Instruction/ maintenance manual of the product 97925 Harbor Freight Tools
Go to page of 18
19.2V CORDLESS IMP ACT WRENCH (V ARIABLE SPEED) Model 97925 99676 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
Page 2 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury .
Page 4 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Use safety equipment. Always wear ANSI-approved eye protection. b. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec - tion used for appropriate conditions will reduce personal injuries.
Page 5 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Battery tool use and care 5. Recharge only with the charger specied by the manufacturer . A charger that is a. suitable for one type of battery pack may create a risk of re when used with an - other battery pack.
Page 6 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. T o reduce vibration, maintain the tool as explained in this manual. If any abnormal 7. vibration occurs, stop use immediately . Drill and Impact Drill Safety W arnings Wear ear protectors with impact drills.
Page 7 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
Page 8 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Grounded T ools: T ools with Three Prong Plugs T ools marked with “Grounding Required” have a three wire cord and three prong 1. grounding plug. The plug must be connected to a properly grounded outlet.
Page 9 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. ity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See T able A.) When using more than one extension cord to make up the total length, make sure 3.
Page 10 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Drive Size 97925:1/2" 99676: 3/8” Charger Input 120 V~, 60 Hz, 80W Charge T ime 97925: 1 Hour Speed 97925: 0-2,000 RPM 99676: 0-2,500 Maximum T orque 97925: 350 ft-lb 99676: 200 ft-lb Battery Cell T ype 19.
Page 1 1 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Impact Wrench, and the Charger is unplugged from an electrical outlet prior to making any adjustments to the tool. T rigger: Squeeze the T rigger to turn the Impact Wrench on and release pressure on the T rigger to turn the Impact Wrench off.
Page 12 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. pull the T rigger after the tool’s performance begins to diminish. Stop the tool, re- charge the battery , and use the fresh battery for optimal performance Do not recharge the Battery longer than 2 hours, as damage to the Battery and/or 3.
Page 13 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Insert the socket onto the nut that is to be loosened/tightened. 5. Hold the Impact W rench rmly with both hands, as torque from the Motor will cause 6. the tool to twist.
Page 14 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. When installing the Carbon Brushes, make sure the carbon portion of the Carbon 4. Brushes contact the Motor ’s Rotor and that the springs face away from the Motor . Also, make sure the springs operate freely .
Page 15 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Part Description Qty 01 Front Cover Assembly 1 02 Rubber W asher 1 03 W asher 1 04 Front Impact Assembly 1 05 Rear Impact .
Page 16 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. 97925 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead.
Page 17 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. Part Description Qty 01 Front Cover Assembly 1 02 Rubber W asher 1 03 W asher 1 04 Front Impact Assembly 1 05 Rear Impact .
Page 18 SKU 97925, 99676 For technical questions, please call 1-800-444-3353. 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabilit.
An important point after buying a device Harbor Freight Tools 97925 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 97925 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 97925 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 97925 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 97925 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 97925, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 97925.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 97925. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 97925 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
