Instruction/ maintenance manual of the product CENTRAL PNEUMATIC 46309 Harbor Freight Tools
Go to page of 11
AIR BRAD NAILER ASSEMBL Y and OPERA TING INSTRUCTIONS Model 46309 Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .harborfreight.com Copyright © 2001 by Harbor Freight T ools ® .
SKU 46309 Page 2 For technical questions, please call 1-800-444-3353. Brad Size .039-.042” Shank (18 Gauge), 3/8” to 2” long Magazine Capacity 100 Operating PSI 55-95 PSI Air Inlet Size 1/4” N.
SKU 46309 Page 3 For technical questions, please call 1-800-444-3353. 8. Use eye and ear protection . Always wear ANSI approved impact safety goggles and appropriate hearing protection. Wear a full face shield if you are producing metal lings or wood chips.
SKU 46309 Page 4 For technical questions, please call 1-800-444-3353. It is also possible that the use of an extension cord may cause your circuit breaker to trip or your panel fuse to break. If this happens, either use the compressor without an extension cord or nd a larger amperage circuit to use.
SKU 46309 Page 5 For technical questions, please call 1-800-444-3353. T esting the Full Sequential Safety T rip Mechanism W arning: Even though the nailer should be empty during this procedure, A LWA Y S point the nailer at a piece of scrap wood when testing.
SKU 46309 Page 6 For technical questions, please call 1-800-444-3353. Operating the Nailer 1. Attach the Nailer to the air supply at the Air Inlet (38) . Start your compressor and check the pressure making sure it is set at the recommended 55-95 PSI and not to go over the maximum 95 PSI.
SKU 46309 Page 7 For technical questions, please call 1-800-444-3353. Anytime any maintenance or repairs are done (including clearing jams), FIRST : 1.
SKU 46309 Page 8 For technical questions, please call 1-800-444-3353. Anytime any maintenance or repairs are done, FIRST : 1. Disconnect the Nailer from the air hose. 2. Empty the Magazine (60) completely . 3. Attempt to re the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of ring any brads.
SKU 46309 Page 9 For technical questions, please call 1-800-444-3353. NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 46309 Page 10 For technical questions, please call 1-800-444-3353. Assembly Drawing Maintenance W arning! Always disconnect the tool from the air compressor and then empty the magazine of nails before attempting to inspect or perform maintenance to the Nailer .
SKU 46309 Page 1 1 For technical questions, please call 1-800-444-3353. 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability stand.
An important point after buying a device Harbor Freight Tools CENTRAL PNEUMATIC 46309 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools CENTRAL PNEUMATIC 46309 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools CENTRAL PNEUMATIC 46309 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools CENTRAL PNEUMATIC 46309 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools CENTRAL PNEUMATIC 46309 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools CENTRAL PNEUMATIC 46309, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools CENTRAL PNEUMATIC 46309.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools CENTRAL PNEUMATIC 46309. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools CENTRAL PNEUMATIC 46309 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
