Instruction/ maintenance manual of the product TE 7-C Hilti
Go to page of 16
TE 7 - C Operating instructions en Mode d’emploi fr Manual de instrucciones es Manual de instruções pt.
1 Th is P ro du ct i s Li st ed Ce p ro du it e st h om ol og ué Pr od uc to h om ol og ad o po r Es te p ro du to e st á re gi st ra do.
2 4 5 6 7 8 9 3.
ORIGINAL OPERATING INSTRUCTIONS TE 7 ‑ C rotary hammer It is essential that the operating instruc- tions are read before the power tool is op- erated for the first time. Always keep these operating instructions together with the power tool. Ensure that the operating instructions are with the power tool when it is given to other persons.
Obligation signs Wear eye protection Wear a hard hat Wear ear protection Wear protective gloves Wear breathing protection Symbols Read the operating instructions before use Return waste material for recycling.
2.2 Chucks TE ‑ C CLICK chuck 2.3 Switches Speed control switch for smooth starting. Function selector switch: Drilling without hammering Hammer drilling Chisel adjustment (18 positions) Chiseling 2.4 Grips Vibration-absorbing, pivotable side handle with depth gauge Vibration-absorbing grip 2.
2.9 Using extension cords outdoors When working outdoors, use only extension cords that are approved and correspondingly marked for this application. 2.
Power tool TE 7 ‑ C Rated voltage 120 V Rated current input 6.3 A Mains frequency 60 Hz Weight of the tool, including side handle 3.5 kg Dimensions (L x W x H) 341 mm x 86 mm x 217 mm Drilling speed without hammering 0…900/min Hammer drilling speed 740/min Single impact energy 2.
5.1.3 Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
workpiece. Touching rotating parts, especially rotating insert tools, may lead to injury. e) Always lead the supply cord and extension cord away from the power tool to the rear while working. This helps to avoid tripping over the cord while working. f) Children must be instructed not to play with the power tool.
c) If the work involves breaking right through, take the appropriate safety measures at the opposite side . Parts breaking away could fall out and / or fall down and injure other persons. 5.3.5 Personal protective equipment The user and any other persons in the vicinity must wear ANSI Z87.
7.1.2 Fitting the insert tool 4 CAUTION Wear protective gloves when changing the insert tool. 1. Disconnect the supply cord plug from the power outlet. 2. Check that the connection end of the insert tool is clean and lightly greased. Clean it and grease it if necessary.
7.2.2 Drilling without hammering 8 1. Turn the function selector switch until it engages in the “Drilling without hammering” position. Do not operate the function selector switch while the motor is running. 2. Bring the side handle into the desired position and check that it is fitted correctly and secured.
The outer casing of the power tool is made from impact-resistant plastic. Sections of the grip are made from a synthetic rubber material. Never operate the power tool when the ventilation slots are blocked. Clean the ventilation slots carefully using a dry brush.
Fault Possible cause Remedy The power tool doesn’t achieve full power. The extension cord’s conductor cross section is inadequate. Use an extension cord with an ad- equate conductor cross section. (Please refer to the “Description” section.) The control switch is not pressed fully.
*202931* 202931 Hil ti Corp orati on LI- 949 4 Sch aan T e l. :+ 423 / 23 42 1 11 Fax :+ 423 / 23 42 9 65 www .hi lti.co m Hilti = r egistered t radem ark of H ilti Co rp., Sc haan W 3090 0406 00-Po s. 3 1 Printe d in Chin a © 2006 Right o f tech nical a nd prog ramme c hanges rese rved S.
An important point after buying a device Hilti TE 7-C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hilti TE 7-C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hilti TE 7-C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hilti TE 7-C you will learn all the available features of the product, as well as information on its operation. The information that you get Hilti TE 7-C will certainly help you make a decision on the purchase.
If you already are a holder of Hilti TE 7-C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hilti TE 7-C.
However, one of the most important roles played by the user manual is to help in solving problems with Hilti TE 7-C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hilti TE 7-C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
