Instruction/ maintenance manual of the product F3 Havis-Shields
Go to page of 5
WGI-F 1-F2-F3-F4_INST_7-08 INSTALLATION INSTRUCTIONS WGI-F1, F2, F3, F4 INTERIOR WINDOW GUARDS FOR 199 4 – 200 8 FORD WIND OW VA NS TOOLS REQUIRED: Power Drill 1/8” Drill Bit Phillips Screw Driver.
WGI-F 1-F2-F3-F4_INST_7-08 SIDE SLI DING DOOR WINDOW GUARD (F2-10): 1. A 14” long aluminum a ngle bracket is provided to attach to the rear v ertical section of the window frame. 2. This is necessary in order t o screw on the rear vertical section of window guard.
WGI-F 1-F2-F3-F4_INST_7-08 3. Notching Plastic: • The window trim fo r the first drivers’ side window (F1 -1) must be cut where the pop out window latches are located. • Mark the “V” shaped foot print of latch and cut pl astic trim. The latches will bolt back against metal at the origi nal location.
WGI-F 1-F2-F3-F4_INST_7-08 FORD VANS FULL SI ZE VAN WI NDOW G UARDS POSI TIONS MODELS WGI-F1 , F2, F3 AN D F4 POSITI ON #1 DRIVER SIDE FIRST WINDOW F1-1 POSITI ON #2 DRIVER SIDE SECOND WINDOW F1-2 POSITI ON #3 DRIVER SIDE THIRD WINDOW F1-3 POSITI ON #4 DRIVER SIDE REAR DOOR F1 - 4 POSITI ON #5 PASSENGE R SIDE REAR DOOR F1 - 5 POSITI ON #6 PASS.
WGI-F 1-F2-F3-F4_INST_7-08.
An important point after buying a device Havis-Shields F3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields F3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields F3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields F3 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields F3 will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields F3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields F3.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields F3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields F3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
