Instruction/ maintenance manual of the product 97004 Harbor Freight Tools
Go to page of 7
WIRELESS DOORBELL Model 97004 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 97004 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 97004 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury . SA VE THESE INSTRUCTIONS Work area safety Keep work area clean and well lit.
Page 4 SKU 97004 For technical questions, please call 1-800-444-3353. SA VE THESE INSTRUCTIONS. SPECIFICA TIONS Construction Polystyrene transmitter and receiver , steel mounting hardware and thermoplastic anchors T ransmitter Battery (1) V A23A, MS21/MN21, A23S, 12V , Alkaline (included) Receiver Battery (2) AA, 1.
Page 5 SKU 97004 For technical questions, please call 1-800-444-3353. Assembly Installing and Replacing Batteries Receiver Battery Compartment Battery Cover (3) Figure 1 Y ou will have to install 2 “AA” Batteries in the Receiver (2). Remove the Battery Cover (3) located on the back of the Receiver (2)-see Figure 1.
Page 6 SKU 97004 For technical questions, please call 1-800-444-3353. The Wireless Doorbell can be mounted with two-sided Mounting T ape (5/6). Remove backing from the Mounting T ape (5/6). Attach the backing to the T ransmitter and/or Receiver and press it into place.
Page 7 SKU 97004 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM 1 2 5 6 7 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
An important point after buying a device Harbor Freight Tools 97004 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 97004 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 97004 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 97004 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 97004 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 97004, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 97004.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 97004. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 97004 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
