home T echnologies dealer with any questions or concerns.
An important point after buying a device Hearth and Home Technologies DV3732SBI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hearth and Home Technologies DV3732SBI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hearth and Home Technologies DV3732SBI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hearth and Home Technologies DV3732SBI you will learn all the available features of the product, as well as information on its operation. The information that you get Hearth and Home Technologies DV3732SBI will certainly help you make a decision on the purchase.
If you already are a holder of Hearth and Home Technologies DV3732SBI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hearth and Home Technologies DV3732SBI.
However, one of the most important roles played by the user manual is to help in solving problems with Hearth and Home Technologies DV3732SBI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hearth and Home Technologies DV3732SBI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
