Instruction/ maintenance manual of the product TORCH KIT 94903 Harbor Freight Tools
Go to page of 8
SOLDERING IRON T ORCH KIT Model 94903 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
SKU 94903 F or technical questions please call 1-800-444-3353 P age 2 SPECIFICA TIONS Fuel Required Butane T orch Diameter 0.540” O .D . / 0.066” I.D . Blade T emperature 500° F Igniter Piezo This kit includes 5 soldering tips: Hot Knif e, P ointed Tip , Slant Cut Tip , Cut P ointed Tip and Rounded Tip.
SKU 94903 F or technical questions please call 1-800-444-3353 P age 3 Do not overreach . Keep proper footing and balance at all times. Do not reach over or across running machines. Maintain tools with care . Keep tools maintained and clean for better and safer performance.
SKU 94903 F or technical questions please call 1-800-444-3353 P age 4 UNP ACKING When unpacking, check to make sure that all accessories listed below are included, and that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at: 1-800-444-3353.
SKU 94903 F or technical questions please call 1-800-444-3353 P age 5 OPERA TION Igniting and Extinguishing The T orch: T o ignite the torch push the Gas “On/Off ” Switch f orward to wards the tip until the Gas “On” Lock b utton pops out. This will loc k the Gas “On/Off ” switch in the “On” position.
SKU 94903 F or technical questions please call 1-800-444-3353 P age 6 Flame Adjustment: T o adjust the ame, move the “Flame Adjustment Lever”, located under the torch, toward the “+” to increase the ame or toward the “-” to reduce the ame.
SKU 94903 F or technical questions please call 1-800-444-3353 P age 7 MAINTENANCE Relling the Butane Canister: W ARNING: Do not use any other fuel other than butane which is specically de - signed for this type of torch. Use of any other fuel may result in severe per- sonal injury .
SKU 94903 F or technical questions please call 1-800-444-3353 P age 8 SOLDERING HINTS The soldering process bonds two metal objects together using a metallic bonding material (solder) which has a lower melting point than the items being joined. Sol- dering is not appropriate for non-metallic objects such as plastic or wood.
An important point after buying a device Harbor Freight Tools TORCH KIT 94903 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools TORCH KIT 94903 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools TORCH KIT 94903 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools TORCH KIT 94903 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools TORCH KIT 94903 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools TORCH KIT 94903, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools TORCH KIT 94903.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools TORCH KIT 94903. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools TORCH KIT 94903 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
