Instruction/ maintenance manual of the product 95964 Harbor Freight Tools
Go to page of 21
5.5 HP CHIPPER/SHREDDER Model 95964 OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2007 by Harbor Freight T ools ® .
Page 2 SKU 95964 For technical questions, please call 1-800-444-3353. REV 07h, 08e SPECIFICA TIONS Chipper Chute Capacity 1-1/4” Maximum Diameter Chipper Dimensions 2-3/4” x 2-3/4” Square openin.
Page 3 SKU 95964 For technical questions, please call 1-800-444-3353. GENERAL SAFETY W ARNINGS W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury .
Page 4 SKU 95964 For technical questions, please call 1-800-444-3353. Store the Chipper/Shredder out of reach of children and other untrained per- 12. sons. The Chipper/Shredder is dangerous in the hands of untrained users. Keep children away from this product when in use.
Page 5 SKU 95964 For technical questions, please call 1-800-444-3353. Be extremely cautious of the rotating Blades in the Chipper/Shredder . 7. Never allow your hands, ngers, or any other part of your body to enter the Chipper or Shredder hopper units.
Page 6 SKU 95964 For technical questions, please call 1-800-444-3353. Keep the Chipper/Shredder , its Engine, and surrounding areas clean at all 2. times. When fuel or oil spills, it must be cleaned up immediately . 3. Dispose of uids and cleaning materials as per any local, state, or federal codes and regulations.
Page 7 SKU 95964 For technical questions, please call 1-800-444-3353. ENGINE INSTRUCTIONS Before starting the Engine CAUTION! Y our warranty is voided if you do not put engine oil in the Engine’ s crankcase prior to its rst use. ST ARTER RECOIL GRIP The Engine MUST be lled with a high quality engine oil.
Page 8 SKU 95964 For technical questions, please call 1-800-444-3353. Oil Instructions Filling Engine Oil: Note: Check oil level only when Engine is stopped and on a level surface. Wipe the immediate surrounding area of the Oil Fill Cap. Unscrew and remove 1.
Page 9 SKU 95964 For technical questions, please call 1-800-444-3353. Filling the Fuel: Prior to the initial use of the Chipper/Shredder , the fuel tank MUST be lled with 1. approximately one half gallon of unleaded gasoline with a pump octane rating of 86 or higher .
Page 10 SKU 95964 For technical questions, please call 1-800-444-3353. Reinstall the Air Cleaner , making sure that the gasket is in place. 6. Spark Plug Recommended spark plugs : BPR6ES (NGK ® ), W20EPR-U (Denso ® ), or equivalent. T o check the spark plug.
Page 1 1 SKU 95964 For technical questions, please call 1-800-444-3353. As engine warms up, gradually move the Choke lever to the “OPEN” position. 6.
Page 12 SKU 95964 For technical questions, please call 1-800-444-3353. Before storing, unhook spark plug wire from spark plug, drain all fuel out of the En- 3. gine’s Fuel T ank. If this is not done, old fuel in the Fuel T ank may clog the Carbu- retor of the Engine and prevent it from starting until cleaned out.
Page 13 SKU 95964 For technical questions, please call 1-800-444-3353. TROUBLESHOOTING PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P AR TS LIST AND ASSEM- BL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
Page 14 SKU 95964 For technical questions, please call 1-800-444-3353. SCHEMA TIC ASSEMBL Y DIAGRAM.
Page 15 SKU 95964 For technical questions, please call 1-800-444-3353. Part Description Qty 1 Engine 1 2 Screw M5 x 12 8 3 Safety Pressboard 1 4 Lock Nut M5 8 5 Rubber Board 1 6 Fixed Board 1 7 Bearin.
Page 16 SKU 95964 For technical questions, please call 1-800-444-3353. CHIPPER/SHREDDER ASSEMBL Y DIAGRAM.
Page 17 SKU 95964 For technical questions, please call 1-800-444-3353. ENGINE P ARTS LIST Part Description Qty 1A Flange Bolt M6x12 4 2A Head Cover 1 3A Head Cover Packing 1 4A Breather T ube 1 5A Locknut 2 6A Adjusting Nut 2 7A Rocker Arm 2 8A Rocker Bolt M8 2 9A Ex.
Page 18 SKU 95964 For technical questions, please call 1-800-444-3353. ENGINE ASSEMBL Y When ordering engine parts, add an “A” sufx to the part number .
Page 19 SKU 95964 For technical questions, please call 1-800-444-3353. Emission Control System W arranty California and United States Emission Control Defects W arranty Statement The Californ ia Air R.
Page 20 SKU 95964 For technical questions, please call 1-800-444-3353. (f) alterations by changing, adding to or removing parts from the engine. 5. Service and Maintenance Component parts which are no.
Page 21 SKU 95964 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools 95964 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95964 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95964 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95964 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95964 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95964, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95964.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95964. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95964 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center